looking for an inexpensive ceiling mount with 6" or so of drop for my EIKI 1500t which uses a 4x m4 not square mount pattern that is offset to the lens side of the projector. I looked at the monoprice mount but would prefer 4 bolt as thats what this projector is designed for. any feedback on either of these 2 mounts:
http://cgi.ebay.com/Projector-Ceiling-Wall-Mount-Bracket-For-Sharp-Epson_W0QQitemZ220469294203QQcmdZViewItemQQptZLH_DefaultDoma in_0?hash=item3354fe747b&_trksid=p3286.c0.m14
http://cgi.ebay.com/UNIVERSAL-CEILING-MOUNT-DLP-LCD-PROJECTOR_W0QQitemZ160326836175QQcmdZViewItemQQptZLH_Default Domain_0?hash=item2554395fcf&_trksid=p3286.c0.m14

I am using this Monoprice mount for about 5" of drop: http://www.monoprice.com/products/product.asp?c_id=108&cp_id=10828&cs_id=1082803&p_id=3010&seq=1&format=2

It is very similar to the ones you linked when you remove the extension pole (as shown on left):

http://images.monoprice.com/productlargeimages/30102.jpg

PS - They also have it in black (noticed that you had linked only black mounts): http://www.monoprice.com/products/product.asp?c_id=108&cp_id=10828&cs_id=1082803&p_id=5466&seq=1&format=2

http://images.monoprice.com/productlargeimages/54662.jpg

PS - They also have it in black (noticed that you had linked only black mounts): http://www.monoprice.com/products/product.asp?c_id=108&cp_id=10828&cs_id=1082803&p_id=5466&seq=1&format=2

http://images.monoprice.com/productlargeimages/54662.jpg


Bought this same one from Ebay in 05 used it for Benq PE7700 and now with Mit. HC4900. It works very well didn't have any problems configurating mounting holes. But be carefull not over tigthen screws (ones in pole itself) they will strip.

mark