can you please measure for me the distance between the wall mounting holes from left to right and from up and down.. please help me out i cant find this anywhere

no one can help.. i got the cut sheets from panasonic but they dont make any sense . it just gives a number but doesnt tell me if its inches or mm.

Let me get this straight, you want someone to pull their TV off the wall for you?

Let me get this straight, you want someone to pull their TV off the wall for you?
no. i thought someone wouldnt have it mounted or is just getting one.

anyway here is the spec sheet for the TH-58PZ800U i got from panasonic tonight
http://www.s10owners.com/gallery2/d/1835-4/th58pz800uspecsheet.JPG
FULL PICTURE (http://www.s10owners.com/gallery2/d/1839-3/th58pz800uspecsheet.JPG)
and here is the spec sheet for the TH-58PZ850U
http://www.s10owners.com/gallery2/d/1838-4/th58pz850uspecsheet.JPG
FULL PICTURE (http://www.s10owners.com/gallery2/d/1840-3/th58pz850uspecsheet.JPG)
the reason i asking this question is when i called panasonic today i got different answers to what these measurements where now look at there link for FAQ for the TH-58PZ850U look at question #3 (http://www2.panasonic.com/consumer-electronics/support/FAQs/details-FAQs+for+TH58PZ850+Plasma+TV-UCM_PRD_CNT_007865#faq3)

someone help me understand this.
i also have most all other 2008 models for the spec sheet

full pictures are HERE (http://www.s10owners.com/gallery2/v/chevy01xtreme/misc/?g2_page=2)

This spec lists the spread at 18.9 (320)....320mm is 12.6"

Let me get this straight, you want someone to pull their TV off the wall for you?I didn't get that from his post. Obviously some owners are using the table stand, in which case they can easily take a few measurements from the backside.

Sorry for being a dickhead.

Left to right is 26 2/16 "
Up and down is 12 9/16 "

Measurments are from center to center . Hope this helps

Just curious as to why you need these dimensions? You still need to purchase a wall mount, which is standards-based, so that is what determines how you mount it.

Or are you building your own mount? Again, since your question is answered, I'm just curious.

can you please measure for me the distance between the wall mounting holes from left to right and from up and down.. please help me out i cant find this anywhere



Chevy .... the 320mm x 660mm is correct. 320mm = 12.598 inches (the 18.9 inches shown in the picture is a misprint). 660mm = 25.984 inches. So to round up it's close enough to say the pattern is 12-9/16 x 26.

BTW, this pattern is the same on all Panasonics PDPs, even my little 37" has this bolt pattern :)

Just curious as to why you need these dimensions? You still need to purchase a wall mount, which is standards-based, so that is what determines how you mount it.

Or are you building your own mount? Again, since your question is answered, I'm just curious.Sometimes looking at a person's post history reveals insight to why he's asking a particular question :)

http://www.avsforum.com/avs-vb/showthread.php?t=1070841&highlight=

http://www.s10owners.com/gallery2/d/1843-3/DSCN0360.JPG

Just curious as to why you need these dimensions? You still need to purchase a wall mount, which is standards-based, so that is what determines how you mount it.

Or are you building your own mount? Again, since your question is answered, I'm just curious.
because when i called panasonic they where going by the misprint and when i was searching for a mount nothing was right for the plasma. i kept telling panasonic they wher ewrong. out of the 4 tech's i called /chatted with 2 of them where giving me the right answer and the other 2 said they where wrong and then i called to another one and i told him about the misprint after panasonic emailed me the spec sheets to there tv's..

and i got my stand i wanted and now just waiting for the plasma to get here.

picked up my hdtv box today and got my apc H15 today.. waiting on my a/v receiver to get here and picking a bd55 when it comes out.. :) and getting speakers soon.. am i missing anything... else...

Chevy .... the 320mm x 660mm is correct. 320mm = 12.598 inches (the 18.9 inches shown in the picture is a misprint). 660mm = 25.984 inches. So to round up it's close enough to say the pattern is 12-9/16 x 26.

BTW, this pattern is the same on all Panasonics PDPs, even my little 37" has this bolt pattern :)


yea thanks... i am good.. the bello FP-2125 mounts upto 800x400 ... :) yea panasonic then told me everything is vesa standard

because when i called panasonic they where going by the misprint and when i was searching for a mount nothing was right for the plasma. i kept telling panasonic they wher ewrong. out of the 4 tech's i called /chatted with 2 of them where giving me the right answer and the other 2 said they where wrong and then i called to another one and i told him about the misprint after panasonic emailed me the spec sheets to there tv's..

and i got my stand i wanted and now just waiting for the plasma to get here.

picked up my hdtv box today and got my apc H15 today.. waiting on my a/v receiver to get here and picking a bd55 when it comes out.. :) and getting speakers soon.. am i missing anything... else...

Just a comfy chair and a good supply of popcorn!:D