I have never posted in this forum but I am not sure where my problem lies. I Have the following gear. This was working about 2 weeks ago. Everything Syncing Properly at 1080i.

Verizon HD Box: QIP6200 P2
Toshibia HD-A35 HDDVD Player
Yamaha RX-V663 HDMI Reciver
DVDO HD+ Scaler
Hitachi 51SWX20B CRT RPTV

I am having Sync Issues with Everything HDMI. I did a reset of the Cable Box, unplug and reset the HD+ Scaler. If I go direct to the TV everything Syncs correctly. Just when I use the Scaler it just "Blinks on and off". It sees which ever device at 1080i but every 5 sec it says no signal and then back on again. It is passing video, meaning the Interface comes up blue and I see the menu. I have the cable box comming in driect to the Scaler via Component to let me watch TV. It will not Sync when it is set to HDMI. Anybody ever have this issue? Should I move to another scaler that take more Digital Inputs like the Edge? or Step to the VP30? Any Ideas would be great! Thanks Andrew

Since you can see the iScan menu, I would look at the input signal selection. If it is set to auto I would try selecting each input separately and see it that works.

No dice that is the way I select them now. I have never set it to auto.