I have a M-4000 P with version 2.2.7 A firmware and I am having a problem with connection over a network.
I am using a static Wired IP address
When I start the box it works and I can stream from and too box on the network but about 5 minutes in I can no long connect to the dvico.
I have ran a ping and pings fine for first 5 minutes and then pings stop. the lights on the NIC continue to flash but can't ping on connect in or out?

Any Ideas?

Incompatibility with the router...? Happen to have a d-link?
Try connecting the TViX to PC over cross cable and run test again. My bet is the link between router/switch and DViCo is lost. You can try DHCP for a change to see if it ;akes any difference (doubt it)

You failed to mention whether it worked before...

I had it connected via a linksys WRT54GP router. Now I have it connected to a netgear GB switch which has a BT Modem connected to the switch. I have tried both DHCP and Static. I have tried connecting Dvico next to router. Same result. I have tried changing Firmware to 2.2.0 same

This is my first time trying to get it work work on the network.

Still no Joy Wonder if I have a Hardware Issue.
Anyone have any other ideas?

Having the same problem after firmware upgrade to 2.2.7 A.

Any news?

NO still not heard anthing. PLease let me know if you here anything and I will do the same.

I am on another forum and someone told me to try a cross over cable direct to PC to eleminate the network and/or router. I haven't got one so I will try and get one and try. If you have any luck let me know

I have been onto Dvico and they have declared this a Hardware fault