hey folks,

i've got a problem with the on screen display of my Sony KDF E50A11E.
I did some changes in the service menu because i had the 60hz-ghost-problem:

"Service" Menü,
TV in standby mode,then press in sequence :

i+
5
Volume Up
Analog

The TV should switch on and when it's warmed up, you should see a screen with lots of big green lettering on it.
Press the "menu" button ( middle bottom )
Use the direction dial to move down to "LCD Drivers" and press right on the dial to enter this menu.

Move down to "S H Pos Reg R". It should be "10", change it to "11". ( Left/Right to adjust )
Move down to "S H Pos Reg G". It should be "10", change it to "11".
Move down to "S H Pos Reg B". It should be "10", change it to "11".

Press the menu bottom to drop out of the menus, and the standy button to drop to standby. Switch back on, and hopefully your ghosting will be gone. Mine was, haven't noticed any side effects, seems ok."

Since i restarted the tv, the on screen display for the actual channel (e.g. HDMI or AV1) does not disappear anymore.

Could you please tell me what i can do to resolve this problem... :rolleyes:

Thanks in advance
Tobias