View Full Version : Help - Sony CRT RPTV Losing its Digital Channels


TonyS
06-13-08, 07:06 AM
About a week ago, I noticed that my Sony KDP-51WS655 had lost its digital channels. So, I reran the auto program and it found them again. A couple of days ago, I turned the TV back on and again noticed it had lost its digital channels. Since we were watching a DVD, I didn't bother to reprogram it right then. Yesterday when I got home from work, I turned it on and reran the auto program. I confirmed that it found all the digital channels and shut it off. Later last night, I turned it on so we could watch a DVD and decided to check the digital channels. Once again they were gone! I noticed that the analog channels were still there but the TY wouldn't cycle through them using the CH + or - buttons. It would only access the analog channels if I directly punched them in by number. It appears that every time I shut the TV off, it purges its channel progamming. BTW, I am running basic cable directly to the TV so there is no cable box involved. I used to get all the networks in HD plus a bunch of random digital channels. My relatively-new LG 37LG50 LCD TV in the other room is fine and hasn't lost its channels so I don't think this is an issue with the incoming signal. Any thoughts?

Thanks in advance!

TonyS
06-14-08, 10:29 AM
OK, last night I tried unplugging cable TV and my OTA antenna to the unit and reran the auto program as I heard this will "clear" the programming. After I did that I hooked everything up and reran the auto program. Once again, it found all the channels - both analog and digital. I then shut the TV off, turned it back on and "BOOM" all the channels were gone as before. Is the tuner in the TV shot?

Bill
06-15-08, 12:44 AM
Try unplugging the set.

TonyS
06-15-08, 08:11 PM
Thanks for the idea Bill! Not sure why I didn't think of it myself?!? :confused: Anyway, I unplugged the TV for a couple of hours and I also tried a full reset (as described in the manual) and neither worked. I still lose all my channels when I turn the TV off - the digital ones are completely gone and the analog ones are there, but only by directly punching the numbers in. I still get some HD via OTA. I'm beginning to think the QAM tuner is shot. :mad: I think I'll unplug it for the night and try again tomorrow night...