|
View Full Version : Mounting Buttkicker LFE in older Berkline 090 seplant 10-18-09, 01:24 PM I recently bought a pair of Berkline 090s with factory-installed Buttkickers, and I really like them. I have a set of older Berkline 090s (purchased in 2003), and would like to install Buttkickers in them as well, but the conversion kit sold by Buttkicker apparently won't work for older Berklines. Can anyone provide any advice on how to do this? Thanks. rsh 10-19-09, 12:39 AM Just look at the plywood plate on the chairs you bought that have the buttkickers and make a similar one... seplant 10-19-09, 06:13 AM Just look at the plywood plate on the chairs you bought that have the buttkickers and make a similar one... Problem is the cross bars on the old chairs are different than on the new ones. There is much less room under the old ones. rsh 10-19-09, 08:13 AM seplant, What is your email? I can send you a couple of pictures showing the old chair with mounted BK, so you can see how it was done before... seplant 10-19-09, 07:43 PM seplant, What is your email? I can send you a couple of pictures showing the old chair with mounted BK, so you can see how it was done before... My email is seplant@verizon.net. Thanks! rsh 10-20-09, 09:56 PM Pictures sent... |