I own two obsolete ECP 2000 projectors. Where can I find the manual?

Sheesh, even my site doesn't have that!

http://www.curtpalme.com/ElectrohomeECP_Downloads.shtm

There's not too much to learn on these, all controls are accessible externally and are labelled. I'd ju7st play with them and figure out what they do. If you want 2 more dead ones, I have them here. You won't be able to stack those sets, nowhere near enough convergence range on those beasties..:(

You won't be able to stack those sets, nowhere near enough convergence range on those beasties..:(

How about a blend, Curt? ;)

What I actually might have is a:

CadCam 7" SD187 Digital 725 15,000 30-71 45-100 60 60-250+ 1024x768 Y V/R - - N -
# Serial numbers are 100300010 and 100300005
# Product code is 38-B055 64-71

Is there any difference between a CadCam and a 2000 besides bandwidth? Is there any way to tell the difference?

Looks like this:

http://i9.ebayimg.com/08/i/000/eb/2f/8693_1.JPG

That top thing with all the wires is the driver box, since the first E-Home projectors didn't have any way of processing video internally.

If I have a CadCam, is 60 mhz BW enough for 1920x1080i@72 hz?

Sheesh, even my site doesn't have that!

http://www.curtpalme.com/ElectrohomeECP_Downloads.shtm
Someone send me the manual (if it exists) and I'll stick it up there!

Kal

I have downloaded a manual for an ECP 2000 projector recently from http://www.crtinfo.us.vu, as I had an ECP 1000 and 2000 projector (with stand and carry case!) pass through my home. Bought out of curiosity but much too big to hang on to!

Cost me $7, used PayPal, and all was okay.

Hope this helps.

Best regards, Ian.