View Full Version : Alpine SWS-1043D vs JL 10W3V3


clokwork
11-17-08, 09:51 PM
I have a 250 watt class D amp to push either of these subs. I want a single 10" woofer for a separate car (not the G) which would you suggest. I have narrowed it down to these two.

http://akamaipix.crutchfield.com/products/2007/500/h500SWS1043-o-1p.jpg

http://akamaipix.crutchfield.com/products/2007/136/p13610W3V34-o.jpeg

images taken from crutchfield.com

Here are the specs:

Jl Audio:

Size 10 -inch
Impedance 4 ohms
Cone Material Mineral-filled poly
Surround Material Rubber
Sealed Box Volume (cubic feet) 0.625
Ported Box Volume (cubic feet) 1.125
Port diameter (inches) N/A
Port length (inches) N/A
Free-Air No
Dual Voice Coil No
Sensitivity 84.87 dB at 1 volt
Frequency Response 25 - 250 Hz
RMS Power Range (Watts) 100-500
Peak Power Handling (Watts) 1000
Top Mount Depth (inches) 5 7/8
Bottom Mount Depth (inches) N/A
Cutout Diameter or Length (inches) 8 15/16
Vas (liters) 32.23
Fs (Hz) 31.49
Qts 0.485
Xmax (millimeters) 14
Parts Warranty 1 Year
Labor Warranty 1 Year

Alpine:

Size 10 -inch
Impedance 4 ohms
Cone Material Glass Fiber & Pulp/Kevlar
Surround Material Santoprene rubber
Sealed Box Volume (cubic feet) 0.65 - 1.5
Ported Box Volume (cubic feet) 1 - 1.75
Port diameter (inches) N/A
Port length (inches) 14
Free-Air No
Dual Voice Coil Yes
Sensitivity 84 dB at 1 volt
Frequency Response 31 - 700 Hz
RMS Power Range (Watts) 50-300
Peak Power Handling (Watts) 900
Top Mount Depth (inches) 4 1/4
Bottom Mount Depth (inches) N/A
Cutout Diameter or Length (inches) 8 7/8
Vas (liters) 30
Fs (Hz) 34
Qts 0.68
Xmax (millimeters) 12.8
Parts Warranty 1 Year
Labor Warranty 1 Year



Thanks!!