My HLN467W was making a whirring noise and the colors had turned greenish. The noise would go away as soon as I turned the set off.

So, I replaced the color wheel that seemed fully intact and that fixed the greenish color problem, but two new problems developed:

1. The image shifted down by half an inch and the service menu adjustment is not enough to compensate.

2. Every once in a while, the set will go blank and not respond to any remote inputs to turn the set on/off or anything else. The set receives the IR commands fine as indicated by the light is the front but nothing will happen. All 3 lights are off otherwise.

Thank you!

My HLN467W was making a whirring noise and the colors had turned greenish. The noise would go away as soon as I turned the set off.

So, I replaced the color wheel that seemed fully intact and that fixed the greenish color problem, but two new problems developed:

1. The image shifted down by half an inch and the service menu adjustment is not enough to compensate.

2. Every once in a while, the set will go blank and not respond to any remote inputs to turn the set on/off or anything else. The set receives the IR commands fine as indicated by the light in the front, but nothing will happen. All 3 front lights are off otherwise.

Thank you!