Due to a last minute cancellation, I now have an available calibration appointment on Monday (1/23) in the SoCal area. If you would like to get your display calibrated, please PM me.

i have a tc-p50st30 and was wondering if after my initial 100 hours
break in..should i spend the money to get it calibrated or use the SPEARS and MUNSIL disc i have? the guy wants 375.00 to calibrate my tv. and if i do get it pro cal'ed is it going to need it again after 1000 hours? and finally...will i notice a huge difference in PQ? thanks in advance

I bought a Panasonic P55VT30 (Store Model) a few months ago. I live in Northern Va, metro DC. Looking to have it calibrated. I need some techs to hit me up with some prices and a reason why I shouldn't go with Best Buy.

Thanks In Advance...

I bought a Panasonic P55VT30 (Store Model) a few months ago. I live in Northern Va, metro DC. Looking to have it calibrated. I need some techs to hit me up with some prices and a reason why I shouldn't go with Best Buy.

Thanks In Advance...

Here is an article I just read today and it will explain why a best buy cal is not really something one would want.
http://www.tlvexp.ca/2011/12/hit-and-run-calibration-drive-by-shootings/

Here is an article I just read today and it will explain why a best buy cal is not really something one would want.
http://www.tlvexp.ca/2011/12/hit-and-run-calibration-drive-by-shootings/

Very Good Read!!!

Thanks!!!

Now all I need is a Calibration Technician located in my area...

Here is an article I just read today and it will explain why a best buy cal is not really something one would want.
http://www.tlvexp.ca/2011/12/hit-and-run-calibration-drive-by-shootings/

+1; furthermore, this assumes the 'answer' is even correct at all with the BB cal.

Very Good Read!!!

Thanks!!!

Now all I need is a Calibration Technician located in my area...

Not sure were you are located....but this should help

THX CALIBRATORS (http://www.thxvideotech.com/forum/showthread.php?542-THX-Certified-Video-Calibrator)

Hope this helps.
RayJr

BullsEye Calibration - serving Auckland, New Zealand (http://www.bullseyecal.co.nz)

Anyone in the Milwaukee Wisconsin area?

TIA: Menace

Anyone in the Milwaukee Wisconsin area?

TIA: Menace

I'll be in Wausau but not until May.

I'll be in Wausau but not until May.

That should work. PM me contact info please.

I am looking for a calibrator in the Tucson, AZ area for two Pio Elite's. Let me know if anyone will be in town soon! Thx!

Mark

I am looking for a calibrator in the Tucson, AZ area for two Pio Elite's. Let me know if anyone will be in town soon! Thx!

Mark

Lee Gallagher
Michael Hamilton
Frank Kondilis

Check this LIST (http://www.avsforum.com/avs-vb/showthread.php?t=1058269) for their contact info


.

PM sent.

I am looking for a calibrator in the Tucson, AZ area for two Pio Elite's. Let me know if anyone will be in town soon! Thx!

Mark

Due to a last minute cancellation, I now have an available calibration appointment on Monday (1/23) in the SoCal area. If you would like to get your display calibrated, please PM me.

wow...i guess i'm a week late to this thread. my bro in nyc got his vt25 (along with his pioneer sc-35) calibrated by you a while ago and has been very pleased. i'm in orange county, ca, and looking to get my tv calibrated. any idea when you'll be back out this way, assuming you've left already?

wow...i guess i'm a week late to this thread. my bro in nyc got his vt25 (along with his pioneer sc-35) calibrated by you a while ago and has been very pleased. i'm in orange county, ca, and looking to get my tv calibrated. any idea when you'll be back out this way, assuming you've left already?

First week of March :) PM sent.

Per the ISF website I locate and email my closest available:


"Inquiring as to whether you offer ISF calibration. I live in blahblah" (I am in Iowa)

I get:

"We can provide Reference calibration service but not actively pursuing new "ISF" certification business. Tell me more about your need or request."

Wth is reference calibration service? I am asking for ISF? Why are you on an ISF website offering that service then? Not too impressed right off the bat.

Not sure what to respond...if I do.

^^^
Maybe this will be a little more help.

THX CALIBRATORS (http://www.thxvideotech.com/forum/showthread.php?542-THX-Certified-Video-Calibrator)

Hope this helps.
RayJr

I am looking for someone to calibrate my LG 42LK450, preferably as soon as possible. I live in Hillsborough, NJ (08844).

I am looking for a calibrator in the Tucson, AZ area for two Pio Elite's. Let me know if anyone will be in town soon! Thx!

Mark

Lee Gallagher
Michael Hamilton
Frank Kondilis

Check this LIST (http://www.avsforum.com/avs-vb/showthread.php?t=1058269) for their contact info


.

Hey riosrancho, same here...I'm in Glendale, AZ, and I couldn't remember the name until "turbe" posted a reply. Lee Gallagher is the guy that I remember in another thread that is a top calibrator. I just broke the 300hr barrier on my 55VT30 (that I purchased in November). So I'll be going to him. He has his own website.

I'm looking for a calibrator Summerville, SC (29483) for my new Samsung PN64D7000. Any recommendations?

I'm looking for a calibrator Summerville, SC (29483) for my new Samsung PN64D7000. Any recommendations?

PM sent.

Anyone in Denver, Colorado ?

It's going to be one of these two :

Sony XBR-55HX929

Or,

Panasonic TC-P65VT30


Thanks!!

Anyone in Denver, Colorado ?

It's going to be one of these two :

Sony XBR-55HX929

Or,

Panasonic TC-P65VT30

Thanks!!

PM Doug Blackburn as he handles your area.

Anyone in Denver, Colorado ?

It's going to be one of these two :

Sony XBR-55HX929

Or,

Panasonic TC-P65VT30


Thanks!!

PM sent

I just ordered a Sony XBR 55HX929. I am looking for a professional calibrator in Chicago South west suburbs.

Hey riosrancho, same here...I'm in Glendale, AZ, and I couldn't remember the name until "turbe" posted a reply. Lee Gallagher is the guy that I remember in another thread that is a top calibrator. I just broke the 300hr barrier on my 55VT30 (that I purchased in November). So I'll be going to him. He has his own website.

Yes. I regularly service Glendale, as well as, Tucson and I have extensive experience calibrating each of your displays.

Feel free to give me a call, email me or contact me through my website's contact page.

I am looking for someone to calibrate my LG 42LK450, preferably as soon as possible. I live in Hillsborough, NJ (08844).

Does anyone here know whether Ed Johnson has a screen name on AVS? I am trying to schedule an appointment with him for my LG but haven't gotten a response since last Thursday. I have tried both his e-mail and phone.

I'll contact him and let him know

I'll contact him and let him know

thanks

Yes. I regularly service Glendale, as well as, Tucson and I have extensive experience calibrating each of your displays.

Feel free to give me a call, email me or contact me through my website's contact page.

Thanks Lee! Will be giving you a call.

Who is coming to Dallas and when? Need help with an Epson 9700UB...thanks!!

Who is coming to Dallas and when? Need help with an Epson 9700UB...thanks!!

I will be in your area in April and also offer audio calibration to bring all of your home theater up to the best it can be. www.accucalhd.com/pricing-quote.htm

any in maryland.... particular in southern maryland ?

any in maryland.... particular in southern maryland ?

I will be there early next month. PM me for details.

Anyone in the Milwaukee Wisconsin area?
TIA: Menace

I'll be in Wausau but not until May.

Buzz,
You can stop by my place on your way back from Milwaukee.
Please PM me with contact and schedule info.

Buzz,
You can stop by my place on your way back from Milwaukee.
Please PM me with contact and schedule info.

PM sent.

I tried searching this thread, but couldn't find anything definitive. I'm wanting to get a 65gt30 calibrated. I live in Las Vegas, NV. Can anyone share some recommendations or steer me in the right direction?

I saw the name David Abrams mentioned a few times. But it looks like he does tours or something. Sorry, I'm new at this.

Thanks

Hi MrVizio,

You are correct! We do tours from time to time and our next trip to Las Vegas will be in mid April. If you are interested in having your display calibrated then please email me your system and contact details and we'll get you on the list.(dave@avical.com)

Best,

Dave

A new tour has been set for my THX/ISF Video System Calibrations in Ontario. The dates will be between February 17-20. I have a few spaces left available; please contact me to see if I will be around your area during those times.

Areas covered:

1. THX/ISF Video calibration in OTTAWA. This will be the main area of work.

2. Video Calibrations in Ontario along Hwy 401: from Oshawa to Kingston to Cornwall & Lancaster

I will accomodate areas further from this path if the time schedule permits.

All video calibrations are done with the industry reference Konica-Minolta CS-1000A spectroradiometer and a 3D signal pattern generator for 3D video calibrations.

To reserve a space on this tour, you can PM me on this site, email me by clicking on my signature below, or call me at 905.730.5996.

Cheers to great looking video!

I have a couple of tours planned for March, including Texas-Oklahoma-Kansas early in the month and Iowa-Minnesota-Wisconsin-Chicago at the end of March.

If anyone is interested in scheduling with me, you can contact me a 314-226-1705 or via eMail (doug AT clearlyresolved DOT com).

March-April 2012

March 1-2 - Houston, TX area

March 3 - San Antonio, TX area

March 4-5 - Austin, TX area

March 6-8 - Dallas/Fort Worth, TX area

March 9-10 - Oklahoma City & Tulsa, OK areas

March 11-13 - Lawrence, KS & Kansas City, Jefferson City, Columbia, MO areas


March 27 - eastern/central Iowa

March 28-29 - Rochester and Minneapolis/St. Paul, MN area

March 30-31 - Madison and Milwaukee, WI

April 1-3 - Chicago, IL area

Can anyone recommend a calibrator in Central NJ?

The rub is that I am currently in grad school full-time, and cannot necessarily afford a $300-400 calibration. I'd like to avoid going over $200, and want to avoid Best Buy (per advice here). Anyone running specials? Or amateurs/aspiring professionals who need practice for a reasonable rate?

Thanks!

Btw, LN40D630

Can anyone recommend a calibrator in Central NJ?

The rub is that I am currently in grad school full-time, and cannot necessarily afford a $300-400 calibration. I'd like to avoid going over $200, and want to avoid Best Buy (per advice here). Anyone running specials? Or amateurs/aspiring professionals who need practice for a reasonable rate?

Thanks!

Btw, LN40D630

PM sent.

D-Nice, did you get my messages or e-mails ?
JY

D-Nice, did you get my messages or e-mails ?
JY

No. Please PM me.

D-Nice, pm sent

just picked up a Samsung UN55D8000 LED and was wondering if there is anyone in the Charlotte area that does a good job calibrating?

just picked up a Samsung UN55D8000 LED and was wondering if there is anyone in the Charlotte area that does a good job calibrating?

PM sent.

Hi guys I'm new to calibrations so bear with me. I just got a Samsung PN64d8000 I'm thinking to have it calibrated my question is I'm staying in Boston.MA for a month but I'm planing to send my TV to my home county where I plan to use it. The room where I have my TV right now looks more or less the same as the one I have in my country. My question is if someone calibrates my TV and I disconnect the power to my TV because I'm sending it to my country will the setting that the calibrator did will they erase or will it somehow stay saved in the TV. Also In my county the electricity sometimes goes away for a couple of hours if that happens does the setting stays the same or do I have to copy the settings in a paper and do then again when the power comes back on. I live in Santo Domingo, Dominican Republic I don't think they have ISF calibrators there or the right equipment to do it over there.

The calibration will stay saved but write down all the calibration numbers anyway for a backup. It only takes 5 minutes.

Any recommendations for ISF/THX calibrators in the Illinois suburb area? Planning on picking up the Panasonic TC-P55GT30 in the next week or so and would like some information.

Thanks!

I am local to the St. Louis Metro East area, and I regularly tour to the Chicago area, with my next trip coming at the end of a IA-MN-WI tour scheduled for end-March/early April.

I have lots of experience with Panasonic plasmas, including recent VT/GT models. You can learn more about my background and experience, including customer reports, here. This link also includes my contact info.

http://www.isfforum.com/details/clearly-resolved.html

Also, here's some very recent "live" feedback on a VT30 calibration:

http://www.avsforum.com/avs-vb/showthread.php?p=21663208#post21663208 (scroll down for other posts)

I am both ISF- and THX-certified.

Any recommendations for ISF/THX calibrators in the Illinois suburb area? Planning on picking up the Panasonic TC-P55GT30 in the next week or so and would like some information.

Thanks!

I am in need of a good calibrator in Central California (San Luis Obispo, CA). Any good calibrators service this area? I have a Elite PRO-60X5FD in need of calibration.

Be glad to. Contact me by phone or email please -

b

Looking for calibrators in the SF Bay Area with experience of the Panasonic xxVT30.

Thanks

Looking for a calibrator around the Jersey Shore. Anyone have any recommendations?

Looking for a calibrator around the Jersey Shore. Anyone have any recommendations?PM sent

Hey guys I got the Samsung PN59D8000 instead, it will arrive on Feb 29. Im staying in Malden,MA but I'm leaving on the end of March to my country. I know that is better to use the TV for 200-400 hours before calibrating but in my country there is no ISF certified calibrator. Any recommendation for a good ISF calibrator in Boston,MA area

Looking for a ISF calibrator in the Victoria BC area.

I would like to have my older Samsung HLT6189S (LED DLP) ISF calibrated or wonder if it is even worth it as the set is 3 years old.

Thanks

Hi, I just purchased Mits WD-82740 and need calibration for my tv. I can't spend more than 200 as I'm tight on budget. I'm in Herndon, VA. Can anyone PM me with details? Thanks for your time and help.

I recently had Jeff Meier at AccuCal calibrate my JVC RS-50 and Anthem D2v pre/pro. Based on my experience, I can recommend Jeff without hesitation. He substantially improved the projector (which had been calibrated by someone locally). He increased light output, balanced the color, and increased contrast ratio, leaving me with a significantly better picture than I had before. I'm now getting the very best out of the projector, and therefore my money's worth. He also improved the audio performance and made recommendations for treatments for the room. Highly recommended and absolutely worth the money.

http://www.accucalhd.com/

Due to a last minute cancellation, I now have one calibration appointment available in the SoCal area. If you would like to take advantage of this cancellation, please send me a PM or email scheduling@audiovideofidelity.com.

What's up guys?

Just got my Samsung PN64D7000. Who is available in the Orlando area to offer calibration on my new TV. I will want to wait for a few hundred hours of use before I get it done but would like to know if anyone is in the area and some pricing.

Thanks,

Dan

I have one (afternoon or evening) appointment slot available in the Dallas area on this coming Monday, March 5.

If interested, contact me (Doug) on 314-226-1705.

What's up guys?

Just got my Samsung PN64D7000. Who is available in the Orlando area to offer calibration on my new TV. I will want to wait for a few hundred hours of use before I get it done but would like to know if anyone is in the area and some pricing.

Thanks,

Dan

Don McLaughlin
http://www.pvcalibrations.com/

Can anyone recommend anyone for the detroit area? Want to get my VT30 calibrated

thanks!

I'm fairly local (3 hrs from Detroit) and will be there Monday. Tuesday would be a possibility.

just bought a new epson 8350 and want to get it calibrated.
also want my audio set up calibrated
any calibrators in florida or are any tours planned to this area?


thanks

just had my samsung b8500 calibrated by d-nice. first off, i'm embarrassed to admit how uncalibrated my set was before d-nice put his hands on it. my numbers were off the charts bad! d-nice was able to bring respectability back to the tv. he was super courteous and thorough and spent a good amount of time explaining to me what he was doing. the tv looks considerably improved...not that anyone here has any doubt in d-nice's abilities.

Need a good calibrator for my Samsung PN59D8000 for march 5-14 in Boston, Ma.

Name: Chris Woods

Company: Houston Custom Installers

Email: ChrisWoods@HoustonCustomInstallers.com

Equipment: Laptop computer with CalMan v4, X-rite Spectrophotometer probe, Hubble, Quantum Data 780 Pattern Generator.

just bought a new epson 8350 and want to get it calibrated.
also want my audio set up calibrated
any calibrators in florida or are any tours planned to this area?

thanks

Talk to Donnymac here on AVS, he is a good calibrator and is in FL.

Just some feedback guys...

I had Chad B calibrate my VT30 today and I've been putting in Blurays since he finished up the calibration and I can say it's a very noticible difference.

I loved the picture before but hadn't truly known what I was missing out on until it was calibrated. It really is THAT much better. Would almost venture to say a night and day difference (that's an unintentional play on words being that he stored both a day ISF setting and a night ISF setting). This was definitely well worth it.

He was professional, courteous, and took the time to make sure I fully understood the improvements that were made and how/why they were beneficial.

I would highly recommend to anyone looking for calibration that you contact Chad.

Thanks again!

I have an opening around NYC on Sunday March 11th if anyone is interested in audio and/or video calibration of their home theater. Please PM me or fill out this form on my website www.accucalhd.com/pricing-quote.htm.

I will be available for calibrations in the San Francisco Bay Area from 3/19 to 3/24, please PM to book your time.

Any recommendations for calibrations in Louisville, KY? Thanks!

Any recommendations for calibrations in Louisville, KY? Thanks!
I'll be calibrating in Florence on Saturday the 10th and could come to Louisville that evening or Sunday.

Let me know.


Ken Whitcomb
317-696-5174

Just bought a Samsung 55D6900WF that I would like to have calibrated. BB offered the service at $250 but I'm not sure they are "experts" at calibration. I would rather give the money to someone who specializes in the field.

I'm in southern MD. 40 miles east of DC. 25 miles south of Annapolis.

Just bought a Samsung 55D6900WF that I would like to have calibrated. BB offered the service at $250 but I'm not sure they are "experts" at calibration. I would rather give the money to someone who specializes in the field.

I'm in southern MD. 40 miles east of DC. 25 miles south of Annapolis.

PM sent

Hi, I'm looking for calibrators in NOVA area for my mits wd82740 tv. Anyone??

Are there any calibrators in the Pensacola, FL (Northwest FL) region?


I have a Samsung PN64D7000. Would like a day and night calibration, if possible (calibrate during sunset and once sun goes down?).

[EDIT]: I have been contacted by Don @ Precision Video Calibrations (http://www.pvcalibrations.com/). If anyone is in the area, contact him regarding a calibration run!

Looking to get my new Samsung PN64D800 calibrated in Alpharetta, GA, just north of Atlanta. Any ISF Certified Techs in this area?

THanks,

Dave

Looking to get my new Samsung PN64D800 calibrated in Alpharetta, GA, just north of Atlanta. Any ISF Certified Techs in this area?

THanks,

Dave

PM sent

Hey Guys:

Looking to get my Samsung PN59D7000 calibrated here in the next couple of weeks. I've already logged a good 250 hours + display time. I'm in the Dallas, TX area.

1) Any highly recommended touring calibrators coming this way anytime soon?

Or in lieu of a touring calibrator;

2) Can anyone recommend a local calibrator or company whom they'd recommend?

Thanks in advance.

Hey Guys:

Looking to get my Samsung PN59D7000 calibrated here in the next couple of weeks. I've already logged a good 250 hours + display time. I'm in the Dallas, TX area.

1) Any highly recommended touring calibrators coming this way anytime soon?

Or in lieu of a touring calibrator;

2) Can anyone recommend a local calibrator or company whom they'd recommend?

Thanks in advance.

I will be in the area in April. It will be worth the wait. ;)

Fill out this form if you want me to drop by. www.accucalhd.com/pricing-quote.htm

Is there a general amount of time/hours you should have on your display before having it calibrated? I have the Sharp lc 70le735u

Thanks

I will be in Arkansas, Louisiana, Oklahoma and Texas in mid April. Please use the form below if you wish for me to work on your home theater's audio and/or video.
www.accucalhd.com/pricing-quote.htm

Looking to fit into someone's tour schedule end of April/early May. I'm in south central PA - 1.5 hours north of Baltimore...1.5 hours west of Philly. I own an Elite Pro-60X5FD.

Looking to fit into someone's tour schedule end of April/early May. I'm in south central PA - 1.5 hours north of Baltimore...1.5 hours west of Philly. I own an Elite Pro-60X5FD.

PM sent

Ken Whitcomb

Any of the Calibrators going to be in the Oklahoma City Area in the next few months April thru August, 2012 ? I have a Sharp Elite 70X5 I was wanting to get done.
Thanks

Anybody in Vegas?

Southwest Ohio here. Anyone in the area?

Any of the Calibrators going to be in the Oklahoma City Area in the next few months April thru August, 2012 ? I have a Sharp Elite 70X5 I was wanting to get done.
Thanks

PM sent

Just got the Sharp LC-70LE745U and would like to get it calibrated. I'm in Baltimore, MD. Anyone have recommendations for someone please PM me.

Kevin Miller will be in Orlando FL from May 3 to May 6 offering calibrations for anyone interested. Please PM for more information. Need a minimum of 6 calibrations and spaces should go quick

I just want to throw a quick plug out for Chad B. He fit me into his already tight schedule and did a calibration on my Sony HW30. Chad was very professional, friendly, and took his time explaining everything he was doing and answering a lot of my dumb questions along the way :D

Based on the overall experience and price he charged I would highly recommend him.

Anyone going to be in Dallas Tx anytime soon? I have a krp-500m that has red tint and needs full isf!

Thanks

I will be in the Palm Beach, Ft. Lauderdale and Miami areas this weekend April 14-16 for anyone requiring a calibration

I have time slots available for the Philadelphia and Trenton NJ area on April 26-27.

Kevin Miller will be in Orlando FL from May 3 to May 6 offering calibrations for anyone interested. Please PM for more information. Need a minimum of 6 calibrations and spaces should go quick

Just a reminder everyone that Kevin Miller is.coming to Central Florida. If you are considering please pm me asap

I purchased a Sony HX929 that I'm looking to get calibrated. I happen to live in central Vermont. Is anyone is planning a north east tour this summer/fall?

I purchased a Sony HX929 that I'm looking to get calibrated. I happen to live in central Vermont. Is anyone is planning a north east tour this summer/fall?

I can possibly be there in June depending on how far north it is.

Looking for Calibration for 3 TV's
- Panasonic VT25 TC P250VT25
- Sony Bravia KDL 52EX700
- Samsung 8000 (soon to be purchased)

Any recommendations?
Please PM me

thanks,


Ty:cool:

Looking for Calibration for 3 TV's
- Panasonic VT25 TC P250VT25
- Sony Bravia KDL 52EX700
- Samsung 8000 (soon to be purchased)

Any recommendations?
Please PM me

thanks,

Ty:cool:

Where r u located

Woodbury Community

Jeffrey/ Bryan

Woodbury Community

Jeffrey/ Bryan

I meant city state

Irvine, california

Irvine, california

Don't know any on the west coast but Kevin Miller and d-nice do travel to the wc

Looking for Calibration for 3 TV's
- Panasonic VT25 TC P250VT25
- Sony Bravia KDL 52EX700
- Samsung 8000 (soon to be purchased)

Any recommendations?
Please PM me

thanks,


Ty:cool:

Here is a list that may help you out:

THX Certified Video Calibrator (http://www.thxvideotech.com/forum/showthread.php?542-THX-Certified-Video-Calibrator)

Hope this helps
RayJr

Rayjr.
thanks much...

I am in Staten Island, New York. Looking for info on BenQ w6000 isf calibration.

Hello folks:

Well, due to unfortunate circumstances, and after a month of waiting, I had to cancel my professional calibration for the end of April.

I'm looking to get my Samsung PN59D7000 calibrated, and I want it done ASA-F'n-P, as in within the next couple of weeks (literally, waiting longer than that is an impossibility.)

I'm looking for a touring calibrator, or a highly-recommended local calibrator in the Dallas, TX area.

Thanks.

Hello folks:

Well, due to unfortunate circumstances, and after a month of waiting, I had to cancel my professional calibration for the end of April.

I'm looking to get my Samsung PN59D7000 calibrated, and I want it done ASA-F'n-P, as in within the next couple of weeks (literally, waiting longer than that is an impossibility.)

I'm looking for a touring calibrator, or a highly-recommended local calibrator in the Dallas, TX area.

Thanks.

Um.. next couple of week is the End of April..

Um.. next couple of week is the End of April..

Um...yes, I know that. That's when I was told the appointment would happen, but the calibrator won't be making the trip, thus my posting here, but, no worries, I've already booked someone for this Saturday.

Thanks very much.

I am in Staten Island, New York. Looking for info on BenQ w6000 isf calibration.

I could make it at the end of this month. :)

Still looking for a calibrator for northern Illinois, Panny GT30.

Any reputable calibrators in the Toronto, Ontario area for a Sharp 80" 844?

devious996TT i just pm u!!

Anyone going to be in Dallas Tx anytime soon? I have a krp-500m that has red tint and needs full isf!

Thanks


Hey neo: I just posted a review (http://www.avsforum.com/avs-vb/showthread.php?p=21934838#post21934838) for Don Krasen, President of Krystal Clear Audio - Video in Dallas, TX. He did a great job. Highly recommend him.

Looking for a calibrator in Northern nj....

PM me.

Anyone near South Jersey? 20 mins outside Philly. I have a new JVC RS55 that needs calibration. Thanks.

Anyone near South Jersey? 20 mins outside Philly. I have a new JVC RS55 that needs calibration. Thanks.

I will be there in June.

www.accucalhd.com/pricing.htm

Panasonic P60ST50 in Syracuse, NY looking for a reputable calibrator. I see in another forum Marcus Lebeau listed as servicing this area. Anyone deal with him?

Any calibrators in Syracuse available? Chad B - are you touring just in the NY city area?

Thanks in advance.

Panasonic P60ST50 in Syracuse, NY looking for a reputable calibrator. I see in another forum Marcus Lebeau listed as servicing this area. Anyone deal with him?

Any calibrators in Syracuse available? Chad B - are you touring just in the NY city area?

Thanks in advance.

Yes, unfortunately it was just NYC and Long Island.

Yes, unfortunately it was just NYC and Long Island.

Thanks anyway Chad B

Anyone with advice on Syracuse calibrator??

is there anyone present and/or touring the Chicago area in the near future. Possibly some time in June?

I have a 50" Panasonic GT50
Please PM me.

I live in Charlotte, NC and have a 55" Samsung (LN52A550P3FXZA) and had it calibrated by best buy right after I purchased it. I was never totally happy with the picture quality, especially the blacks, an I am considering new tv. Wondering if Calibration by a real PRO would help that much or is my tv just old compared to what is out now. I bought thinking is was 120hz but it is only 60hz. See below for other specs.

Display Type LCD TV
Diagonal Screen Size 52 in
Viewable Size 52 in
Aspect Ratio 16:9
Max Resolution 1920 x 1080
Contrast Ratio 30,000:1
Brightness 500 cd/m2
Response Time 5 ms

I live and work in the Portland, OR area and while most of my calibration focus is geared towards providing more accurate reviews for my readers, I am available to do calibrations in the area. Additional details can be found at http://referencehometheater.com/.

Hey guys, I'm thinking of having my new LG 55LM7600 calibrated as I'm very new to this, and I live in Manhattan (SoHo area). I also picked up a Yamaha YSP-2200 that I'm considering having calibrated as well. Any recommendations? Or, PM me if you are interested so we can talk.

Thanks,

`John

is there anyone present and/or touring the Chicago area in the near future. Possibly some time in June?

I have a 50" Panasonic GT50
Please PM me.

PM sent


Ken Whitcomb

Doug Blackburn informed me he is moving, which leaves quite a dearth in Colorado. I don't know anyone else locally I can trust.

Any suggestions for the Denver area? I have a Panasonic TCP-58V10 that I never got professionally calibrated.

Doug Blackburn informed me he is moving, which leaves quite a dearth in Colorado. I don't know anyone else locally I can trust.

Any suggestions for the Denver area? I have a Panasonic TCP-58V10 that I never got professionally calibrated.

G. Alan Brown at Cinema Quest inc (http://www.cinemaquestinc.com/). - THX & ISF certified calibrator.

Still looking for a calibrator in upstate NY (Syracuse). 60ST50. This beast needs some help - a nice picture has to be in there somewhere - i cant get it dialed in! With the Disney WOW disc, I cant get the WTW even close to ideal....need a calibrator.

G. Alan Brown at Cinema Quest inc (http://www.cinemaquestinc.com/). - THX & ISF certified calibrator.

That's odd. I called Cinema Quest, and they tried to refer me to Doug Blackburn before I told them he's moving. Now I'm really confused.

Edit: I called again. I guess it was Alan Brown I spoke with at Cinema Quest. Apparently, he decided a while back that from now on he can only afford to do calibrations on his own customers' displays. So Doug and Alan are both a no-go.

Has anyone in the Denver area ever had any experience with a calibration by ListenUp?

Well, I am not too far in Kansas.

I'm curious if anyone has a summertime tour for the SF Bay Area. Things should be set up and ready here by then.

I'm going to be moving there this summer from Colorado. Can't setup any appointment dates yet, as we don't know exactly when the move will happen yet (have to sell the house here and find something there), but we are coming. If you don't get what you need elsewhere, keep me in mind.

I'm curious if anyone has a summertime tour for the SF Bay Area. Things should be set up and ready here by then.

I am here already. Look me up -

b

Call Robert Busch of Busch Home Theater.
707-573-9170
buschhometheater@comcast.net

Since Doug is leaving Colorado, effectively leaving a hole, I will expand my coverage area to cover east of the Rockies. If anyone is needing a THX calibration, feel free to give me a shout. My calibration equipment list can be accessed via the link in my signature.

I already travel to CO. I will be there tomorrow for example.

Any recommendations for a calibrator or anyone visiting the Miami, FL area in the next couple of months? I have a Samsung PN59D7000 desperately in need of a calibration. The room is pretty bright and I can't get it to look right.


Thanks,

Rudy

Any recommendations for a calibrator or anyone visiting the Miami, FL area in the next couple of months? I have a Samsung PN59D7000 desperately in need of a calibration. The room is pretty bright and I can't get it to look right.


Thanks,

Rudy

Alexander Cuervo - THX Level II Video Calibration
Axiom Programming and Design Partners LLC
12120 SW 97 Terrace
Miami, FL 33186 USA
Tel. 786 8979708

I am looking for a professional calibrator in the Philadelphia area. I am located in Bucks County just outside Philly.

I recently purchased a 50" GT50 Plasma and looking to get the most out of this great TV.

I am looking for a professional calibrator in the Philadelphia area. I am located in Bucks County just outside Philly.

I recently purchased a 50" GT50 Plasma and looking to get the most out of this great TV.

PM sent.