i have problem with connecting my WD to home network,

in wdtv i have fw 1.02.07_B-RAD.CC_WDLXTV-0.5.3.2
to wdtv USB1 is connected pen with :
core-extras.app.bin
samba.app.bin-0.2
webserver.0.6.140.app

to USB2 is connected my lan@usb vivanco which after 2-3 minutes recieve ip from router (i see WDTV_IP in dhcp table on router an the same ip see on tv in ABOUT section) so this lan card should be usb2.0 i think and works

but : i cannot ping this ip from any pc from my network (xp or vista), i cannot telnet it or access by html (webserver), wd not mounts any directory from net.mounts

btw this is my lan@usb device
http://www.allegro.pl/item640488235_karta_sieciowa_usb_rj45_laptopa_notebooka_pc_v ista.html

they say that it is usb 2.0 and chipset is DAVIKOM whatever it means :)
please help

ok i have some more info whats happening, here are the logs, i dont understand it, but i saw that my LAN@USB was recognized as ASIX and it was configured with ip 192.168.1.2

http://miike.webpark.pl/dmesg.txt.2
http://miike.webpark.pl/messages.txt.1
http://miike.webpark.pl/messages.txt.2
http://miike.webpark.pl/system.txt.2

please help me some1

is your pc a similar ip, i.e 192.168.1.XXX where xxx is a number between 1 and 255.

yep, my network is setuped in range 1.xxx, for example my main dsl/wifi/router is 192.168.1.1 and wdtv is connected to it (also xbox XBMC) then i have switch and 4 pc connected to it, (vista,xp) and i have two laptops which are connecting by wifi to dsl router

all of this machines has ip from range 1.1 to 1.255

is there any1 who can help me ? ?

is there any1 who can help me ? ?
It looks like the ethernet driver doesn't like your USB to ethernet adapter. Unless you like to play around I'd stick with one that is known to work (http://wiki.wdtv.org/doku.php?id=supported_usb_devices). You could go to wdtvforum.com (http://wdtvforum.com) and ask around there.