phpgnome
02-25-09, 02:07 PM
Has anyone successfully controlled the new Kurio displays via 232? I'm using a URC MSC-400 and have tried /x02**PON/x03 for On and /x02**POF/x03 for the Off commands and neither works.
|
View Full Version : Pioneer PRO-141FD RS-232 control phpgnome 02-25-09, 02:07 PM Has anyone successfully controlled the new Kurio displays via 232? I'm using a URC MSC-400 and have tried /x02**PON/x03 for On and /x02**POF/x03 for the Off commands and neither works. blakrj 03-04-09, 03:45 AM try entering the commands a \x02**PON\x03 instead of "/". Fixed problem with my Yamaha commands Fiasco 10-20-09, 09:43 AM Where is the RS-232 command protocol for these tv's published? wolfsnake 10-22-09, 09:31 PM You can usually get it from Pioneer's website in the support->custom installers area. blakrj is correct - but i always seem to forget on EVERY job. It's gotta be some kind of mental block...:rolleyes::rolleyes: ccotenj 10-23-09, 05:59 PM Has anyone successfully controlled the new Kurio displays via 232? I'm using a URC MSC-400 and have tried /x02**PON/x03 for On and /x02**POF/x03 for the Off commands and neither works. something to keep in mind... the rs-232 cable that you use with the msc-400 is a crossover cable, and the kuro requires a straight cable (at least my 150fd does)... for fiasco... linkage for 141fd (http://www.pioneerelectronics.com/StaticFiles/PUSA/Files/Elite%20Monitor%20PRO-101_141FD%20Basic%20RS232C%20&%20IP%20Commands%20List.pdf)... linkage for all pio displays (http://www.pioneerelectronics.com/PUSA/Home+Entertainment+Custom+Install/RS-232+Codes/ch.Plasma+Displays.Default) wolfsnake 10-24-09, 11:45 AM something to keep in mind... the rs-232 cable that you use with the msc-400 is a crossover cable, and the kuro requires a straight cable (at least my 150fd does)... Good call!:D |