Ringfinger
03-13-09, 09:12 AM
I tried to set it ip wirelessly and here is what happened:
Nope, not working. I configured it by plugging into my router, set the security and the IP address. Then unplugged and plugged into my DTV box.
I connected it to the DVR box, nothing happened. So, I went to the menu/network settings. The default settings they have in are not good. So, I went to advanced, and entered my own, but I can't connect. Actually, I don't know what to enter. My wireless can see the client, I looked, but it has no IP address showing. It shows that it is authorized.
When I do IP config on my computer I get:
default 192.168.11.1
Subnet Mask 255.255.255.0
Ip address 192.168.11.2 (I know that is just my pc, right?)
When I go into the router, I have this: This is for the WAN information
IP Address 192.168.1.47
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1 (Via DHCP)
DNS1(Primary) 192.168.1.1 (Via DHCP)
DNS2(Secondary) 192.168.1.1 (Via DHCP)
DHCP Server Address 192.168.1.1
For the LAN information, I get:
IP Address 192.168.11.1
Subnet Mask 255.255.255.0
What is what with IP Addresses?
I know I am entering the wrong info, so what do I enter?
What is what here? I don't know what I should be entering for the fields in the DTV box. Help?
The actual Wireless Access Point says:
IP Address: 192.168.11.4
Subnet Mask: 255.255.255.0
Gateway: 192.168.11.1
So, what am I to enter?
I thought that I should just be able to plug it in after I configured. When I do, and I go to On Demand, nothing, it is like there is nothing plugged in. So when I go to menu/settings/network, and try to connect, it wont and it has an IP address of like 163.xxx.xx.x and a subnet of 255.255.0.0 That makes no sense to me. When I put in my settings (actually, not sure what to enter and that is why I need the help) it won't connect.
I know that when I look at my router, I can see a wireless client, it is autorized, but shows no IP address. That tells me that I have it configured with the right encryption and password, but it will not connect? I have WEP 128, which is 13 alpanumeric. When I set up, I did not see that option, somehow the tech talked me through it. Should I change the IP address of it? Please help as I want to get this thing running this weekend.
Nope, not working. I configured it by plugging into my router, set the security and the IP address. Then unplugged and plugged into my DTV box.
I connected it to the DVR box, nothing happened. So, I went to the menu/network settings. The default settings they have in are not good. So, I went to advanced, and entered my own, but I can't connect. Actually, I don't know what to enter. My wireless can see the client, I looked, but it has no IP address showing. It shows that it is authorized.
When I do IP config on my computer I get:
default 192.168.11.1
Subnet Mask 255.255.255.0
Ip address 192.168.11.2 (I know that is just my pc, right?)
When I go into the router, I have this: This is for the WAN information
IP Address 192.168.1.47
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1 (Via DHCP)
DNS1(Primary) 192.168.1.1 (Via DHCP)
DNS2(Secondary) 192.168.1.1 (Via DHCP)
DHCP Server Address 192.168.1.1
For the LAN information, I get:
IP Address 192.168.11.1
Subnet Mask 255.255.255.0
What is what with IP Addresses?
I know I am entering the wrong info, so what do I enter?
What is what here? I don't know what I should be entering for the fields in the DTV box. Help?
The actual Wireless Access Point says:
IP Address: 192.168.11.4
Subnet Mask: 255.255.255.0
Gateway: 192.168.11.1
So, what am I to enter?
I thought that I should just be able to plug it in after I configured. When I do, and I go to On Demand, nothing, it is like there is nothing plugged in. So when I go to menu/settings/network, and try to connect, it wont and it has an IP address of like 163.xxx.xx.x and a subnet of 255.255.0.0 That makes no sense to me. When I put in my settings (actually, not sure what to enter and that is why I need the help) it won't connect.
I know that when I look at my router, I can see a wireless client, it is autorized, but shows no IP address. That tells me that I have it configured with the right encryption and password, but it will not connect? I have WEP 128, which is 13 alpanumeric. When I set up, I did not see that option, somehow the tech talked me through it. Should I change the IP address of it? Please help as I want to get this thing running this weekend.