pimpee
08-31-08, 08:20 PM
i've been trying to calibrate my 42 inch plasma recently as sometimes i see a red outline to the left of the image. sort of like a shadow of a red line. the issue is slight but clearly visible when i move the screen to the extreme edge where i can see a blue line on the right side and a red line on the left. from what i've read, i need to do convergence on the unit but there seems to be 2 schools of thought on what the issue is and i was wondering if people can help clarify the issue.
1 a lot fo people with this issue points to the logical board and it seems that no amount of calibration can be done since it's a bad chip
2. white point calibration in factory service menu but i was afraid of playing with the settings too much. here are my settings:
White Balance:
color temp: Normal
WhitePoint red: 127
whitepoint green: 69
whitepoint blue: 72
red balance level: 7
green balance level: 5
edit: forgot to add the source
windows media center vista edition
video card: ati 3450 HD
most noticeable when paying attention to white side lines of a tennis court
1 a lot fo people with this issue points to the logical board and it seems that no amount of calibration can be done since it's a bad chip
2. white point calibration in factory service menu but i was afraid of playing with the settings too much. here are my settings:
White Balance:
color temp: Normal
WhitePoint red: 127
whitepoint green: 69
whitepoint blue: 72
red balance level: 7
green balance level: 5
edit: forgot to add the source
windows media center vista edition
video card: ati 3450 HD
most noticeable when paying attention to white side lines of a tennis court