I have 3 circuits in my theater and would like seperate control of them for lighting. Do the Lutron Dimmers all operate on the same frequency so that they will all work with the same remote or can I set them up seperate?

kirby

The Lutron Maestro dimmers all work off the same IR commands. So if you hit off, on, dim, or bright all 3 switches will respond. However you can set a scene for each one and then send out the scene command and all 3 will go to the preset light level (you couls set the scene for one set of lights to be off, one set to be on, and one set to be dimmed, etc).

If you need full control over each switch seperately I believe you have to step up to the more expensive Spacer system.

The Lutron Spacer system will allow Scene Control
http://www.lutron.com/CMS400/default.aspx?app=spacersystem