TV Stand Thread [Text View] - Page 3

Geckotek

02-13-05, 09:05 PM

Well, I finally made it down to Houston again to pick up my stand. I originally wanted the Oppli, but when I saw it I decided it was too short and just didn't excite me. So I decided on the Bonde sideboard (I think realizing the store was $100 cheaper than the website made a big difference in my mind.) At the time they were out of stock, so I had to wait.....so my TV's been on my coffee table for months now.

But no more!!! Here is my TV on the Bonde sideboard minus the legs. The PC will eventually be moved into an HTPC case and placed inside the sideboard.

http://www.geckotek.net/images/tvonstand.jpg

Hard to tell from the pic, but the inside of the sideboard is lit with a light in the top of each section. Looks sweet!

Buck's SCSW

02-13-05, 10:01 PM

Geckotek, your setup looks absolutely amazing. The asparagus on top of the TV ties the entire thing together. :D

J/K man, it does look really smooth though.

Geckotek

02-13-05, 10:03 PM

Originally posted by Buck's SCSW
Geckotek, your setup looks absolutely amazing. The asparagus on top of the TV ties the entire thing together. :D

J/K man, it does look really smooth though.

LOL, thanks. I'm hoping the "asparagus" will sprout some more leaves and look a bit nicer. I tried to throw them in kinda randomly, but that looks like crap. Will have to take them back out and bind/line them all up together.

Fedreams

02-13-05, 11:36 PM

Originally posted by Geckotek
LOL, thanks. I'm hoping the "asparagus" will sprout some more leaves and look a bit nicer. I tried to throw them in kinda randomly, but that looks like crap. Will have to take them back out and bind/line them all up together.

If you microwave the asparagus for a few minutes until they are tender you can eat them with alittle mayo or butter (margarine or Miracle whip if you are calorie conscious).

I personally like the use of the two different stereo "crystals",1) which the asparagus is sitting in as well as 2) the spheres to absorb the extra RF and EMI to capture the best possible picture on your set.:)

I will have to purchase some once my set up is complete. Thanks for the idea!:D

Geckotek

02-14-05, 12:09 AM

Well, the spheres were sitting up where the bamboo is. I decided I wanted something taller and thought the green bamboo would bring out the green in the Rothko paintings. I just set the spheres down to the side at the time. Don't think I'll leave them that way.

Hmmm....with all this poking at me, guess you guys don't like my style? **sniff**sniff**

Buck's SCSW

02-14-05, 01:43 AM

Originally posted by Geckotek
Hmmm....with all this poking at me, guess you guys don't like my style? **sniff**sniff** Dude, you have asparagus sitting on top of your TV. What did you expect us to say? :D

We know your style. We can see it. I would say your set-up is probably the second nicest I have seen posted on the site. It would be number one except some dude built a home theater room and that was sweet, but other than that I'm digging your style. Minus the vegetables.

EDIT: Just saw you're from Dallas. Off topic, but thanks for Steve Nash. :D

Normtp1

02-14-05, 10:43 AM

Geckotek: Nice looking setup! I have a couple questions. 1) what is the width of the shelves for this unit, will they accept normal Audio components? 2) Did you get the shelf that your CC is on from Ikea as well? If so, which one is it? Finally, 3) How close to flush is your CC with the front of the TV? Again, your setup looks great!

grandprixse94

02-14-05, 11:53 AM

Has anyone built a corner shelf for a RP? Here is a pic that IronHorse posted. Would it hold the weight of a RP?

Buck's SCSW

02-14-05, 12:01 PM

I'm no engineer, but that looks like a very very bad idea without any support in the front.

Fedreams

02-14-05, 04:53 PM

Originally posted by Geckotek
Hmmm....with all this poking at me, guess you guys don't like my style? **sniff**sniff**

I like your style that's why I commented. Simple and straightforward. You did good! On your computer, did you put it together yourself or purchase it? And what does it consist of?

Geckotek

02-14-05, 11:39 PM

Originally posted by Normtp1
Geckotek: Nice looking setup! I have a couple questions. 1) what is the width of the shelves for this unit, will they accept normal Audio components? 2) Did you get the shelf that your CC is on from Ikea as well? If so, which one is it? Finally, 3) How close to flush is your CC with the front of the TV? Again, your setup looks great!

The shelves are 15" D x 18" W - I guess it depends on the component depth, but they should be wide enough.

Yes, the shelf is from IKEA, it is the Lack Wall Shelf (http://www.ikea.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10101&storeId=12&productId=11326&langId=-1&parentCats=10104*10172) and what I love about it is the hardware is totally hidden.
The shelf is 10 1/4" deep and the set is almost 16" from the wall to the face. It comes out to the speaker being about 5 1/2" from the face of the TV....but it doesn't bother me at all.

Geckotek

02-14-05, 11:57 PM

Originally posted by Fedreams
I like your style that's why I commented. Simple and straightforward. You did good! On your computer, did you put it together yourself or purchase it? And what does it consist of?

Thanks, I really was kidding. I'd like it even if everyone else laughed at me. (You're not laughing....right?) Hehe.

Yes, I put it together myself. Unfortunately, I did it when I was more concerned about making it gawdy and flashy. I never thought I'd put it next to the TV. Anyway, here's the breakdown (I've ignored it recently, so some of this isn't so new.)

P4 3.2 GHz HT (it was free...otherwise it'd be AMD)
Gigabyte 8IPE1000 Pro-G (just a decent cheap board to go w/ my free proc)
2 X 512MB Corsair PC3200 running dual channel
ATI 9800 Pro
2 X 120 GB Maxtor SATA HD (Have another sitting waiting to install...but may sell them all for something larger since this is now my HTPC)
Liteon 16X DVD
Sony DRU-500A DVD-RW
Thermaltake Purepower 420Watt PSU
Thermaltake XaserII case (gotta get rid of this ugly thing)
Some gawdy blue cold cathodes, lighted fans, etc....

Like I said, it's a bit older now and I'll probably change and least some of the components when I move to an HTPC case. Although I'm not as into that stuff like I was over a year ago, so I may just be content with what I have on some of it (don't feel like shelling out tons of money for a new vid card when the 9800 Pro is playing HL2 pretty darned well.)

Fedreams

02-15-05, 12:19 AM

Geckotec,

Thanks for the information. I was thinking of getting a HTPC for my office system but I like my components so I may just hook up a computer thru the DVI port. By the way who is Billy Sunday?

Geckotek

02-15-05, 01:24 AM

Originally posted by Fedreams
Geckotek,

Thanks for the information. I was thinking of getting a HTPC for my office system but I like my components so I may just hook up a computer thru the DVI port. By the way who is Billy Sunday?

Yeah, mine is currently just that....my PC via DVI. I'll try to make it more of an HTPC when I rebuild. But honestly the only real difference will be software and maybe an HD Tuner card so I can watch my favorite programs whenever.

Billy Sunday (http://billysunday.org/) was a well known baseball player turned Evangelist. I honestly don't know much about him except that he turned down several high paying offers to continue playing and instead chose to be a Pastor.

I just like the quote. It seems so many ppl think going to church makes you a Christian, when in truth many churches have more non-Christians attending than ppl truly living a Christian life. Then of course something bad happens in the church or someone hurts someone somehow and ppl leave the church thinking "If these ppl are what Christianity is about...." Anyway, we all fall short....Christian or not. For me the quote means we Christians should hold ourselves to a much higher standard than just going to Church on Sundays.

Another one I like is "America, Bless God!"

Ok, off my soap box.

Lando33

02-15-05, 01:23 PM

I am looking for a stand for my new RCA 50" DLP HD50LP162. Seems simple enough but the kicker is my imensely oversized Infinity IL 36C center channel speaker. I would ideally like to have room to put this on a shelf below the TV. It's measurements are 23”W x 12.5”D x 9”H, weighing in at an even 32 lbs.

Help please?

Geckotek

02-15-05, 03:08 PM

I know several ppl in this thread have struggled with that. I recall seeing some solutions so if you have the time and patience to read through this thread, you might find an answer to your question.

lnin0

02-16-05, 01:02 PM

I got the 42" Sony Grand Wega LCD RPTV and just ordered this - http://www.bushfurniture.com/bushindustries/finals/VS39736.jpg

Without the swival top it is about 19" high and 48" across so it should be nice for 40-44" widescreens. Comes in a wood color as well. Best Buy and Sears carry it for around $150.

subwoofer

02-16-05, 04:11 PM

Originally posted by grandprixse94
Has anyone built a corner shelf for a RP? Here is a pic that IronHorse posted. Would it hold the weight of a RP?

This is the problem I run into at my place is having to place the TV in the corner of the room. A setup like this would be great and even have a few shelfs below for support and components. Any try this?

RowdyUSP40

02-16-05, 04:20 PM

Well, just like most of you I've been looking for a A/V stand and speaker stands etc. for months. Today I finally pulled the trigger! I purchased a TV stand, pair of speaker stands and a wall shelf for that hard to place center channel from www.jonalexander.com (http://www.jonalexander.com) (Progressive Structures) I believe this is very good quality a/v furniture at a very good price. I order over the phone with Paul (very nice and easy to work with). I will post some pics and a review of the furniture when I get it all set up.

What I purchased....

Tier Latitude T-5023 TV Stand
50"w x 23"h x 21"d (In Black)

Media Designs R-30 Speaker Stands
30" tall with 8" x 8" top and 12" x 12" base. (In Black) Asked for the larger top and base. (no extra charge!)

Media Designs WM-2519 Wall Mount Shelf (Which will mount over my TV) (In Black)
Asked for a 24"w x 19"d square glass instead of the round semi- circle for my center channel. (no extra charge!)

All made from 3 1/2" round thick 14 gauge steel and 3/8" thick glass, these designs allow for expansion and customization. Weight capacity is rated at 200lbs per lower shelf and up to a 65" TV per top shelf. All conceal wiring in rear section of stand.

Have a look at the site.... you may find something you like.

RowdyUSP40

02-16-05, 04:28 PM

Originally posted by subwoofer
This is the problem I run into at my place is having to place the TV in the corner of the room. A setup like this would be great and even have a few shelfs below for support and components. Any try this?

The site I just posted as a good corner shelf.

R-4228 TV Stand
42"w x 28"h x 25"d
Accommodates up to a 42" wide 350 lbs. T.V. on top and 3+ components up to 26" wide x 21" deep and 110 lbs. per lower shelf. Four clear 3/4 round semi-circle tempered glass shelves are spaced 8" apart

subwoofer

02-16-05, 04:37 PM

^meh.....its alright. Way to high for my taste and I want a 46" or 50+ inch DLP tv, so I'm gonna need something wider. Plus, I'm trying to stay under 20" deep.

Of course, if you look at my profile and my threads, I am having trouble with spacing. I think I'm stuck with my perfect 32" tube tv. All well, dvds still look great

videoaddikt

02-27-05, 03:50 PM

For those with up to 50" sets you might check out Wal-Mart... I saw Titan TV stands, that looks almost like Tech-Craft for $80!
They are mfg. by Z-Line Designs who makes stands in the $150-400 range.
200 lbs top shelf capacity.

I would have grabbed one if I it worked for a 55". I don't know if all WalMarts have these. They had one that was an open box for $65!

subwoofer

02-27-05, 03:53 PM

got a link?

Geckotek

02-27-05, 04:13 PM

Originally posted by subwoofer
got a link?
Doesn't appear to be available online.

Man, I'm all excited and happy w/ my new stand and setup in general, then the unexpected happens. Now all of a sudden I'm buying into a 3 bedroom townhouse that has all dark wood floors and cabinetry. And all my furniture is BIRCH!!!! Oh well, back to IKEA.....

videoaddikt

02-27-05, 04:25 PM

Originally posted by subwoofer
got a link?

Sorry, saw it this morning in the store, not online. In the furniture dept.

videoaddikt

02-27-05, 06:15 PM

Another I'm considering....

http://www.circuitcity.com/ssm/Nea-Moda-Wide-TV-Stand-220337-/sem/rpsm/oid/110765/rpem/ccd/productDetail.do

DaveWolf

02-28-05, 11:11 AM

Does anyone know if you can get the Ikea OPPLI stand for $99 in black? I can only find it in light birch on their website. I think this would work perfect for me at the right height and casters, but definitely need it in black.

Can you get it in different colors from the actual store? I am in North Carolina, so there is basically no close store around. Thanks.

allenn

02-28-05, 12:57 PM

I got a Z-Line Designs TV Stand (23541S) from Circuit City for my Samsung DLP HLN5065W. It is a great fit for the 50" DLP. Colors match perfectly.

You may view it here:
Z-Line Designs TV Stand (23541S) (http://www.circuitcity.com/ssm/Z-Line-Designs-TV-Stand-23541S-/sem/rpsm/oid/69535/rpem/ccd/productDetail.do)

Ed Weinman

02-28-05, 01:49 PM

We've just received the Plummers 2005 Office Catalog which shows a very, very attractive "Classic TV Unit" ($1,165.00): 105"wx24"dx19"h. The problem is, though, that the Plummers web site does not show this as part of their inventory. It's available in cherry and, what they call, venge (which may be a form of black). (Actually, the catalog was part of the L.A. Times Sunday edition.)

millerwill

02-28-05, 04:19 PM

Originally posted by DaveWolf
Does anyone know if you can get the Ikea OPPLI stand for $99 in black? I can only find it in light birch on their website. I think this would work perfect for me at the right height and casters, but definitely need it in black.

Can you get it in different colors from the actual store? I am in North Carolina, so there is basically no close store around. Thanks.

The Oppli is a great stand for a 61" dlp, etc., but the black version has unfortunately been discontinued for 6 months or more.

aafflyer

02-28-05, 08:16 PM

Originally posted by Ed Weinman
It's available in cherry and, what they call, venge (which may be a form of black).
I've seen countless products in venge in the past week in my search for a stand for a Hitachi 60VS810. Venge is indeed a shade of color that is "black" in my view. In fact, I have been in Plummers this past week they stated that items in venge are hard to keep in stock...

Charlie

Geckotek

02-28-05, 11:51 PM

Originally posted by Ed Weinman
<snip>It's available in cherry and, what they call, venge (which may be a form of black).<snip>

Venge or "Wenge (http://www.wflooring.com/Technical_Info/Species_Tech_Info/Species_Pages/wenge.htm)" is actually a dark brown. FYI - pronounced 'When-gay'

allmansd

03-01-05, 12:50 AM

Gecko-
Thanks for posting that stand pic. After reading everyone's hunt as detailed in this thread for a good fit for a stand, I had to go with the Bonde. The only difference is that I went with the 74 inch Lack wall shelf.

Copied you right down to the lights, tho I have them plugged into a wall switch controlled outlet, which makes it easier to deal with 'em.

Thanks to everyone for the advice. I'll try posting a pic here, hopefully it will work.

As you can see by the open, unwired outlets, this is a room in progress...But as soon as the floor went down, I had to get something I could watch while finishing up. You know how it is.

Geckotek

03-01-05, 06:38 AM

Niiiiiice. Wish I had gone w/ the longer shelf now. I really fits the sideboard well. BTW, I also have my lights connected to a switched wall outlet. They serve as part of my main room lighting along w/ a floor lamp and can light shining over the mantle (still can't believe these apts w/ no overhead lighting.)

Looking like I may go back for the dark brown versions of the same items. I'll be looking to sell the birch versions. Anybody in Dallas area interested?

Bobmac

03-02-05, 06:35 PM

Wow. Just read this entire thread (took me 2 days) and got some incredible ideas. I saw several people say that they liked the Salamander Triple 20 but didn't like either the size or the price. I'm in the same camp so I'm going to try to build my own with a similar design.

It looks like the Salamander stuff is nothing more than some T-slot extruded aluminum framing with T-slot hardware and wood shelves. Should be pretty easy to cut cabinet grade plywood to the specific size I want, attached some edge banding, and paint to match the other furniture in my room. The shelves attach to the framing with the T-slot hardware so no wood joints are needed. That's perfect for my woodworking skill level. I'll adjust the space in the center section to fit my CC, and adjust the height to fit my yet to be purchased HL-P5674W.

I've been told by someone at work that I can get T-slot framing cut to the size I need from 80/20 Inc. Their website name is 8020, preceeded by the typical 3 w's and followed by .net (I don't have 5 posts yet!). Looking through their catalog, they have lots of options for panels, hinges, drawers, etc. They also have a frame profile that has slots on 2 sides, and a rounded edge on the other 2 sides. Might make nice corner posts. I'll have to get a little creative.

I've been warned that this stuff isn't exactly cheap, so I might not end up saving much. Should be worth it though to have a custom size and style to match the room. I'll post when I get prices for the framing and hardware.

Bob

Fedreams

03-02-05, 07:52 PM

You might want to check out www.item.com for their prices also.

MarkyMark

03-03-05, 04:37 PM

Last link didn't work, maybe you could try this one:

http://www.itemamerica.com./

Ryan Rhino

03-03-05, 04:47 PM

http://www.ikea.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10101&storeId=12&productId=51511&langId=-1&parentCats=10104*10174

http://www.ikea.com/PIAimages/42506_PE137362_S3.jpg

Available side bookshelves. I have a 52 JVC on it and am very happy with it. Solid wood, very sturdy. It's on hard wood with felt sliders so I don't have a hard time moving it for cable adjustments etc.

Fedreams

03-03-05, 05:59 PM

Originally posted by MarkyMark
Last link didn't work, maybe you could try this one:

http://www.itemamerica.com./

Thanks for the correction. My mistake!

Splort

03-07-05, 09:14 AM

I wanted to thank everyone who posted on this thread for making my search for the ideal TV stand for my WD-62725 much less painful. When I get enough posts under my belt I will submit pictures of my setup.

One lesson learned though, cover up all exposed skin when working around attic insulation. Running wires sucks!

Splort

Fedreams

03-07-05, 11:35 AM

Here is a link to some nice looking corner stands

http://www.hometheaterforeveryone.com/pages/7/index.htm

Splort or any one interested.
After working around fiberglass products. Wrap some masking tape around your hand with the sticky side out. Use this as you would a lint brush to pick up the stray fiberglass "splinters" in or on the skin. It may be painful for those with hair on the exposed areas This technique was taught to me by a surfboard manufacturer. Or you can go surfing instead!

Splort

03-07-05, 03:28 PM

Yes it is painful.

everest

03-07-05, 04:31 PM

Originally posted by Ryan Rhino

[QUOTE]
Available side bookshelves. I have a 52 JVC on it and am very happy with it. Solid wood, very sturdy. It's on hard wood with felt sliders so I don't have a hard time moving it for cable adjustments etc.

Hi, Ryan, isn't this IKEA one a little too high for viewing? what color is that? it looks pretty nice.

sstinman

03-08-05, 11:02 AM

Has anybody found this type of TV stand for around $400 (or less)??

Credenza - in a dark wood stain and glass doors (http://www.hometheaterforeveryone.com/pages/17/index.htm)

thanks!

nozlep

03-09-05, 02:58 PM

I wanted a layout like this:

http://www.racksandstands.com/prods/StudioTech/PS880/TV-Stands-and-Audio-Towers/0C2/0PSO0060.htm

Only problem is I could not find a tv stand wide enough for the tv I want (HLP5674). Most manufacturers either didn't have matching audio racks or didn't indicate that there were any. The sets I did find were too expensive or I wasn't sold on the look. I did find a set similar to the Samsung stands but shipping took the price out if my budget. Finally I went to the studiotech home page and BAM they sell the larger stand for $399 plus free shipping.

http://www.studiotech.com/jsp/productSelection.jsp?type=racks

I plan to get the PS-33 and two PS-6 at a later time.

sstinman

03-14-05, 12:13 AM

I ended up getting the Tech Craft 58" stand (THC/PTV 583) from Circuit City for $240 with free shipping (on sale). The stand is usually $300.

http://www.circuitcity.com/IMAGE/product/enlarged/thc/EC.THC.PTV582.CN.JPG

Link to CC (http://www.circuitcity.com/ssm/Tech-Craft-DLP-and-Flat-Panel-TV-Stand-PTV583-/sem/rpsm/oid/114635/rpem/ccd/productDetail.do) - Dimensions: 20" x 58" x 20" - Weight Capacity 250 lbs.

merlintl

03-14-05, 01:04 AM

Originally posted by sstinman
Has anybody found this type of TV stand for around $400 (or less)??

Credenza - in a dark wood stain and glass doors (http://www.hometheaterforeveryone.com/pages/17/index.htm)

thanks!

sstinman,

I got lucky and picked up an inexpensive but very nice stand for a little over $200. Its pretty similiar to what you are looking for.

http://www.sauder.com/furniture/product.asp?p=604

I didn't install the legs so the height is about 20". Also, the middle bottom drawer is an optional install if you want to use it for a component instead.

Fedreams

03-14-05, 01:14 AM

sstinman

03-14-05, 09:28 AM

Thanks, Fedreams and Merlintl.

But Cherry is not dark enough I'm looking for more of any ebony or dark walnut finish with a modern look to it. I don't think I'll find what I'm looking for at the price I'm willing to pay. So the Tech Craft will do for now. Maybe I'll get lucky and find a something later. If I do find a better stand then I can sell the Tech Craft and get at least 50-70% of my money back.

HazChem

03-20-05, 12:34 PM

I wanted to thank all the people who contributed to this thread. It was invaluable in helping me decide between a stand or a built-in wall unit.

I finally decided on the Bello 2601 which fits my new set just fine. It is very simple and classy looking. I really liked some of the Ikea stands but they weren't wide enough for what we wanted.

videoaddikt

03-20-05, 12:58 PM

Originally posted by sstinman
I ended up getting the Tech Craft 58" stand (THC/PTV 583) from Circuit City for $240 with free shipping (on sale). The stand is usually $300.
Link to CC (http://www.circuitcity.com/ssm/Tech-Craft-DLP-and-Flat-Panel-TV-Stand-PTV583-/sem/rpsm/oid/114635/rpem/ccd/productDetail.do) - Dimensions: 20" x 58" x 20" - Weight Capacity 250 lbs.

This one is also available at CC for $250. 250 lbs., real wood, metal and glass. Gets down to personal taste I suppose.
19X58X18

http://www.circuitcity.com/ssm/Nea-Moda-Wide-TV-Stand-220337-/sem/rpsm/context/99624120/oid/110765/rpem/ccd/productDetail.do

shanec

04-20-05, 08:12 PM

Originally posted by mnb
This was a post I had on another thread about stands:

I had the same problem last year when I bought my 60" GWII.

I didn't like any of the stands I could find and I really wanted to be able to hold more components under the TV, along with my center speaker. I also wanted it to be around 15" high so that when I'm on my couch, I'm at a good viewing angle. I really didn't want to settle for just the speaker under the TV and having to buy an ugly tower rack for my components.

I ended up building my own stand with wire racks. It started out being a temporary solution, but once I had it built, it seemed to work so well, that I have not yet replaced it.

It was extremely easy and cheap. I bought two 24X60" inch black wire shelves and four black posts. I simply figured out how high I wanted/needed and cut the posts to size.

I also ended up buying a couple pieces of 1/4 inch birch plywood and stained it with a walnut color for shelve tops.

I bought the shelves (part no. 205-BS2460) and posts (part no. 205-BP36) from www.buyrack.com. I happen to live in Chicago and they have a location nearby, so I simply went and picked them up. I believe they also deliver though. Total cost less than $100.

It's big enough to hold a receiver, dvd player, hd dtv box, vcr, cd changer and my center speaker.

Here is a pic:

THANK YOU, THANK YOU, THANK YOU for posting this !!!!!

This is exactly what I need. I need a simple table/shelf that's all about function and not so much about form (or expense). PERFECT!

And it appears www.buyrack.com is still online and still carrying those parts.

subwoofer

04-28-05, 03:46 PM

This summer (I hope) I plan on getting a nice Samsung DLP TV that is either 46 or 50". I have small Polk speakers that are only 3" wide that I would sit next to the tv on a stand. I think this will suit my needs: http://www.circuitcity.com/ssm/Nea-Moda-Wide-TV-Stand-220337-/sem/rpsm/oid/110765/rpem/ccd/productDetail.do

Just have to decide if I want a 46 or 50 inch tv.

subwoofer

04-28-05, 08:51 PM

Just posted this on the Samsung thread but I wrote more there and figured I should cut and paste it here. Sorry if some of it repeats:

I too am considering a 46 or 50" tv (hopefully the 50"). I have a sectional couch that sits anywhere from 6.5' to 9.5' away from the tv now that is facing the wedge of the couch. The bad thing is that the tv now is in a corner and I need a stand that I can still place in the corner that won't stick out too far but still face the wedge. I found this tv stand that is fairly thin and wide enough: http://www.circuitcity.com/ssm/Nea-Moda-Wide-TV-Stand-220337-/sem/rpsm/oid/110765/rpem/ccd/productDetail.do
I think the main concern is getting a stand the isn't any more than 20" deep because for a DLP that is at most 17" deep, why getting anything bigger. I also own Polk RM6700 speakers that are only 3" wide. So I figure a 50" DLP is about 46-47" wide, plus 3" plus 3" plus an inch or two between the speakers and the tv (I plan on putting the speakers on the stand), that gives me a total of about 55" wide.

allenn

04-29-05, 09:21 AM

I added model numbers for my multimedia center and equipment.

smeck

04-29-05, 08:10 PM

This model works great for us

black325xi

05-01-05, 01:44 AM

Here is an idea I have been considering. Go to Home Depot and get 3 over the refrig cabinets. These are 15, 18, or 24 inches high, 24" wide, and 24" deep. Get the center section with no doors for the center channel speaker. Screw the pieces together in the sides, put cove molding on the bottom, and then put a piece of granite on the top.

This should cost about $500 and look like furniture when done. What are your opinions?

Dan

shanec

05-01-05, 05:40 PM

Would it look like a pedestal when you're done? The TV would hang pretty far off each end, right?

Ryan Rhino

05-02-05, 02:56 PM

3 of them would be 72 inches wide... and granite at 74x25 is going to run you a LOT of coin for something that will be covered by a TV. Granite at 60 a square would be over 700 + edging and weight about 800 lbs (65 a sq for 1 inch.

The other option would be granite tile on a 3/4 sheet as the top.

I'd also double check the load capacity of over the fridge cabinets as they are engineered different that base cabinets for load.

Not a bad idea, but maybe more work and $$ than just buying a quality stand.

jimsiff

05-02-05, 07:04 PM

Originally posted by black325xi
Here is an idea I have been considering. Go to Home Depot and get 3 over the refrig cabinets. These are 15, 18, or 24 inches high, 24" wide, and 24" deep. Get the center section with no doors for the center channel speaker. Screw the pieces together in the sides, put cove molding on the bottom, and then put a piece of granite on the top.

This should cost about $500 and look like furniture when done. What are your opinions?

Dan

You could skip the granite idea (HEAVY!!!) and finish the top with 3/4" MDF and some laminate. That would be quick, easy, durable, cheap, and much lighter than granite.

I did a 36x48 3/4" granite slab with full bullnose edges for my kitchen island last year and it was probably 300-350 lbs.

Ed Weinman

05-02-05, 10:23 PM

According to one of the posts, the Ikea OPPLI tv unit with casters ($99.00) originally came in black and birch only to have the black version discontinued (the Ikea site only shows the birch).

Question: Can this Birch veneer be painted, coated, another color? The Ikea site describes the item as ..."Particleboard, Fiberboard, Birch veneer, Clear acrylic lacquer")

millerwill

05-02-05, 11:05 PM

The $99 Oppli stand is 59" wide. If you have an even wider set, you can get three of the smaller Oppli stands ($49 each) and connect them, to have a stand 71" wide (both are 15 3/4 " high). I think I'm going to go this latter route for the Mits 73727 (70" wide) or the Sammy 7178 (68" wide).

Ed Weinman

05-02-05, 11:26 PM

I believe the 59" width is enough for the 6168 (which is 56.9" wide).

But, I don't want it in birch! (He screamed...not at you, millerwill!)

Iceblade

05-03-05, 11:06 AM

Ed,

I believe if you sanded the entire surface, you could paint it a different color (black for instance). The other thing you might want to try is using that new Krylon or Rustoleum brand spray paint that is supposedly made for plastic. If you were in Houston I'd suggest you just give me a couple bucks and take the black Oppli I have off my hands as it is just collecting dust and taking up space in my theater. It'd be a real pain to ship it somewhere or else I'd make the offer.

Good luck,
Jeff

Ed Weinman

05-03-05, 11:11 AM

Iceblade,

Thanks for the info and your offer. Yes, Houston is too far away for me. I need to look for alternative stands.

sawyer1370

05-05-05, 02:17 AM

I just bought a Sony 55WF655. My wife would like something that has shelves on either side to put pictures of the family and stuff. I have looked at all the links on this thread, and wanted to see if anyone had any other ideas. I need a stand that is at least 58" wide for the tv.

allenn

05-05-05, 07:52 AM

Originally posted by sawyer1370
............. My wife would like something that has shelves on either side to put pictures of the family and stuff............I need a stand that is at least 58" wide for the tv.

Check out Lexington Furniture - Entertainment Centers (http://www.lexington.com/) and Ethan Allen Entertainment Centers (http://www.ethanallen.com/ea/com.ethanallen.ecom.FrameDirectorServlet?top=1&body=1). Both of these company make special media centers for DLP, LCD, and plasma TV's.

Also CircuitCity has a great selection of TV stands. Good luck on your quest.

nickavs

05-05-05, 10:02 PM

man why are the samsung stands so expensive???

drinkmilk15

05-05-05, 10:30 PM

i think its because it's oem. prices are pretty ridiculous for every companys matched stands. i think they feel that they can charge more because people are willing to pay more for a stand specially matched to their tv. at least thats the only reason i can think of.

subwoofer

05-11-05, 04:21 PM

^thats just cause the stands fit the tv perfectly. But I need shelfs in it that are at least 17" cause of my deep receiver (yamaha 2400) and I need the top to be at least 55" wide and 18 or 19" deep. No more than 20.

millerwill

05-11-05, 04:54 PM

subwoofer: Sounds like the $99 Oppli stand from Ikea is just what you need. It's not much on esthetics, but works great.

subwoofer

05-11-05, 04:59 PM

59" is getting a bit wide for a 50" tv. I figure a 50" tv from Samsung is 46.5" wide and then add my two 3" wide speakers plus an inch or two between each, and I'm looking at about 55" wide of space for all three to fit on. Plus the Oppli is ugly and too short.

I think the Circuit City one I posted above is nice but I dont think the lower shelfs will fit a 17" deep receiver.

Geckotek

05-11-05, 05:04 PM

Well, looks like I'll be cutting the back panel out of mine to fit my HTPC case. You can always do the the same to make room for the receiver.

subwoofer

05-11-05, 06:09 PM

^the oppli?

Geckotek

05-12-05, 11:14 AM

Originally posted by subwoofer
^the oppli?

No, the Bonde

http://www.ikea.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10101&storeId=12&langId=-1&productId=40155

In Birch w/o the legs....BTW, in store price is $100 cheaper.

Edit: Pic from old apt....looks diff in new house. Maybe I'll get a pic up later.
http://www.avsforum.com/avs-vb/showthread.php?s=&postid=5175901#post5175901

egruber

05-12-05, 12:30 PM

We bought this one from Hooker.

Use R. Name

05-12-05, 06:40 PM

I was traveling in the Seattle area last week and visited a couple of Scandinavian design furniture stores for possible solutions to our TV stand problem. I've been looking for a stand for a while now, thought I had found one, but then had my DH reject the choice because he thought it wasn't nice enough.

Anway, I found quite a bit of selection at these stores (the stores are called Dania and Scan Design) that I hadn't seen before at the Circuit City/Best Buy/Magnolia Hi-Fi, Ikea, etc. stores that I had been trawling.

I found a couple of stands that I liked at Scan Design, but the shipping price to California (where I live) was nearly 50% of the price for the stand so I backed out. So, if any of you live in the Seattle/Washington area or within driving distance of that area, you may want to check out the selection. There were some nice looking ones -- either dark woods with glass or very light woods that were part of larger modular systems.

I also found out that Dania stores are called Scandinavian Design stores in California and visited one near my house in the Bay Area this past week. I found a line called Royal Entertainment that came in Wenge (or espresso) and bought the console piece.

Here is a link: 48" console (http://www.scandinaviandesigns.com/?page=shop/flypage&product_id=1291&category_id=1daa0d19ea4b945e437120f02c136ddd&product_related_id=274)

The piece is 21"H (a little tall but not bad) and 24"deep. I don't recall the exact price (as my husband signed the credit slip) but it was all around $350 including the glass doors. We didn't see the actual piece as it was still in transit but were pointed to a desk set from the same furniture maker. The quality was quite nice -- especially for the price. All in all, it was refreshing to finally walk into a furniture store that had TV stands that were low enough for those owning big screen TVs.

Use R. Name

subwoofer

05-13-05, 01:45 PM

http://www.ikea.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10101&storeId=12&productId=11146&langId=-1&parentCats=10104*10174

This isn't a bad stand from IKEA. I think I might get the Samsung HLR5067w and this would just fit it to the inch in width and it would also fit my deep receiver that is 17". I just wish I could add another 8 or 9 inches in width on this stand to rest my speakers on it.

Anyone have some suggestions?

Tarooka

05-13-05, 04:50 PM

Originally posted by subwoofer
http://www.ikea.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10101&storeId=12&productId=11146&langId=-1&parentCats=10104*10174

This isn't a bad stand from IKEA. I think I might get the Samsung HLR5067w and this would just fit it to the inch in width and it would also fit my deep receiver that is 17". I just wish I could add another 8 or 9 inches in width on this stand to rest my speakers on it.

Anyone have some suggestions?

Can't answer your question, but have one of my own - Can you add castors to this stand? Anyone done it and with what type?

Breddy

05-15-05, 09:18 PM

Is anyone using the Bush Edgewood TV Stand? I'd post a URL but I'm too new to the forum; you can check it out at RacksAndStands.com.

I came across it almost by accident because it looks at quick glance to be a 36" TV cabinet, but look closer ... it is almost 60" wide and 24" deep! And it has shelves/drawers. At nearly 24" high, it would put a 50" Samsung DLP above optimal viewing height, but I wonder if I could just leave off that base piece and shave 3-4" off?

What do you all think? I pick up my Sammy HLR-5067W at SA this tuesday...

-Breddy

millerwill

05-15-05, 09:45 PM

Another stand idea: I'm having one built at a local store that sells unfinished bookshelves, etc. The guy can do it in any size and wood one wants, which is especially good since I'm going to be getting either the Sammy 71" or Mits 73". It's basically a book shelf form (similar to Ikea's Oppli stand, but nicer looking), 72" W, 20" D, 16" H, in solid oak for $270. It will have two verticle partitions, so 3 compartments each about 22" W, each with an adjustible shelf.

Hatboy

05-15-05, 10:21 PM

Just picked up the Bello AT-423T. Im lovin it, fits well my system I think.

http://www.duve.us/tv/mysetup.jpg

subwoofer

05-27-05, 02:47 PM

uiucsb

05-27-05, 02:50 PM

Subwoofer,
Have you thought about the associated TR46x3 stand samsung makes for the hlr5067? Check am* or other places for it. It might work.

subwoofer

05-27-05, 04:43 PM

Yes I have but that will only fit the tv, I need a stand to have two side speakers to sit on.

DanP

05-27-05, 11:11 PM

Need some help guys. A Samsung HLR 5067 will definitely fit on this stand but do you think a Yamaha 2400 receiver will fit on the first (bottom) shelf? My AVR is 17" deep plus cables. This is really the deciding factor.

http://www.circuitcity.com/rpsm/oid/110765/rpem/ccd/productDetailSpecification.do#tabs

I love the stand....bought it about a month ago and put my new panny plasma on it. My Pioneer Elite receiver is 16.5" deep and fits though the right rear corner goes over the end a bit....but the feet sit solidly on the bottom base. If you move the receiver toward the middle where there is more depth you will have no problems. And if you put the glass shelf on the top slots you have about 8.5" height space on the bottom. I have no trouble fitting everything (including a center speaker on the top shelf)....itsa big stand.

aaronwt

05-27-05, 11:45 PM

Sardaan

05-28-05, 09:28 AM

I love the stand....bought it about a month ago and put my new panny plasma on it. My Pioneer Elite receiver is 16.5" deep and fits though the right rear corner goes over the end a bit....but the feet sit solidly on the bottom base. If you move the receiver toward the middle where there is more depth you will have no problems. And if you put the glass shelf on the top slots you have about 8.5" height space on the bottom. I have no trouble fitting everything (including a center speaker on the top shelf)....itsa big stand.

How is the wire management? My biggest concern with this stand (for an HLR5667W that I have on order) is that even with attention to detail I am going ot have a spiderweb of wires in view.

DanP

05-28-05, 12:50 PM

What is the most space you can get on the top shelf? My speaker will be angeled up slightly and I would need 8.5" of height on the top shelf to accomodate my center speaker. This stand looks better than the one I was originally thinking about. If my speaker will fit on the top shelf, I would hopefully still have room on the bottom for my TiVos, DVD, and iScanHD. Also when lowering that top shelf to hopefully get 8.5", what would the height of the lower shelf be?

With the shelf in the highest position you get 7" vertical space in the top shelf and at the lowest position 9" vertical space. At the lowest position you get 6.25" of vertical clearance in the bottom shelf. Each notch up changes you vertical dimension mix roughly one inch.

In regards to cord management, there are two square openings in the center rear support. I don't use them but I suppose it is adequate to route the wiring in a bundle. Depending on how much equipment you have to block view of the the wires, they can be very visible or not too visible at all.

One other tip for y'all buying at the CC B&M....the internet price is cheaper (at least is was a month ago) so bring a print copy of the internet product page so you can get the discounted price.

aaronwt

05-28-05, 04:55 PM

Great. Thanks. I think this is the stand I will get for my Samsung 61" 1080P set. I see it's on sale now. I hope I can still get a good price on it in a couple of months.

subwoofer

05-30-05, 01:15 AM

DanP and everyone else, thank you for the information. I REALLY appreciate it and this is pretty much the deciding factor for my living room being HD :) Also thanks for providing info as to how high I have to fit my receiver. I think I will probably have the receiver in the bottom middle and just put the PS2, DVD player and cable box on the top.

I figure at 58" wide, this stand will be amazing for a 50" DLP that is 46 or 47 inches wide and my two satellite speakers. I also think it has a really nice look to it and is very thin. There's no reason to get a 25" deep stand when you have a 15" deep tv. Wasting almost a whole foot of space.

As for bringing a copy of it to CC, when I looked at my local store they didn't have it and it seems that the stand is only available online. I better jump on this offer soon!

Patrick TX

05-31-05, 01:58 PM

I bought a Pottery Barn "Signature large TV stand" at the Pottery Barn Outlet in San Marcos yesterday for $240. It is an awesome unit! They had bunches of entertainment furniture being blown out. They had these new in the box, as it's discontinued. I got a Mahogany, but they had Black as well.

Stand (http://ww1.potterybarn.com/cat/pip.cfm?src=shpcfurabstvs%7Crshop%2Fshpcfur%7Crshop%2Fcst&pkey=cfurabstvs&gids=p4715)

Outlet locations (http://ww1.potterybarn.com/cs/index.cfm?sect=outlet&src=cst)

skellyo

06-06-05, 11:01 AM

FYI, in case anyone is interested.

I called Salamander furniture last week and was told they now have a quadruple width synergy stand available as well as a new Triple 10 stand. The quadruple is available with a double wide shelf in the center for a center channel speaker. The Triple 10 can have a riser installed on top for a center channel speaker as well. They don't have the info on their website yet, but anyone interested should give them a call. They were very helpful with the information I was seeking.

Idahoguy

06-06-05, 02:51 PM

Why aren't more companies offering something like that $99 Oppli stand from Ikea? It's perfect for so many large-screen TVs, plus it has a center channel spot. I'd order that one, but the shipping is more than $200, believe it or not. That's insane.

millerwill

06-06-05, 05:21 PM

I had a stand made at a local shop that mainly makes bookshelves. It's similar to Ikea's Oppli (3 component compartments, each with an adjustible shelf) but made precisely to the dimensions I specified (72"W, 18"H, 20"D), and is of solid oak (not oak venner on particle board). It has a nicer edge around the front and a 1/8" thick back (through which I cut out openings just to match my components). It was unfinished, but 4 coat of Delft make a very nice American oak finish that is hard as nails. $270 out the door. You might try to find such a shop in your locality.

subwoofer

06-06-05, 10:31 PM

^got a pic?

millerwill

06-06-05, 11:27 PM

^got a pic?

Sorry, but I'm not into digital photog.

Breddy

06-07-05, 08:29 AM

Hi All,

Just wanted to toss in my little contribution to the thread. I went ahead and ordered a Bush Edgewood (http://www.racksandstands.com/prods/Bush-Furniture/VS31543-Cognac-Maple-Finish/0PBU1014.htm) stand for my 50" Sammy DLP. I had a terrible time finding something I liked that was this side of $1000. The Edgewood is certainly wide enough, but is a bit too deep, though the extra interior space is quite nice for large HT gear.

I purchased the stand from RacksAndStands.com and was thrilled as always with their service. The stand, however, is another story.

I wasn't expecting hardwood quality or brick house stability, but the item I received was below even my expectations. It is 100% particle board (as expected) but the veneer is a faux wood-look coating that is super thin. It scratches easily. Indeed, a couple pieces were scratched when I got them out of the box. I'll be calling Bush to replace those pieces.

The stand looks nice enough, and serves the purpose, but I was disappointed enough that I emailed RacksAndStands.com to share my thoughts. I suggested that they downgrade the quality rating (http://www.racksandstands.com/asp/QRatingInfo.asp) of the item from a 3 to a 2, since it better describes the product.

I got a cordial reply from Mark, the manager within a day or two. Not only did he change the rating of the product on their site, he credited my order 10%. Now that is what I call setting things straight. Note that I did not at any time ask to return the product or be compensated in any way.

A+ for Mark and RacksAndStands
C- for Bush Furniture

Anyway, here is a picture if you're interested. I left off the little 3" base so that it wouldn't set my TV up too high for viewing from the sofa (used little nylon feet instead).

http://gallery.avsforum.com/showphoto.php/photo/14855/size/big/

Cheers,

Breddy

vindicator

06-08-05, 02:34 PM

uiucsb

06-08-05, 02:39 PM

I received the samsung stand that goes with the hlr5067 yesterday. Put it together and I think it looks great. It's really nice with the floating screen because the stand is the same color silver as the speaker on the set. This makes the black-bordered screen look even more pronounced. I think the stand is very solid and with two shelves, there is room for 4 components without stacking. After 12 hours (7 of which I was asleep), I like the stand!

Breddy

06-08-05, 02:45 PM

I just got a sammy hlr 5067 and was going to get the bush edgewood stand, now i am not so sure after reading a few posts.
Can anyone suggest a nice stand for the tv, one that has 3 shelves across like the edgewood. I am willing to spend up to 500.

The selection is pretty slim, Vinny. I like the clean lines and warm wood look of the Edgewood. The space inside is dynamite, and it has drawers to boot. Knowing what I know now, I'd probably still get this stand just because there's just nothing else out there that fits the bill. I wanted a Sanus Java, but that is too dark. The Salamander and StudioTech stuff is awesome, but at $1200 and up by the time it is outfitted properly, I just can't rationalize it. The umpteen million metal stands are cool, but not what we want in our current family room.

A very compelling possibility is to have a local woodworking shop make you one. The constructon of something like the edgewood is VERY simple, and the drawer and hinge hardware can be had off the shelf. Based on millerwill's post, I'd say you could do the project well within your $500 budget and come out with something far superior. Poke around the Bush site and see if you can't locate a manual for the Edgewood that has dimensions on it.

If you do go this route, you could easily cut 2-4" off the depth unless you have very large items to place inside. I may investigate local shops myself in the next year or so.

-Breddy

subwoofer

06-20-05, 01:01 AM

I love the stand....bought it about a month ago and put my new panny plasma on it. My Pioneer Elite receiver is 16.5" deep and fits though the right rear corner goes over the end a bit....but the feet sit solidly on the bottom base. If you move the receiver toward the middle where there is more depth you will have no problems. And if you put the glass shelf on the top slots you have about 8.5" height space on the bottom. I have no trouble fitting everything (including a center speaker on the top shelf)....itsa big stand.

Question about this tv stand: http://www.circuitcity.com/rpsm/oid...ication.do#tabs

I saw it this weekend at Circuit City and noticed how the bottom shelf is a wood finish. Can this be painted black? I'm not really liking the wood bottom to this stand.

aaronwt

06-20-05, 08:28 AM

What color was the bottom? It looked black in the picture. This was the stand I plan on buying in a few weeks. I thought the bottom was black.

DanP

06-20-05, 09:18 AM

Question about this tv stand: http://www.circuitcity.com/rpsm/oid...ication.do#tabs

I saw it this weekend at Circuit City and noticed how the bottom shelf is a wood finish. Can this be painted black? I'm not really liking the wood bottom to this stand.

I don't see why not. It's a very sturdy wood (or whatever the h*ll it's made of.) I never notice the wood finish. After all, you have equipment on it and if you have carpeting it will further obscure the woody look.

subwoofer

06-20-05, 09:44 AM

smeck

06-20-05, 05:09 PM

Here's a pic of my stand I found it a bit expensive but the waf (wife acceptance factor) made it worth it.

aaronwt

06-20-05, 07:30 PM

^The stand has a wood finish on the bottom. It really really looks black in the picture but if you read the description, it says maghogany (sp) finish. You can really notice it more in person.

Might get that stand but I'm not sure what to use to paint the bottom black and not have it look cheap. Also it would be nice to match that black with the legs of the stand.

Here's another thin yet wide stand that I might get for a 5067 Samsung DLP: http://www.circuitcity.com/ssm/Tech-Craft-DLP-and-Flat-Panel-TV-Stand-PTV583-/sem/rpsm/oid/114635/rpem/ccd/productDetail.do I completely different look but it will work for me.

I considered that stand, but at 20" it is too high. The other stand was 18" which is better and about as low as you can get and still get two decent shelves. Any lower and you only get one shelf. But the Mahogany color throws a wrinkle into my purchase. I'm not sure how that color would look with black and silver.

subwoofer

06-21-05, 01:29 AM

^exactly. I don't want wood on my stand cause I will have hardwood floors soon. Thats why I'm wondering how nice of a job painting it would be.

Phish Fan

06-21-05, 03:19 PM

I'm on a serious hunt for a stand for my Sammy 46" DLP.
Every one that fits my criteria (admittedly a bit stringent) is WAY too expensive.
I've gone through most of this thread, and I've seen some good suggestions, but none really being The One.

Criteria being: Wood grain; black and silver wont do. About 65" wide (no more than 70" no slimmer than about 58") about 20" high (no more than 22, no lower than about 17") and about 16" deep (no more than 20"). I need room for an STB, reviever, CD changer, DVD, turntable, and center channel speaker.

Here's the best option I've seen, the Bello AVSC-2517MC. BUT it's about $1000 and I can't find it anywhere.
I can't figure out how to post pics, but here's a link>>> http://www.bello.com/index.php?partition=show_product&prod_id=163&categ_id=40

Am I just being too picky?

You can PM me suggestions. Thanks a lot.

Jim_Clark

06-21-05, 03:33 PM

Am I just being too picky?

You can PM me suggestions. Thanks a lot.

No, don't think so. Maybe because I'm in the same boat. That bella would look good elsewhere, but not in my room. I'm assuming you've seen the triple twenty from Salamander? It meets your measurements but not necessarily the storage capacity for all your gear. Plus, CC placement is tough, I know, I just came from the dealer.

For my part, I'm wondering if the addition of the riser will accomodate my Klipsch RC-3. Course that will also boot the price to about 15 hunnert buckaroos. Hey, in the end if that's the best I can find it's the best I can find. If only they made a center cabinet wider than the other two it would be perfect!

Sanus may have an option for me in their component line, but it doesn't look as good. Would be about 600 cheaper though. Oh yeah, forget that PM stuff, I need the information too!

Good luck, I don't seem to be having any.

Regards,
jc
Lenexa, Ks

Phish Fan

06-21-05, 04:13 PM

The Salamander Triple 20 is a good one, but $850 (before shipping) is too steep for me. I'd like to keep it below $450-$500, but, at this point I'm not sure that's possible with so many specific requirements.

subwoofer

06-21-05, 04:22 PM

Spending more than $500 for a stand is insane in my opinion. Especially for something that I need to be about 20x20x50 or 60. Most people wouldn't pay more than $500 for a tv let alone a stand. We are a rare bunch :)

I still can't decide if I want a 46" or 50" DLP. This will change the type of stand I need. Either 50" wide or 58" wide. I wanna put satellite speakers on the stand as well.

Jim_Clark

06-21-05, 05:06 PM

Spending more than $500 for a stand is insane in my opinion.

Well, not going to argue that point, too much anyway :)

If you look at more like a piece of furniture rather than just a TV stand then, at least to me, it makes at least a little sense.

Regards,
jc

thommy

06-21-05, 07:44 PM

I've given up trying to find a stand the wife approves of, let alone one I can afford! My plan is to have something built to my exact specifications at a custom woodworking shop. We had them build us a couple of bookcases a few years ago out of solid cherry. Not fancy, but very nice looking. I don't expect to have to pay more than around $300 for exactly what I want -- including 17" height (which is majorly difficult to find in a stand nowadays, although I don't know why!).

JimProuty

06-22-05, 10:44 AM

This is what we'll be using for our 42" projection LCD TV, as it has glass doors, is only 18" high, costs around $300, and looks like real furniture (part of the WAF in play):

Coffee Table with drop down glass doorDoors open on both sides. Dimensions: 46"L x 24"W x 18"H; weighs 60 pounds. Comfort House item 80586F.

We're getting one from Kitchen Kaboodle in Beaverton, OR, but here's an online site's picture for reference: Metro Coffee Table (http://www.comforthouse.com/comfort/table.html).

Brucer

06-22-05, 12:01 PM

Earlier in this thread I had posted a pic of a floating cabinet….here’s another design I will be starting on soon for a local client, that still has a bit of a floating look, but is lower to the floor. His main problem was his toddler keeps poking in his tweeter on his B&W HTM1 center channel, so he wanted to be able to protect it, via flipper doors. This will match other furniture I have previously done for him. I may have a second order for this at slightly different size coming, as well. This unit sits n front of a nearly all glass wall, otherwise he would have hung the display on the wall.

Next is another part of my ‘Audio Protein’ line sized for a DLP, with center above, I also have other orders for this type cabinet [mostly in Rosewood or Ebony] at various lengths and heights [Buffet style = 3 bays wide]. Many More designs over at AV123 forum [Brucer’s Corner].

http://forum.**********/photopost/data/500/6EggerCredenza10sm3.jpg

http://forum.**********/photopost/data/500/6RocketRackDLPoverunder2.jpg

two2deep

06-22-05, 12:42 PM

Ikea TV Stand Link (http://www.ikea.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10101&storeId=12&productId=11149&langId=-1&parentCats=10104*10174) I was not going to pay the $600 for the TV stand for the Sony. I also looked at building my own. Then I stumbled across this
(I Just pasted the link 6 posts!!! )

I spent $99 for a Beautiful and Strong stand

Go to Ikea and follow this
home --> Bookcases & storage systems--> TV & media solutions --> OPPLI TV unit with casters
There are 2 units. This one is $99. It has large dimensions.
Width: 59 "
Depth: 19 5/8 "
Height: 15 3/4 "

It is perfect for most Large projection TV's.

They also sell a swivel stand for $40 that effortlessly allows you to turn the TV to the right or left.

I just thought that I'd pass this on to you guys.

Enjoy

JimProuty

06-22-05, 03:33 PM

The Tech Craft TV Swivel Stand - CAB50 is a nice inexpensive ($171) silver-colored stand.

Tech Craft TV Swivel Stand - CAB50

Features:

* Sculpted base and top.
* Adjustable shelves.
* Tempered glass doors.
* Easy assembly.

Approximate Dimensions:

* Height: 17 1/2"
* Width: 50"
* Depth: 21 1/2"

Phish Fan

06-22-05, 03:34 PM

Brucer, you have some great designs, but I suspect they are well out of my price range. Do you have any sort of catalog or are all designs customs? Could you recommend a builder in the philly area?

RonC

06-22-05, 06:17 PM

I didn't see this stand mentioned, but here's another alternative.

Though it's 22.25" high, it may be workable for some, and it also has optional casters which *may* lower the height.

I can't post an URL yet, so here info:

Website: Stands & Mounts
Model: StudioTech HF-33BS (black & silver) or HF-33BB (all black)
Free shipping.

RonC

EEBuckeye

06-23-05, 09:03 AM

I am looking for a wood tv stand (about 46 inches wide for my Samsung HLR5067) with two glass bookshelf type cabinets on either side. I want them all to match and would actually like to get two end tables and a coffee table to match also.

I have found Bush furniture that I like, but it is only particle board and would have to be shipped. I would like better quality, but I like the look of this Bush Citizen setup:

http://www.bushfurniture.com/bushindustries/thumbsbymodel/searchbymodel.jsp?id=&id2=CIT&id3=&id4=Citizen%20Collection

Any suggestions without a huge price increase?
Thanks!

Phish Fan

06-23-05, 01:00 PM

Website: Stands & Mounts
Model: StudioTech HF-33BS (black & silver) or HF-33BB (all black)
Free shipping.
RonC

now we're getting somewhere...those deminsions are near perfect for my set-up. I might be able to convince the g/f on an all black. free shipping is tough to beat.

thanks for the suggestion, I'm feeling a bit more optimistic now.

VA Ringer

06-23-05, 03:34 PM

You had asked about the inside of the cabinet. I could not add attachments to the IM so here is another pic. Good Luck...

Phish Fan

06-23-05, 03:42 PM

You had asked about the inside of the cabinet. I could not add attachments to the IM so here is another pic. Good Luck...

I like that cabinet a lot. Alas, it's too wide for my rig (isn't it 74"? 70 is my absolute max)

Brucer

06-23-05, 03:58 PM

Brucer, you have some great designs, but I suspect they are well out of my price range. Do you have any sort of catalog or are all designs customs? Could you recommend a builder in the philly area?

Thanks,

The ‘Audio Protein” line is a pre-order limited production run products where one can specify various heights / widths / configurations as well as finish options [Diffusion Black or Veneer]. [See previously referenced forum for more info]. Most everything else is custom.

I have a brother who lives just outside of Philly, but he is all thumbs, sorry.

subwoofer

06-23-05, 11:31 PM

I need some help. I am thinking either on the Samsung HLR 4667 or the 5067. I have a few stands lined up for the 50" model but its the 46" one that I am having trouble with. As my last few posts have said, I need a stand to hold the tv and that isn't too deep. I also want one that is wider than the tv by about 7-9 or so inches so that I can place my satellite speakers on. I've been searching around for a bit tonight and I can't find anything decent. Any suggestions?

wendyky

06-27-05, 01:21 AM

I've been an avid reader of this forum for quite some time now since I've been in a market for a new TV. I finally pulled the trigger and pre-ordered a Samsung DLP 6168 but have been having a hard time finding a stand that similar to the TR61X2 but with two shelves instead of just one.

Does anyone have the Gusdorf 57" Stands (18421) from CC? It is the only one I could find with a width of 56.9" like the TR61X2. Sorry I can't post a link because I don't have 5 posts yet. :o

Also, does anyone know if the pedestal base on the 6168 is hard to remove? Or do you think it will look okay to leave it on?

Any advice would be greatly appreciated. Thanks. :)

aaronwt

06-27-05, 09:50 AM

They don't seem to hold much weight. Between the 6168 and my Center channel speaker I would be past the weight limit. I looked at the set an considered it, but am still leaning toward the Nea Moda stand (http://www.circuitcity.com/ssm/Nea-Moda-Wide-TV-Stand-220337-/sem/rpsm/oid/110765/rpem/ccd/productDetail.do) at CC. It's an inch lower which is better and 18"x58"x19". I thought I read somewhere that it held more weight, but maybe some on the forum posted that info. The one thing I am unsure of is the mahogany color of the base. If it was black, or glass it would be perfect. The Gusdorf looks like it has only enough space for one component on each shelf also. I'm not sure my speaker would fit on it.

thegoldenhand

06-27-05, 01:59 PM

Ok I am taking the plunge on the Bush TV Stand from CCity (http://www.circuitcity.com/ssm/Bush-Plasma-DLP-TV-Console-VS1358801-/sem/rpsm/oid/93511/rpem/ccd/productDetail.do). I particularly like the space in the middle that will fit my Athena .5 center speaker and then the 3 drawers that can keep my remote controls and some other personal effects.

Phish Fan

06-27-05, 02:20 PM

I was in Ikea this weekend-- planning on buying an Opilli to hold me over until I find a better one-- and saw a new model. It's the "Lack Entertainment Center" but I don't see it up on the web-site.

It's about 64"W 21" D. It's built like a center-- as opposed to a stand --in the sense that it has poles, extending up from the 4 corners, holding a top shelf. It's damn near ideal b/c you can put speakers on top of this platform. It also has a bottom shelf, below the shelf that holds the t/v. And it sits on large casters. If any of that makes sense.

Sorry I can't give a better description. It's all I can remember. Here's a brilliant rendering of what I recall (the single line being the floor).

==========================
=tvtvtvtvtvtvtvtvtvtvtvtvtvtvtvt=
=tvtvtvtvtvtvtvtvtvtvtvtvtvtvtvt=
=tvtvtvtvtvtvtvtvtvtvtvtvtvtvtvt=
=tvtvtvtvtvtvtvtvtvtvtvtvtvtvtvt=
=tvtvtvtvtvtvtvtvtvtvtvtvtvtvtvt=
=tvtvtvtvtvtvtvtvtvtvtvtvtvtvtvt=
==========================
=componentscomponentscompon =
=componentscomponentscompon =
==========================
0___________________________0

It's very simple and open (only 4 poles and 3 shelves, no back or sides) probably ideal for many. I think it was $195. Alas it's too deep and wide for my set-up.

Jim_Clark

06-27-05, 02:37 PM

thegoldenhand

06-27-05, 04:56 PM

How wide is that center channel speaker opening? I've been running into problems with that dimension all over the place.

Thanks,
jc

I will let you know once I pick up and assemble the stand sometime this week. I just eyeballed the size of the middle shelf and I think the .5 center will fit. What center channel speaker do you have?

Jim_Clark

06-27-05, 06:06 PM

aaronwt

06-27-05, 09:34 PM

How high is it? I need 8.5" for my Polk which is the problem with most of the stands I've looked at. Most of them only have around 7" of clearance.

thegoldenhand

06-28-05, 12:20 AM

The Athena .5 center is about 5" high and the width is about 15". BTW, CCity has this listed at 239.99 which is the lowest I've seen anywhere else. Fatwallet has a coupon code for CCity's friends and family event. I saved an extra 10%.

mogurf21

06-28-05, 02:30 PM

I have a bombay mahogany tv stand and rack that I put all my A/V equipment in as well as my center channel which is on top of it... looks rich and compliments the rest of my room....
http://www.bombaycompany.com/gp/detail/B0002JOXZC/3672201/103-4474867-2297410
I got mine on a 50% off deal at bombay a while back--- awesome rack...

subwoofer

06-28-05, 03:31 PM

any have any suggestions for a 50" wide stand that is 20" deep or less?

Jim_Clark

06-29-05, 04:20 PM

Finally got a stand, well at least it's ordered. Lemme tell you, this is one big monkey I'm glad to finally have off my back.

In the end I was able to customize a Salamander system that will do everything I wanted it to do, and then some. Apparently this isn't a common solution, perhaps since it ended up being fairly long at 86 inches? The Sony's KDF-55XS955 is 62 inches wide so there is a bit of unnecessary lenght there. I can't post any pics but I can describe what I've done.

I started with an SVDO unit in the center and I'm putting a single S20 on either side. Cherry finish, perforated steel sides on the S20's and perforated steel doors as well. The perfortated steel is genious for keeping components cool and out of sight. I was concerned about the appearance, until I saw in action. Works for me.

I would have vastly preferred just getting the triple 20 but my CC is too big to fit into the opening of a single 20 without pushing it back behind the posts. Really would prefer to not have to deal with edge refraction, much less whatever passing through a perforated steel door would do (acoustic or not!). But using the SVDO gives my CC all kinds of room as well as some additional space to bump up the WAF with some simple decorating.

Cost is something of an issue, since it ended up being about 14 hunnert and lord only knows how long it's going to take to arrive. *rant starts ahora mismo* I don't think this is the perfect solution, especially given the cost, but after hours of scouring stores and the internet it was the only real solution that presented itself. I think furniture makers are missing out on an opportunity since these types of widescreen tabletop televisions are becoming the norm, as is at least a basic HT experience. I've seen some very cost effecient and beautiful pieces. Ethan Allan for example has some incredible tables but what they all have in common is a lack of space for a CC speaker that isn't pint size. Ethan Allan, The Pottery Barn, et. al., aren't HT companies so I can understand their lack of understanding. What really burns me is the companies like Sanus and Salamander that I'd think would know better, but still haven't quite got it figured out yet. Sure, I eventually came up with an idea that works but criminy even the shops where salamander was on display can't fit a center channel in. There's something wrong with that.*end rant*

Good luck and happy hunting
jc (finally lets out a deep sigh)

aafflyer

06-30-05, 12:23 AM

thommy

06-30-05, 02:01 AM

Charlie -- Nice stand! Is it a commercial product, custom made, or DIY?

What's the height? It looks like a good height, which is hard to find in a commercial product.

Brucer

06-30-05, 10:27 AM

Last Call for the previously shown maple credenza [or similar], I'll be starting production shortly.

skellyo

06-30-05, 10:33 AM

Charlie -- Nice stand! Is it a commercial product, custom made, or DIY?

What's the height? It looks like a good height, which is hard to find in a commercial product.

His stand is a JSP Industries Jazzy.
http://www.jsp-industries.com/Pages/Jazzy.html

There is a .pdf at the bottom of the linked page that shows all the dimensions.

BTW, it's a heck of a good looking piece. The local Sound Advice stores here have it on display.

skellyo

06-30-05, 10:38 AM

Jim_Clark

06-30-05, 05:28 PM

Did you happen to call Salamander prior to your purchase? They offer a quadruple 20 Synergy piece now with a double wide center shelf for a center channel below the TV. The double wide shelf has a center support below it, but nothing in the middle to interfere with a center channel sitting on it. With the quad 20, it's 87" wide. A Salamander customer service person quoted me an MSRP of $1435 for a quad 20, double wide shelf, sides and 2- 20" doors. It sounds a lot like what your intentions were, but in a bit more complete package IMO.

Also, Salamander has a triple 10 synergy unit out now where you can add a riser on top for a center channel. This keeps TV height around 20"-21" and allows for center channel placement below the TV.

The main thing that bugs me about Salamander though is that they are silly slow at updating their website to reflect the new products.

grrr.

Well, I actually did know about the triple 10 as I saw it at the local dealer right before I plunked down my deposit on the "custom" jobbie. Just not enough component storage for my needs. You know, amp, pre, STB, CDP, DVDP, and I still have occasion to use a VCR (Miracle Mile isn't available on DVD!)

That quad unit though-no I didn't know about it and yes I did call Salamander and the solution was never presented. double grrr.

jc

skellyo

06-30-05, 06:05 PM

grrr.

Well, I actually did know about the triple 10 as I saw it at the local dealer right before I plunked down my deposit on the "custom" jobbie. Just not enough component storage for my needs. You know, amp, pre, STB, CDP, DVDP, and I still have occasion to use a VCR (Miracle Mile isn't available on DVD!)

That quad unit though-no I didn't know about it and yes I did call Salamander and the solution was never presented. double grrr.

jc

I certainly understand not getting enough storage with the triple 10.

Shame on Salamander for not recommending the Quad 20 to you though. I guess I just happened to speak to the right person as she had just priced out a Quad 20 for someone earlier in the week.

thegoldenhand

07-02-05, 05:05 PM

I will let you know once I pick up and assemble the stand sometime this week. I just eyeballed the size of the middle shelf and I think the .5 center will fit. What center channel speaker do you have?

Finally picked up this stand. As someone mentioned earlier, this is quite a task to put together. I spent 5 hours assembling it. I kind of took my time to make sure that I do not scratch anything and make sure that I was doing things correctly. I started at about 10PM last night and finished the assembly by 3AM today. Whew! But overall I am happy with the stand. Not bad for a $230 tv stand that's got all the shelves that I need and 3 drawers than can keep the remotes, manuals and other stuff. Just make sure to add some felt padding on the bottom so that you can easily slide it when needed and also to protect your floors from scratching.

95se

07-03-05, 09:16 AM

Hey all,
After way too much research (as usual) I bought the Bush Edgewood VS31543 stand from CC. Like others have said, it's a good size, good price, and looks nicer than you'd expect in that price range. Yes, it takes significant time to assemble.

The problem is that I wanted to make sure everything fit so I went to the bush site to get the dimensions:
Bush Furniture Edgewood Specs (http://www.bushfurniture.com/bushindustries/bushfurniture/productdetail/productdetail4.jsp?id=VS31543&id6=&id7=EDG&id8=)

The spec sheet is WRONG! The center channel section is listed as 18.32" wide, which would be perfect for my klipsch center channel (18.1-ish?). However, once I bought and assembled this damn thing the center channel area is about 17.9" wide. The discrepancy is that these clowns (Bush) did the measurement center to center of the vertical wooden supports, not the actual shelf dimensions!

So, I'm bitter. Right now I've got my center channel in one of the sides, so I've got to open the door to use it. I'm debating my options; return? belt sand 1/4" off my center channel? leave as is? replace center channel?

:mad:

Jim_Clark

07-03-05, 12:04 PM

So, I'm bitter. Right now I've got my center channel in one of the sides, so I've got to open the door to use it. I'm debating my options; return? belt sand 1/4" off my center channel? leave as is? replace center channel?

:mad:

I'm thinking of starting a club. Wanna be my VP?

jc (very sorry to hear that it didn't work out as well as you'd hoped)

skellyo

07-05-05, 12:44 PM

We finally picked out a new TV stand for our Samsung 56" DLP. Currently we have it on a BDI Axis 8024 stand that is too narrow by about 2 inches. I got tired of looking at it hanging over the edges, so we have been looking for a new unit to fit our needs. We ended up ordering a piece from Ethan Allen in their new Horizons collection. The dimensions are: 68 " w x 23 1/4" d x 25 " h. It's a little taller than I'd like at 25", but I can live with a couple of extra inches in height to get the look we wanted. Here is a link to it on the Ethan Allen Website:

http://www.ethanallen.com/jsp/universalprod.jsp?itemID=289842&mainSelect=4&subSelect=1

Idahoguy

07-05-05, 10:13 PM

Well, here's another vote for the Oppli from Ikea. A friend of mine picked one up for me (there's no Ikea in my city) and brought it to me the next time we met up for a visit. It was quick and easy to put together (particularly with a cordless drill), and it is absolutely perfect. The height is great (only 15 inches tall, just right for my Optoma) and the center channel fits right in the middle shelf on top of my DVD player.

I don't know why anyone would spend a bunch of money on ugly metal stands when you can get this solid, nice-looking Ikea stand for $99.

aaronwt

07-08-05, 11:58 PM

So did anyone get the Gusdorf 57" Stands (18421) form CC? I looked at it tonight, along with the Nea Moda stand. I think the Gusdorf might match the Samsung TV better, but the Quality of the Nea Moda seems to be much better. I'll have to try and decide in the next few days. I want to get it next week so I will be ready for my Sammy 1080P set

subwoofer

07-10-05, 10:41 PM

http://www.racksandstands.com/prods...2T/0PBB0079.htm
This one is nearly perfect for me. Actually it is perfect (a bit expensive but hey, what the heck).

Anyone here own this stand?

digitard

07-11-05, 06:17 AM

My problem was that I have a low couch and a very 'neutral' living room.

My couch is a lower couch than most (about 4") and my living room has a very oriental/asian theme to it so most entertainment centers either stand out too much, or feel out of place.

When I was at IKEA today I saw this large, and low, coffee table that was on sale in their -AS IS- section pretty cheap so I grabbed it on impulse and I'm VERY happy with it. I sit perfectly and it has that neutral look I wanted.

Image link:
http://www.lockdownhosting.com/images/newtv.jpg

I am very happy w/ it. Eventually I'm going to get an A/V rack and just go w/ another type of stand, but I like this so far.

D.

lander215

07-11-05, 12:44 PM

For those of you trying to find a nice stand (albeit a bit expensive for what it is), we purchased this one for our Sony 42": http://www.bestbuy.com/site/olspage.jsp?skuId=5678411&type=product&productCategoryId=cat03116&id=1056281191336

We had to fit it into a corner by our fireplace but only had a 44" x 44" area to fit the stand into. This one fits just perfect. I didn't want any pressboard in the stand at all, so that rules out most of the stands at CC so I ended up at BB to see what they had.

Fedreams

07-15-05, 01:07 AM

Here ia a stand that might fit someone's taste and budget.

http://eurofurniture.com/shop/item.aspx?ProductID=3031&CatID=26

aydn

07-15-05, 04:01 AM

Does anyone think buying a 61 inch TV's stand and using it for a 50 inch will make the 50 inch look even smaller and negativly effect the TV's look?

videoaddikt

07-15-05, 08:19 AM

Does anyone think buying a 61 inch TV's stand and using it for a 50 inch will make the 50 inch look even smaller and negativly effect the TV's look?

I think stands should be equal or at least close to the width of the display. But that's strictly a personal taste issue.

fakerley

07-18-05, 05:09 PM

"I'm actually going to be using two Dish receivers until the new 942 comes out so that will make four components."

The new 942 is out. Mine is coming on July 26th. :D

subwoofer

07-18-05, 07:59 PM

Does anyone think buying a 61 inch TV's stand and using it for a 50 inch will make the 50 inch look even smaller and negativly effect the TV's look?

A tv is as big as it is. I plan on getting a 46" or 50" DLP (they are about 43 and 47 inches in width) but I wanna get either a 52 or 55 inch stand so that I can have two speakers on the side of the tv and on the stand too.

subwoofer

07-18-05, 08:00 PM

"I'm actually going to be using two Dish receivers until the new 942 comes out so that will make four components."

The new 942 is out. Mine is coming on July 26th. :D

what is the 942?

schaffer970

07-18-05, 08:43 PM

what is the 942?

Dish network HD DVR.

subwoofer

07-23-05, 06:16 PM

http://www.racksandstands.com/prods/Bello/AVS-522T/0PBB0079.htm

Anyone have this?

and what do you guys think it would be like with a Samsung 4667w or 5067w on it? I would also squeeze two satellite speakers on the side, that's why I need a wider stand.

thommy

07-24-05, 06:00 PM

jbarbbcuny

07-24-05, 10:36 PM

The new annual Ikea catalogue is out. I got a copy inserted in my local paper today (The Bergen Record). There's a new TV stand shown, the kull. p. 138, 58 inches wide, only 10 inches high, on casters. It's not shown on the website yet. Very simple, clean design.

Mitch G

07-24-05, 11:18 PM

I'm looking for a way to attach my satellites to a wooden TV stand.
I want to raise the sats to be about even with the middle of the screen and on either side of the TV.
(Right now, the sats are below the screen on a shelf in the TV stand.

I can't use speaker stands since there's a fireplace hearth right next to one side of the TV stand.
So, I want to find something like a wall mount speaker mount that actually raises the speaker by, say, 18 inches.
That way I could attach the mounts to the left and right sides of the TV stand (as if the sides of the TV stand were walls) and then mount the speaker such that they are raised up about 18 inches.

Any suggestions?

Thanks,

Mitch

subwoofer

07-24-05, 11:45 PM

I'm planning to buy a 56" DLP and am looking around for a stand to put it on. My top contender at this point is a Bello stand:

http://www.bello.com/index.php?partition=show_product&prod_id=104&categ_id=40

I like the way it looks and it's only 18.5" tall, but it's also only 52" wide. 52" seems to be a popular width for stands, but the set I'm looking at is 52.4" wide. OK, that's a measily 0.2" overhang on each side. Should I be worrying about it as much as I am? :confused:

.2 shouldn't be a problem at all.

I love that stand but its 24" deep and thats a bit much. As for height, I'm not sure if that one with 18" high or the one I have linked at 21.5" high is better. Wish I knew where the middle of the screen was. anyone?

jbarbbcuny

07-25-05, 08:42 AM

.2 shouldn't be a problem at all.

I love that stand but its 24" deep and thats a bit much. As for height, I'm not sure if that one with 18" high or the one I have linked at 21.5" high is better. Wish I knew where the middle of the screen was. anyone?

I don't know where the middle of the screen is on the new ones. I have last year's HLP. I find that it's better, if my eyes can't be level with the middle, to be below middle rather than above. My current stand is about 18 inches high and I'm very happy with that height. But you need to also look at the height of your furniture and your body height, as well as that of your house mates, to determine an average range that's acceptable. Try practicing sitting on various piles of cushions on top of your sofa to see the effect of different viewing heights before you make a decision on the height of a TV stand.

thommy

07-25-05, 08:50 AM

.2 shouldn't be a problem at all.

I love that stand but its 24" deep and thats a bit much. As for height, I'm not sure if that one with 18" high or the one I have linked at 21.5" high is better. Wish I knew where the middle of the screen was. anyone?
There are links to technical drawings of all the Sammy HLRs in the first post of this thread:

http://www.avsforum.com/avs-vb/showthread.php?t=493443

Using the drawing for the 5668, I was able to calculate that it's 22.4" from the bottom of the set to the middle of the screen. Eye level when my wife and I are seated in the living room is roughly 37.4", so ideally I'd be looking for a stand 15" high, but the Bello is the shortest stand I've found that my wife has liked, and that's well worth the additional 3.5".

subwoofer

07-25-05, 02:57 PM

^Thanks. I also really like this stand but its 22" deep. http://www.bello.com/index.php?partition=show_product&prod_id=89&categ_id=40 I just feel that if you have a tv that is barely 15" deep, why have an extra 7 or 9 inches? Althought I need a bottom shelf that will hold my massive AVR that's 18" deep.

I will have to go home tonight and measure where my head is at when I'm sitting up or when I am more slouched (sp) with my feet up on the coffee table. I think my eyes are around the high 30s so a 21.5" high stand with a 467 or 5067 should put me right below the center.

Brucer

07-25-05, 05:57 PM

Thommy,

My professional opinion is that it will look to top heavy. Given that the top of the stand is overhanging glass with the actual support legs narrower, and placing a large rectangular box on top. Proportions would be more aesthetic, if the display was no more than the width of the base.

Bruce

PS. You could always photoshop an image of the two together, to give you a better predicted perception.

thommy

07-25-05, 07:29 PM

^Thanks. I also really like this stand but its 22" deep. http://www.bello.com/index.php?partition=show_product&prod_id=89&categ_id=40 I just feel that if you have a tv that is barely 15" deep, why have an extra 7 or 9 inches? Althought I need a bottom shelf that will hold my massive AVR that's 18" deep.
Yeah, that's another one I bookmarked, but my wife wants a stand with wood, so all of those nice looking (in my opinion, not hers!) glass-and-metal stands are out!

Oh, well.

thommy

07-25-05, 07:35 PM

My professional opinion is that it will look to top heavy. Given that the top of the stand is overhanging glass with the actual support legs narrower, and placing a large rectangular box on top. Proportions would be more aesthetic, if the display was no more than the width of the base.
That's what I thought, too, in my heart of hearts. I was just hoping someone would say, "I have exactly that setup, and it looks great!"

I found a way cool looking stand that's 53.5" wide and only 17.7" high, but it appears to be difficult to get (and I'm just waiting to hear how too expensive it is!).

http://www.soundations.com/product.asp?loc=HT&c=c

Scroll about 2/3 of the way down the page and look for the La Casa 2.

Anyone have any experience with products from Soundations?

wookie9876

07-28-05, 11:29 AM

I'm getting an HLR-5668 in a few weeks, and am trying to figure out what stand to buy. I was going to buy the Bello AVS-455, but was told that its not going to be released until the end of August. (http://www.bello.com/index.php?partition=show_product&prod_id=146&categ_id=40)

Has anyone bought the Z-Line 55" stand? It has almost identical dimensions as the Bello stand, but I'm not sure about its build quality.
http://www.circuitcity.com/ssm/Z-line-Designs-55-TV-Stand-Z53-55S-/sem/rpsm/oid/126258/rpem/ccd/productDetail.do

I'd like the stand to be at least as wide as the 5668, but I can't go any wider than 56 inches. Do you have any other recomendations?

Phish Fan

08-03-05, 03:17 PM

I've found, if nothing else, a temporary solution to my stand problem.
Believe it or not it's a shoe-rack from Ikea. Seriously. It's the Leksvik; measures W47 1/4" x D14 1/8" x H17 3/4" and costs just $70.

My g/f noticed it in the new catalog, and what drew her attention was a pad resting on top of it, indicating it was also a bench. Regardless, I was still worried about it holding the weight of my t/v, but I gave it a few sits and the sucker didn't budge. So I figure if it can hold me, it can hold my 70lb. tv.

Stock photo is attached, but keep in mind the 2 vertical panels--b/n the middle and outer walls--can be removed creating 2 long shelves.

There is an issue though, no center slot for a center channel. I currently have it on the top right shelf, but plan on hanging a shelf above the t/v for the cc.

After I get speaker stands I'll post photos of my set-up.

Iceblade

08-03-05, 03:23 PM

Yeah, the Ikea stuff tends to get the job done. I finally coerced myself to just take the old black Oppli stand out to the curb on trash day since it was no longer being used. I replaced my HLN-617W1 with the HLP-5685 and haven't looked back. The Oppli was just sitting in the theater off to the side of the room and holding my 2 year old's toys. I got tired of it being in the way and pitched it.

Later,
Jeff

subwoofer

08-03-05, 03:29 PM

poor kid :(

haha

Iceblade

08-03-05, 03:32 PM

LOL.. the toys were removed from the the stand prior to the stand's ousting. :)

No children or toys were harmed in the extrication.

And given the ten point three trillion toys that she has (thanks, Gramma :rolleyes: ) I doubt she would miss the ones that were in the theater. ;)

Regs,
Jeff

boblopes

08-09-05, 03:09 PM

http://www.racksandstands.com/prods...2T/0PBB0079.htm
This one is nearly perfect for me. Actually it is perfect (a bit expensive but hey, what the heck).

Anyone here own this stand?

Yes, on Saturday I bought that stand (522T) for my HLR6168 that is arriving on Friday. I paid $299 in NH for it. I assembled the rack together, but have not put the glass in. Waiting to put the stand in place first. It is a tad bit narrow for the tv, but did not want to spend more $ or go with the 62" wide one. Another decision maker was my mirage center channel that is 7"h x 22.5"w .

kimarndt

09-17-05, 06:36 AM

I am having trouble with my Samsung TV stand (TR46X3) that is designed to be used with my Samsung HL-R5668 DLP. The stand has an upper platform that comes in three pieces so that you can build it for the 46" and 50" models too. The problem is that there is no support for the floating speaker except on the ends. After my TV sat on the stand for about a month, the platform sags and the speaker started to bend. The ends actually curved up almost 1/2 inch giving it sort of a smiley face look. Very disappointing that Samsung couldn't do a better job with this stand. I am trying to get my money back from Samsung since it's not the vendor's (TVA) fault. Although Customer support at TVA has been very receptive to replacing the stand, they only can offer the TechCraft stand as a replacement. Does anybody have a good stand for their 5668? It looks like a Z-Line Maxim will work nicely, but is about 2 3/4 inches too wide. Has anybody tried the TechCraft stand with this TV? It looks like it might be about 58" wide which is 6 inches too long. I am wondering if anybody else is calling Samsung on this issue too.

two2deep

09-17-05, 08:52 AM

Do a search under my user name two2deep. You will see the stand that I bought from Ikea. It looks much better. It has the same wood grain that you are looking for.
I am not sure about the dimensions but my sony 55xs955(it early I always get the model # mixed up) But that model has the speakers on the side and look detached from the TV. It fits perfectly on the stand. Please check it out. Look for my ID earlier in this thread. Good luck.

Joe Hendrix

09-17-05, 12:37 PM

That's what I thought, too, in my heart of hearts. I was just hoping someone would say, "I have exactly that setup, and it looks great!"

I found a way cool looking stand that's 53.5" wide and only 17.7" high, but it appears to be difficult to get (and I'm just waiting to hear how too expensive it is!).

http://www.soundations.com/product.asp?loc=HT&c=c

Scroll about 2/3 of the way down the page and look for the La Casa 2.

Anyone have any experience with products from Soundations?

So... did you get this stand? I was curious about the price? It looks pretty sharp!

RGrim

09-29-05, 02:27 PM

This seems to be a pretty old thread but I feel obligated to post pics of the custom built, solid red oak stand I built for my 62" Mitsubishi. Let me know what you guys think.

Brucer

09-29-05, 08:43 PM

Several pages back I shared a design [renderings] of a Plasma Credenza….B&W HTM1 accomodating…. It could just as well suit a table top RPTV. Here’s the actual finished product, Two 20” wide component compartments, and a very large center channel compartment for a B&W HTM1. Doors retract into the top.

I call this “Nuk Not Included…or how to child proof those tweeters”

This replaces an metal open stand after the client had to buy another tweeter…culprit looks more innocent than he really is.

Single slice of Birds-Eye Maple used on flipper door fronts, Framed with curly maple and curly maple sides. Cracked glass laminated top to follow later [client supplied].

Heavy Krell amp and other goodies behind 20” wide component compartments. Adjustable tilt on center channel.

http://www.av123forum.com/photopost/data/500/6EggerCredenzaPic2.jpg

Geckotek

09-29-05, 11:44 PM

Both of them...VERY nice. Jealous.

steverobertson

09-30-05, 08:38 AM

This seems to be a pretty old thread but I feel obligated to post pics of the custom built, solid red oak stand I built for my 62" Mitsubishi. Let me know what you guys think.

That is sweet how about building one for me ;)

RGrim

09-30-05, 09:02 AM

You come and pick it up, I will build.

steverobertson

09-30-05, 09:23 AM

You come and pick it up, I will build.

Not sure if I can pick it up but I can have it shipped up how much to build one?

RGrim

09-30-05, 09:37 AM

steverobertson

09-30-05, 09:40 AM

I'm building one for my neighbor now. Charging him $400 for a finished project. Keep in mind, this is a solid red oak cabinet, it weighs in at about 150lbs or more. All shelves are either doweled or biscuit jointed and all edges with be routed. I will attach another pic once I finish mine off in ebony this weekend.

Well I just may take you up on this offer any chance it can be done in a dark cherry color as my wife would complain it didn't match the rest of the furniture. Also how long does it take to build once I give you the go ahead?

Where in VA are you my inlaws are in the Smith Mt area

RGrim

09-30-05, 10:02 AM

steverobertson

09-30-05, 10:35 AM

Once I got the wood cut, I had it put together in about 8 hours. What seems to take so long is finishing off the project, day 1-sanding, day 2-staining, days 3,4,5-sanding and clear coating, I always apply 3 coats of clear. The only thing I would need from you is at what height and width you would need the shelves, they are NON-ADJUSTABLE. I live in the big old town of Fredericksburg.

Ok great once I decide which TV I am going with I will track you down as I really like what you have built. I am not impressed with the store stuff at all.

I have been to Fredericksburg several times I love that area.

kregstrong

09-30-05, 11:48 AM

im looking for a fairly cheap priced tv stand for a 52hmx95, anyone know any good places to look?

jbarbbcuny

09-30-05, 11:56 AM

im looking for a fairly cheap priced tv stand for a 52hmx95, anyone know any good places to look?

http://www.ikea.com/webapp/wcs/stores/servlet/CategoryDisplay?catalogId=10101&storeId=12&categoryId=10174&langId=-1&parentCats=10104*10174&cattype=sub

MtBikerE

09-30-05, 05:42 PM

http://www.bush-furniture-online.com/bush_VS11536-03.html

for a Sony 50" RP tv?

reverse

09-30-05, 06:25 PM

Wow Brucer, that looks very professional!

yo_philly

10-06-05, 07:06 PM

Stumbled across this thread while searching for a TV stand. I see I'm not the only person having trouble finding a good stand for Plasmal/DLP type TV :)

I'm waiting for my DLP to be delivered any day now - Samsung HL-R5078W. I went to Raymour & Flanigan Furniture today and they had what I think is by far the nicest stand on the market (for the price). Color is wrong for our home decor, but I'm tempted to overlook that. Check it out. Perhaps it might be perfect for some of you out there.

This is my first post so it will not allow me to post the link. Go to raymour flanigan's website. Click on the "Search the Catalogue" link. Change the Vendor to "Progressive Furniture". Click "Go!". Scroll down until you see "Item: Cherry 2 Pc. Plasma TV Stand"

waltzonice

10-06-05, 11:46 PM

Brucer

10-07-05, 02:04 AM

Here’s another custom designed unit I’m just finishing up on. I call it the Library Table Stand. It is made for a DLP TV & large Onix Rocket center channel [speaker = 25.5”w X 12”h x 10.5”d @ 46lbs.]. This piece is a more traditional design to complement clients other traditional room furnishings. Leg columns are solid hand turned [5.75” diameter @ top and bottom]. Construction utilizes traditional mortise & tenon joinery with beefy arched cross braces. Independent roll-out floor shelf holds two components. [8” clearance] Client has another separate rack.

AnthemAVM

10-07-05, 09:57 AM

Those at Room and Board look pretty nice, my problem is I have a center channel that is about 8" high and 14" wide.

I am also looking for something in Craftsman Mission Style.

http://www.roomandboard.com/images/rnb/product/image/578425.jpg

http://www.roomandboard.com/images/rnb/product/image/299501.jpg

Michael

Mathue73

10-07-05, 12:22 PM

Anyone have the Norrebo from Ikea? Corner unit. I haven't seen it mentioned yet I don't think.

I only have a DVR and a DVD player so thinking this looks decent for the price. Harder than I thought to find a corner unit at least 58 inches wide.

lexx

10-08-05, 09:43 AM

I have also been looking for the right stand. I want something that looks more like a piece of furniture. I saw some at a local home theatre shop by a company called Laurier Furniture (Canada) and those are probably the closest to what I'm looking for. The component shelves are designed to turn to make it easier to access the back of the units. I'm not allowed to post a link yet, but it is laurierfurniture (one word)

I looked at Laurier furniture, and got them to send me a cataloge. For some reason the model I had seen in an audio store was no longer produced. You can try this Laurier link (http://www.laurierfurniture.com/eng/sectionvip/sectionvip.html) and enter Laurier as both username and password. That should let you download their catalogue. No promises though.

I found finding a stand almost a hard as getting the TV. I didn't purchase the TV (Samsung 6168) until I had the stand sorted out. I ended up getting a stand from BDI, theAvion 8529 (http://www.bdiusa.com/whats_new/avion.shtml). I happened to find it locally, but they are readily available online. It isn't cheap, but like most things, you get what you pay for. I can get all my equipment inside, including centre speaker and a sub woofer. There are vents everywhere for cooling. The shelves, the bottom, and the back has sliding vented panels as well for easy access. The legs have wheels built in so you can move it fully loaded with one hand. It's very cool and has been well thought out.

Cheers

Big Worms

10-12-05, 11:40 PM

This seems to be a pretty old thread but I feel obligated to post pics of the custom built, solid red oak stand I built for my 62" Mitsubishi. Let me know what you guys think.
Nice stand! What are the dimensions?

maximum360

10-12-05, 11:52 PM

I ended up picking this stand for my 60" SXRD (just a few more days :D ) :

http://images.channeladvisor.com/Sell/SSProfiles/30056218/Images/dlp58x.jpg

With this stand, at a fraction of the cost, I'll have roughly the same height as the Sony stand and more than enough room for my center speaker on the bottom shelf.

jonathanR

10-13-05, 11:15 AM

Hey Maximum:

Do you have a link for that stand, what brand/model?

maximum360

10-13-05, 11:27 AM

http://www.circuits2u.com/pages/TECDLP58X.htm

Purchased from buy.com for slightly cheaper price and shipping was reasonable.

allenn

10-14-05, 04:01 PM

Bob Timberlake has some really nice stands. Here's mine with a Z-line stand from Circuit City:http://www.frankiesilver.com/Entertainment Center/P2030031W_small.jpg. Check out the link below for more pictures and details. :)

Brucer

10-17-05, 01:56 AM

As I mentioned above...here is the finished product...

Sometimes comtemporary style just won't do, and a more traditional flavor is in order.

Made to coordinate with existing furniture, very stout, with beefy components.

It had to accomodate a large center speaker [Onix Rocket Bigfoot] @46lbs but only needed a couple component spaces due to a separate equipment rack [bottom independent shelf].

Construction includes pegged thru mortise and tenon joinery, hand turned 5.75" diameter legs, and 1.75" thick x 3" wide arched stretchers.

Speakers are Macassar Ebony.

Built-in tilt for perfect aim at seating position. Again, no enclosure for center channel to resonate in. Speaker brackets can be removed [same with the shelf]and table utilised as an occasional table, if one sees fit later on.

Any size, shape, or species is possible.

Bill97Z

10-17-05, 09:37 AM

I got the integrated stand for my toshiba 52" DLP. I love the way it matches and it fits all my components perfect!

RGrim

10-17-05, 10:38 AM

Just so everyone knows, anybody relatively local needing a custom built tv stand, let me know. I'm not trying to advertise or anything but I have a work shop in my back yard where I build furniture as a hobby. I know tv stands are hard to find with all the features some are looking for so custom built is the way to go. The main benefit of going with a custom built stand, no particle board. Christmas is coming so the month of December is going to be busy.

grider

10-17-05, 06:52 PM

I got the integrated stand for my toshiba 52" DLP. I love the way it matches and it fits all my components perfect!
Your pic illustrates perfectly why these TV's do not need side mount speakers. I imagine you will use the tower speakers as do most large screen owners. So if the TV had bottom mount speakers or removeable speakers you would have an extra foot to play with.

Bmr4life

10-17-05, 10:09 PM

Your pic illustrates perfectly why these TV's do not need side mount speakers. I imagine you will use the tower speakers as do most large screen owners. So if the TV had bottom mount speakers or removeable speakers you would have an extra foot to play with.

I always wondered why they do that. seems pretty impractical.

JJMJGNX

11-02-05, 01:14 PM

Can anyone tell me the height of the stand for the 62827 Mits DLP TV?

AttaQ

11-02-05, 03:15 PM

Brucer

11-03-05, 01:17 PM

Thanks AttaQ

Since I don't get to live with my designs, I seek pleasure and satisfaction from the process.

Brucer

11-09-05, 08:20 PM

This Audio Protein Buffet was recently shipped to Albany, New York to go under a FP screen. Very solid unit, 1-1/2" bullnosed top and bottom in 'Diffusion Black' catalyzed light textured finish [tough as nails]. Shelf is adjustable, other units in the works include Ebony, Rosewood and Maple 8" columns. 19" component width spacing. Sizing built to suit.

http://www.avsforum.com/avs-vb/attachment.php?attachmentid=45923

videobruce

11-12-05, 04:44 PM

As I mentioned above...here is the finished product...
Sometimes comtemporary style just won't do, and a more traditional flavor is in order.
Made to coordinate with existing furniture, very stout, with beefy components.
It had to accomodate a large center speaker [Onix Rocket Bigfoot] @46lbs but only needed a couple component spaces due to a separate equipment rack [bottom independent shelf].
Construction includes pegged thru mortise and tenon joinery, hand turned 5.75" diameter legs, and 1.75" thick x 3" wide arched stretchers.
Speakers are Macassar Ebony.
Built-in tilt for perfect aim at seating position. Again, no enclosure for center channel to resonate in. Speaker brackets can be removed [same with the shelf]and table utilised as an occasional table, if one sees fit later on.
Any size, shape, or species is possible. Norm is jealous........... ;)
Where did you get THAT name from? :rolleyes:

tommy def

11-12-05, 07:23 PM

What do guys think custom build

videobruce

11-13-05, 10:44 AM

As in you?
How are those glass shelves supported?

Brucer

11-13-05, 05:24 PM

VB,

I seriously doubt he would be, I actually met him once, and he didn't seem like the jealous type:) But thanks

Name origin is from my ex-wife's nickname for me.. [ bruiser] spoken affectionately...not as in wife beater :eek:

Tommy's unit is reminiscent of a Soundations design, where the glass is a single pane extending thru the center [I'm betting].

-----

I may have someone interested in my Altar design...stretched for length:

http://www.av123forum.com/photopost/data/500/6AudioAltarLongSm2.jpg

Only problem is financing the $600 custom shaper cutter, ouch!

videobruce

11-14-05, 04:45 AM

I seriously doubt he would be I wasn't referring to him being Norm.............

tee.edwards

11-14-05, 01:09 PM

rbbnet

11-14-05, 01:59 PM

Here is the Lack entertainment center (http://perth.ikea.com.au/Template_room.asp?page_id=18137300141001&site_id=30014&se_id=12) on the Ikea Australia site. Another view. (http://perth.ikea.com.au/prod_template4.asp?product_id=23498&se_id=37&page_id=52632300251026&Cat=22&Scat=81)

LACK... yep it Lack's beauty all together. It looks more like a storage shelf you'd find in somebody's garage. Just my personal opinion.

grider

11-14-05, 07:01 PM

Have you seen these nice modular TV stands I posted in another thread? Make your own custom design !

http://www.salamanderdesigns.com/syn/syn_gallery.jsp

tee.edwards

11-14-05, 10:34 PM

LACK... yep it Lack's beauty all together. It looks more like a storage shelf you'd find in somebody's garage. Just my personal opinion.

Jeez - that's what I get for trying to help!

Meanwhile, I think I've talked myself into the Bello AVSC-2517MC (http://www.bello.com/index.php?partition=show_product&prod_id=163&categ_id=40). Is that any better from your standpoint?

richardmayo

11-15-05, 12:08 AM

The Java Urban Loft 60" Console from Costco caught my eye. Does anyone own it, or have any additional pics?

Link to it at Costco.com (http://www.costco.com/Browse/Product.aspx?Prodid=11094467&whse=BC&topnav=&cat=28194&hierPath=23006*)

RU Geekman

11-15-05, 09:25 AM

Several pages back I shared a design [renderings] of a Plasma Credenza….B&W HTM1 accomodating…. It could just as well suit a table top RPTV. Here’s the actual finished product, Two 20” wide component compartments, and a very large center channel compartment for a B&W HTM1. Doors retract into the top...Nice job, Brucer! I've been away from this thread for a while and missed your post a while back about this credenza. Does your customer find that his Krell amp does not overheat in this enclosed space? Even with the doors open, I'd think that the 20" width is a tight fit for such a large amp. Please e-mail me with info on what this unit cost to build (with and without the plasma support bars), if you would.

omegadsl

11-16-05, 02:42 PM

During my neverending search to find a "furniture-type" TV stand with a height suitable for my Samsung 6168, I came across this site:

Modloft (http://modloft.com)

To see the stands they offer, check the 8th and 9th pages of their catalogue. They have about 15 or so.

They don't seem to offer different finishes (only a wenge finish) and seem to be made of MDF with a veneer. Some of them also don't seem very functional (for IR reasons and possibly ventilation). Still, "furniture-type" stands with such a low height are difficult to find so I thought I'd share the info.

Brucer

11-17-05, 04:29 AM

Thanks Geekman,

So far so good. The inside width is slightly wider than the openings, and the cabinet well ventilated. The Krell amp [a heavy beast] was previously parked in the bottom of a wall unit rack on a slide out shelf [with even less clearances], I built a few years ago for him. That tall unit had pocket doors, and never had any heat problems, although I’m fairly sure he left doors open most of the time system was in use. I’ve yet to have to add fans for cooling to any unit I have designed and built, this includes rack mount pro gear racks for sound reinforcement systems. Of course pro gear tends to have fans in the components, anyway.

Kadence

11-19-05, 04:16 AM

I was looking at stands for the Samsung 6168w, because the official TR61X2 is a bit too short for me at 17". But the one (Z-line Z22-1S (http://www.circuitcity.com/rpsm/oid/93807/originURLEncoded/http%253A%252F%252Fwww.circuitcity.com%252Fccd%252Fcategoryl ist.do%253Fcmpstr%253D%2526bMore%253D%2526N%253D20012866%252 B20012892%252B1317%2526No%253D40%2526catOid%253D-12892%2526PAGE_ACTION%253D%2526c%253D1/rpem/ccd/productDetailSpecification.do), 22" tall) I'm looking at most closely is slightly too small for the TV - only 55" wide, while the TV is 56.9" wide. Might this present a problem - should I worry about it?

Other stands I was looking at include the Gusdorf 18421 (http://www.circuitcity.com/ssm/Gusdorf-57-TV-Stand-18421-/sem/rpsm/oid/125214/catOid/-12892/rpem/ccd/productDetail.do) (19.25") and the TR63 (http://www.bestbuyplasma.com/plasma/Product.asp_X_SKU_Y_TR63_Z_REF_Y_NEXTAG) (20.3"), the stand for the older Samsung 63 series.

rbbnet

11-19-05, 08:32 AM

Take a look at this stand as it sounds like it will fit in the size dept you're looking at. All metal/steel and glass contemporary open shelf type stand.

Dimensions: 59-1/8"W x 17-3/4"D x 19-7/8"H
http://www.walmart.com/catalog/product.do?product_id=3601502

"When only ultra-contemporary style will do, Bush's Platinum Mist 60" Flat Panel TV Stand is for you. Tempered glass shelves rest on vibration-dampening rubber pads for enhanced sound quality. Eye-catching open architecture allows you to configure your components however you wish. Tested for tip stability with your safety in mind."

Kadence

11-19-05, 06:41 PM

Thanks for the rec, but I need a stand that's 57" or less wide.

tee.edwards

11-23-05, 01:23 PM

Last night I put together my Bello AVSC-2517MC (http://www.bello.com/index.php?partition=show_product&prod_id=163&categ_id=40). This thing is really nice. It weighs 120 pounds, and is solid as a rock.

Unfortunately I had to remove the feet from my Kenwood VR-4090, which can't be good for it. I had worried about having room for my center channel, and hadn't even thought about the height of my largish receiver. On the bright side, I would kinda like an excuse to ditch the receiver anyway - hopefully it will last until HDMI-capable receivers are more affordable.

fuzzball

12-15-05, 08:43 PM

Unfortunately I had to remove the feet from my Kenwood VR-4090, which can't be good for it. I had worried about having room for my center channel, and hadn't even thought about the height of my largish receiver. On the bright side, I would kinda like an excuse to ditch the receiver anyway - hopefully it will last until HDMI-capable receivers are more affordable.[/QUOTE]

You're right.....there's lots of nice stands out there but few that will work with certain components and speakers. I like your choice of Bello but I finally had to go with the AVS-2601. It had about the most usable shelf space. (height and width).

fresno1232001

12-18-05, 09:24 PM

I see one person here has it and loves it, but I have a 45 lb Pioneed RT-707 reel- to-reel tape deck and I just won a 42 lb HK AVR-635 receiver on e-Bay. I want to put a Technics SL-1300 turntable on something and my new Panasonic S-97 DVD player on it too. The AT-423T just scares me. I have the Bello AT-422T rack which is its companion. They do match, but the thing I have supports the lower glass shelves in little clips at two points attached to the two front legs, and the glass then slides into a slit in the rear center column. That gives each glass shelf three points of support. With the AT-423T, each glass shelf is supported only by the two little clips at the sides. The shelves are rated to hold 50 lbs each, but with components like mine, I fear I am too close to the limit wrt the tape deck and the HK receiver. How much weight is anybody trusting to this rack? Does anyone think about 45 lbs on two of the 4 shelves would be safe? Bello has another 5 shelf rack that has 4 straight legs and looks a lot safer (the AT-4211), but it has a companion that also has 4 straight (vertical) legs and so it might look funny with my three-legged AT-422T, two of whoes legs come up and back at an angle. The AT-423T's legs also come up and back at an angle so it matches what I have, but is it safe for 45 lb components?