Good morning all ,

Could anyone with the Display 2 sensor help me with the initial setup with HCFR?

I have search around and all i am finding is instructions to setup with the Spyder II

Thanks

There actually is a fair amount of information in the Master HCFR thread, but it is a little unwieldy (although it is possible to just search that thread.) Basically, you need to make sure that the Eye-One.dll driver is in the HCFR folder, and then connect the Eye-One to the computer. When HCFR starts up, select the Eye-One probe and then choose which type. You probably want to let the probe sit on the running TV for a little while (most recommendations are 20-30 minutes) to allow the temperature to normalize. After that, you'll do a dark level calibration (which can be found in the sensor setup menu, called calibrate internal offsets) by ensuring that all light to the sensor is blocked and then initiating the dark level calibration. After that is complete, start your measurements. I don't think I've missed any steps, but if all else fails, there really is a lot of information in the HCFR threads. Hope that helps!

Thanks a lot for the info really appreciated

I did not use those steps but when i first try to do a continuous reading pressing the green play button it asks me to place it on a planar suface to calibrate? what is that?

Athanasios

The planar surface thing is the dark level calibration.

Kal