VGA plugin into sony crt projector

want to buy

Those can be difficult to find. You are much better off using the standard RGBHV input, and just buying an RGBHV->VGA breakout cable. They are cheap and not difficult to find.

Actually, I think that card has a DB9 input, which is not the standard DB15 VGA input. I would probably be difficult to find the proper DB9(male)-DB15 cable as well.

Use the 5 bnc connectors on your projector to connect a vga - rgbhv breakout cable. the cable is cheap and easily made or bought. The hdfury uses a very short (6") breakout cable of the same type to connect to your projector also.

Those can be difficult to find. You are much better off using the standard RGBHV input, and just buying an RGBHV->VGA breakout cable. They are cheap and not difficult to find.

Actually, I think that card has a DB9 input, which is not the standard DB15 VGA input. I would probably be difficult to find the proper DB9(male)-DB15 cable as well.

Is that what's the card is numbered? I just bought a PC-1271 switcher. It has 5 Svideo cards (IFB-1000?), 1 RGBHV input, and 1 DB9 input. I pulled the DB9 input and I didn't see an IFB #, just the sony part #.

There's an IFB-20 on ebay right now, has db-9: item # 22020904612

There's an IFB-20 on ebay right now, has db-9: item # 22020904612

That would be item #220209046123 And it looks exactly like what I have. Looks like I have another adapter to make.

Hi what your looking for is the IFB21 which has two hd15 pin vga connectors one in and one out for loop through, these can be fitted into a vacant ifb slot on your pj or a spare slot on the sony pc1271m switcher which is how i use them, further info on the card it has an RGB bandwidth of 150mhz and i think you can see them on either the G70 or G90 sales brochure found on curts site.