Hello all,
I recently picked up a intel mac mini and can't seem to get it working on my westy. I've searched every thread with "mac mini" and "LVM-37w3se" on the entire internet and tried every possible configuration on switchresx. So here I am begging anyone who has gotten this to work to post their switchresx settings.

Right now, I'm
Pixel clock----138.65 Interlaced-----Off


Label----------Horizontal-------Verticle
Active---------1920-------------1080
Front Porch---48----------------3
Sync Width---32----------------5
Back Porch---80----------------23
Blanking------160---------------31
Total----------2080--------------1111
Scanrate------66.66-------------60
Pos sync on for both
use simplified setting off


Thanks,

Gimi

Those settings look good. What exactly is or isn't happening when using them?

Those settings look good. What exactly is or isn't happening when using them?

No input, blank screen.

Does the Westy have a DVI input or an HDMI input? If the latter, does it have to be configured with HDCP off in order to work with a computer?

It is a shame. I used to have the G4 mini hooked up to the first version 1080p Westy. It was plug and play.

The 37se potentially has a problem with a buggered EDID. You can search through the Westy 37w3 thread (http://www.avsforum.com/avs-vb/search.php?searchid=12806956) here at AVS and see references to it. There is a thread on HardForum (http://www.hardforum.com/showthread.php?t=1232024) that goes into the problem in detail, and how to reprogram the EDID on the display. Not a pretty solution. Good luck.