hi
reconnected my ISCAN HD+ after months of unplugged.
can't output anything on plasma or projector. dvi, vga. nothing
anyone has an idea ?
the machine is from 2004 and in mint condition. no power surge or anything
remote, OSD on the scaler function all perfectly.
but not image (menu, source) whatsoever.

thanks

hi
reconnected my ISCAN HD+ after months of unplugged.
can't output anything on plasma or projector. dvi, vga. nothing
anyone has an idea ?
the machine is from 2004 and in mint condition. no power surge or anything
remote, OSD on the scaler function all perfectly.
but not image (menu, source) whatsoever.

thanks

Hello ,
Well ,it's a little old and a little hard to find anymore , but there is an entire HD+ thread here...
http://www.avsforum.com/avs-vb/showthread.php?t=444830&pp=30
Be sure to bookmark it for future use .

On to your current dilema...do you have the original Quick Start sheet for the HD+ ? Basically , after connecting your Display , power up the HD+ , press the "Output Setup" button once , you should see "A/D" on the FPD ; press the "Down Arrow" once to get "DVIV" on the FPD . Press "Enter/Exit" button .You should now have the HD+ Menu on-screen on your Display .Cycle through each of the Menu Items to fine tune the Input and Outputs .

If you're still having problems try responding here or in the other Thread with more info such as Sources , Cables , Display resolution , etc. as this will help in assisting you .

Good Luck ,

Scott...............