hi all, does anyone who has coaster showtime seats remember the assembly instructions..... left to right, slide up push down, etc?

Do you mean the seat backs or attaching the seats together at the bottom where the pegs are located?

how the seats attach together. mine are about 5 years old and i dont remember exactly how they attached. i seem to remember that one chair had 2 arms and the other 2 had 1 arm. i dont want to break anything as they have served me well other that the plastic pull releases break every couple of years. thx

Yes, it's been a little while since I've done this and we no longer have the Showtimes on our floor, but here goes. The seat on the left (when looking from the front of the room) should have two arms. Start with that seat and attach the next seat that has the single wedge arm on the right. I believe the two arm recliner will have a rail at the bottom and the single arm chair pegs on the left side. The pegs go up and over the rail, and seat into it. Then you so the same thing for the seat on the far right- connect it to the middle seat the same way.

If you are trying to take them apart, start with the seat on the far right and lift and pull forward a little to release the pegs that are seated into the rails of the middle seat. They should come apart fairly easily, so don't force anything.

I hope that all makes sense.

thanks for the info worked great, ben