I'm trying buy any of the service manuals for the new Panasonic Models to get that info. but they are not available yet.

Thanks. We appreciate your efforts! :)

I can't find the access code here.
Can someone help me with instructions on how to access it?
The tech was just here.
I just want to monitor the bulb life!
Thanks in advance

Okay, based on memory (this is my third Panny), I got into my service menu. But where are the h-width and v-width options? All I need is to up the h-width by a bit. This was easy on the last Panny I owned. There has to be a way this can be done, doesn't there?

Unfortunately Panasonic removed the option to adjust overscan on the 50U/500U and 6U/60U/600U Models. :mad: :mad: :mad:



Thanks. We appreciate your efforts! :)

You're Welcome. :)



I can't find the access code here.
Can someone help me with instructions on how to access it?
The tech was just here.
I just want to monitor the bulb life!
Thanks in advance


Click on my signature. :)

Unfortunately Panasonic removed the option to adjust overscan on the 50U/500U and 6U/60U/600U Models. :mad: :mad: :mad:



Thanks for the hideously disappointing info. BruZZi (but genuine thanks, as it's nice to know and you've always been a great help around these here parts). So have you found a workaround yet? I'm sure there must be genuine overscan/underscan issues with the TV and that there must be a way to adjust for them. Or would they just replace the entire panel?

So, could anyone let me know if these black bars on the side when I play video games with the Wii or PS2 will lead to uneven aging? How worried should I be about this? Should I stick exclusively to the 360 or PS3? If I turn the settings way down would it eliminate the problem? Like turn "Picture" and "sharpness" down to -10 when playing these games? Or could it still lead to uneven aging. Between my husband, myself and my brother who's currently living with us, these gaming machines are probably on 12 hours a day.

If someone can PM me how to access the service menu on a Westy LVM-37w1, I'd appreciate it.

I have the Vizio vm models they are 32 ,37 and 42 inch models from wall mart. I was wondering if on the 2 smaller there was any way to turn on pip? Am I able to get to the factory service menu on these brands tried bruzzi's method on his site does not work any info would be appreciated??? :eek:

BruZZi's site has service menu access instructions for the pz700u, but not factory reset. I tried the reset instructions for the pz600u, and it does cycle through the self-check mode, but unlike the the pz600u disconnecting the AC plug from the wall outlet does not reset the panel. Anyone know how to do this?


The info was added. Check the Panasonic FAQ. :)

Thanks for the hideously disappointing info. BruZZi (but genuine thanks, as it's nice to know and you've always been a great help around these here parts).
I've been very busy in the last few months so sorry if I can't answer questions promptly. :)


So have you found a workaround yet? I'm sure there must be genuine overscan/underscan issues with the TV and that there must be a way to adjust for them. Or would they just replace the entire panel?

I haven't find a way to do it.

So, could anyone let me know if these black bars on the side when I play video games with the Wii or PS2 will lead to uneven aging? How worried should I be about this? Should I stick exclusively to the 360 or PS3? If I turn the settings way down would it eliminate the problem? Like turn "Picture" and "sharpness" down to -10 when playing these games? Or could it still lead to uneven aging. Between my husband, myself and my brother who's currently living with us, these gaming machines are probably on 12 hours a day.

Turning Picture (Contrast) and Brightness will help a lot. The black bars will be (eventually) an issue only if you don't watch a good amount of programming that fill the whole screen.

The info was added. Check the Panasonic FAQ. :)

I looked at your site and I only see new info added to the Panasonic commercial thread for the 9UK and 10uk. No new info for the 700u in the consumer thread. Do the factory reset instructions for the commercial models also apply to the consumer models?

I looked at your site and I only see new info added to the Panasonic commercial thread for the 9UK and 10uk. No new info for the 700u in the consumer thread. Do the factory reset instructions for the commercial models also apply to the consumer models?

Try clearing your browser's cache as the info is there:

http://www.bruzziforum.com/vbf/showthread.php?t=21


:)

Anyone have the service menu/code for an Insignia Model: IS-TVHD30?

much thanks!
Were you ever able to get into the SM on IS-TVHD30?

Try clearing your browser's cache as the info is there:

http://www.bruzziforum.com/vbf/showthread.php?t=21


:)

Thanks. I did see that info but your post date is 11-28-06 so I wasn't sure if it was current.

hi guys can anyone help me with the services menu for a WESTINGHOUSE SK-32H240S would be greatly appreciated.JUst got this one and it has no way to adjust the color rgb menu properly.

hi guys can anyone help me with the services menu for a WESTINGHOUSE SK-32H240S would be greatly appreciated.JUst got this one and it has no way to adjust the color rgb menu properly.

Did you try the codes already posted on my site???

.

Does anyone have the SM access code for Hitachi xxVG825 ?

Thanks in advance. :-)

Service menu on Magnavox 42MF437B - thanks ! Tried the Philips/Magnavox but none of them worked.

Myself and many others are looking for the SC for the Westinghouse TX Series ( TX-42F430S, TX-47F430S ).

Older methods (http://www.bruzziforum.com/vbf/showthread.php?t=53) do not work...

Help is appreciated!
xnappo

Could someone please send/PM me the info for the Service Menu for an Hisense pdp 4233.

Thanks

John

Hey Thanks A Lot Bro!!!!!!!!!!

Does anyone have the SM access code for Hitachi xxVG825 ?

Thanks in advance :-)

Use buttons on TV:

[Source] + [Vol-] + [Ch-] simultaneously

[Menu] to exit


Cheers!
THANK YOU!

It's been a while since I'd look through the thread cause I'd given up hope.
I REALLY appreciate it!

CFC

Does anyone have the SM access code for Hitachi xxVG825 ?
Thanks in advance. :-)

Did you try the codes posted on my website???


Service menu on Magnavox 42MF437B - thanks ! Tried the Philips/Magnavox but none of them worked.
Try the codes for the Funai TVs. I don't know who makes the LCDs for Sylvania so you might try the other Brands.


Myself and many others are looking for the SC for the Westinghouse TX Series ( TX-42F430S, TX-47F430S ).
Older methods (http://www.bruzziforum.com/vbf/showthread.php?t=53) do not work...Help is appreciated!
xnappo
Try the Codes for other Brands.



Could someone please send/PM me the info for the Service Menu for an Hisense pdp 4233.Thanks
John
That's a tough one to find. :(


Hey Thanks A Lot Bro!!!!!!!!!!
You're Welcome. :)

Quote:"Originally Posted by Gellidius
Does anyone have the SM access code for Hitachi xxVG825 ?
Thanks in advance. :-)



Did you try the codes posted on my website???"

I was asking for a friend of mine so i could not try the different codes myself.
He tried and found that the first one on the Hitachi page works ok.

Thanks Bruzzi

Great. :)

yes i tryed the codes you have suggested nada...have returned it because it keeps turning off on its own..got a TOSHIBA 37"HL67 LCD i have not found the code to open the services menu on it yet and have tryed you suggetions.Do you have any other info on this one? thanks

I was able to use BruZZi's method to access the Service Menu in my Vizio VP50 plasma. Thanks!

But I'm wondering -- is there some place in the Service Menu to find out how many hours of operation I have so far (for break-in purposes)? It sounds like other brands of plasmas do that, but can I find it on a Vizio?

Hello, looking to get into the service menu for the following displays. Thanks!

Sony KDF-E42A10

Polaroid TLA-01511C

I'm trying to find the service codes for Magnavox 42MF437B.

I see someone else asked, and so far I've tried the Magnavox/Phillips codes, and the Funai tv and nothing works.

Hi Bruzzi,

I'm looking for the service manual for the Panasonic TH-50PX75U plasma. If not available, the following service manuals would be OK:

TH-42PX75U
TH-50PX6U
TH-50PX50U

Thanks a lot,

R

I would like to get service menu access codes, navigation info, decoder ring info, etc. for:

Sharp LC-32D40U

Sony KV-36XBR450

yes i tryed the codes you have suggested nada...have returned it because it keeps turning off on its own..got a TOSHIBA 37"HL67 LCD i have not found the code to open the services menu on it yet and have tryed you suggetions. Do you have any other info on this one? thanks

Orion makes a lot TVs for Toshiba (and some for Sharp). So you might try their codes.



I was able to use BruZZi's method to access the Service Menu in my Vizio VP50 plasma. Thanks!

But I'm wondering -- is there some place in the Service Menu to find out how many hours of operation I have so far (for break-in purposes)? It sounds like other brands of plasmas do that, but can I find it on a Vizio?

Try asking this question at the Plasma Forum. :)


Hello, looking to get into the service menu for the following displays. Thanks!

Sony KDF-E42A10

Polaroid TLA-01511C

Did you try the codes posted on my Website???


I'm trying to find the service codes for Magnavox 42MF437B.

I see someone else asked, and so far I've tried the Magnavox/Phillips codes, and the Funai tv and nothing works.

Don't know who makes LCDs for Magnavox. Try the codes for other Brands.


Hi Bruzzi,

I'm looking for the service manual for the Panasonic TH-50PX75U plasma. If not available, the following service manuals would be OK:

TH-42PX75U
TH-50PX6U
TH-50PX50U

Thanks a lot,

R

I have the SM for the TH-50PZ750U. Is that ok???


I would like to get service menu access codes, navigation info, decoder ring info, etc. for:

Sharp LC-32D40U

Sony KV-36XBR450

Check my Website for the Codes. All other info try the Forums. :)

I have the SM for the TH-50PZ750U. Is that ok???


Yes, that's OK, thank you. How can I get it?

R

Yes, that's OK, thank you. How can I get it?

R

I'm uploading a copy to a free online host. I'll post the link via PM in few minutes. :)

Yes, that's OK, thank you. How can I get it?

R


Check your PM. :)

BruZZi , How come not much sony on the bruzzi forum ???

Did you try the codes posted on my Website???
none of them work for the TLA-01511c

BruZZi , How come not much sony on the bruzzi forum ???

If you mean access codes...

That's because Sony uses the first two codes for most of their TVs. :)



none of them work for the TLA-01511c

Many Polaroid TVs are made by Prima (Xoceco).

Maybe that model uses a different code or It's manufactured by a different Brand. Try the other codes (For Sharp, Orion, Proview, etc) posted on my Website.

BruZZi , How come not much sony on the bruzzi forum ???

If you mean access codes...

That's because Sony uses the first two codes for most of their TVs. :)



none of them work for the TLA-01511c

Many Polaroid TVs are made by Prima (Xoceco).

Maybe your model uses a different code or It's manufactured by a different Brand. Try the other codes (For Sharp, Orion, Proview, etc) posted on my Website.

Ok...

I'm uploading a copy to a free online host. I'll post the link via PM in few minutes. :)

might i get a link via pm also (750u sm)? :)
thanks!

Hi,

I'm looking for the SACs for a westinghouse LVM-37w1. I tried the ones posted in the guide but #2 didn't work (pressing input + volume down prevents the user from turning on the TV). For #1 I don't see a display button on the remote. Is there something I'm missing here?

RIght now the white levels are waaaaay to high for Component output and I'd like to adjust it.

Thanks,
Kyle

Hi,

I'm looking for the SACs for a westinghouse LVM-37w1. I tried the ones posted in the guide but #2 didn't work (pressing input + volume down prevents the user from turning on the TV). For #1 I don't see a display button on the remote. Is there something I'm missing here?

Thanks,
Kyle

Unfortunately the codes posted work on many but NOT ALL Westinghouse TVs. :(

If you do this trick on channels witout signal, you get a menu with voices such as vert and horiz offset, digital adjust, evaluation... instead of the color regolation scheme. But "under" the menu window channels changes quickly so you dont have time to change settings and to exactly understand on wich channel you are (with channels i mean tv,av, scart, etc).

Have you managed to use that menu??

I've been looking for service codes for my Acer AT3220A for a long time, and have never found any. Figured I'd give this one a try even though it's for a different model.

What do you know, it works! Too bad I have the same issue, where no matter the input source the menu just won't stay up long enough to actually use it. Anyone that can use this service menu actually get it to stay on screen for more than 1 second?

P.S. NTSC AT3220A from Canada

I've been combing the web for the service mode procedure for a Symphonic WF-2702. I've tried the codes in the section, but none work. (That or I'm missing the trick to getting them to work.) Got a slight overscan and pincushion issue I need to fix.

Can someone send me the service menu code for a Vizio LCD (42 and 47'')? I haven't been able to get on the Bruzzi website because they are "testing some functionality."

Thanks!

Hi there,

Great job pulling together so many service menu access codes! I've never before seen such a long list.

Wondering if anyone knows of the service menu access code for the Prima PH-4237P. I've tried the codes on BruZZi's site, but they don't work (probably for LCDs etc...)

Thanks!

I'm trying to find out how to access the service menu on a Legend LEP4218.

I used the service menu code on my LVM-37W1, got into service menu ok and made adjustments to RGB on Colour 1 only. Hit factory reset to get out of the service menu and everything seemed to work ok, but instead of just going to a blank screen on inputs when there's no signal, it flashes black and white alternately now. Still seems to work, when signal from source comes on flashing stops and picture comes in, just wondering if I wrecked the TV somehow? :p I didn't want to screw with the EEPROM or anything else, as I don't know what it does. Anyone know?

I am trying to use my Sony KLV-S23A10, but none of the Sony codes on my list seem to work. Can anyone help?

Can someone send me the service menu code for a Vizio LCD (42 and 47'')? I haven't been able to get on the Bruzzi website because they are "testing some functionality."
Thanks!
Back Online. :)

Hi there,
Great job pulling together so many service menu access codes! I've never before seen such a long list.
To be honest, I'm surprised myself on how much info I was able to get. :)

Wondering if anyone knows of the service menu access code for the Prima PH-4237P. I've tried the codes on BruZZi's site, but they don't work (probably for LCDs etc...)
Thanks!

See if I can find more codes for Prima. :)

I'm trying to find out how to access the service menu on a Legend LEP4218.

Nothing yet for Legend TVs. :(


I am trying to use my Sony KLV-S23A10, but none of the Sony codes on my list seem to work. Can anyone help?

If none of the codes posted on my website work, try asking at www.agoraquest.com (It's a dedicated forum for Sony products).

I need code for a Symphonic WF32L6

THX

Videoseven/V7 KM-4011, accidently enter the service menu using my DCT remote but i couldn't repeat it and now it's eating away at me

Nevermind discovered it just similar to the most common Konka code in Bruzzi forum.

Does anyone have the service menu code for the Hyundai E-series LCD HDTVs ?
eg: E425D / E465D / E426D / E466D
I tried all codes found in the Hyundai section of the bruzziforum
but none worked :-(
BruZZi, can you help ?

I have the Westinghouse 32w3 model and I'm looking for a way to get into the service menu. I actually already called Westinghouse and they said "sir, I'm sorry to inform you that I cannot give out how to get into the service menu due to our policy" so you guys are my last hope. not having the color decoder right is driving me absolutely crazy; I can't even play my Xbox 360 on it right now, knowing it isn't right. :(

can anyone help me get into the service menu so I can fix the color?

Anyone figure out how to get into the Vizio VX37L? The steps listed on Bruzzi do not work and I've tried all three sets of steps.

This is a request for accessing the Trutech service menu. I would like to try and get 1:1 pixel mapping across the VGA, as right now everything scales, even on VGA input. Plus, colors over component look washed out. Trutech, made by Alco Electronics, has terrible customer suppport online. If somebody knows compatible service menu codes, please let me know.

Specific model is the Trutech PLV16320. Any help would be appreciated.

I need the sequence to access the service menu for a TH-42PD50U.

Thanks.

I have a tech coming out but accessed the sound(stv825x) menu option and some how all the values got reset to zero. Every category with the "sound" que seems to have different settings.

Does someone have a guide of sorts that shows what I can reset the various choices at?

When I hit "Reset" in the menu it does not do anything and it only restarts setting time, checking for channels and what part of the country i live in.

This all started by the way with a power outage and the sound was stuck on zero and when I would increase the sound it would actually back down on its own to zero.

Overall, the set works and the sound works but I am guessing that something went wrong with zero settings and I do notice that when I "game on 360 with headphones, the stero aspect is gone - right ear only. Not so, when watching tv with headphones.

Any ideas?

Z in Chicago

The 991 code works on my Hannspree xV37 but I am wondering if there might be any other service menus? Or any known method to put the tv into firmware update mode?

Cannot register on the bruzzi website !! Is there a special requirement?

Looking for the Westinghouse W4207 code. I tried the second Westinghouse code on your website w/ the input and vol- buttons, but nothing happens when I press the power button. For the first code, which button is the display button?

i need the service menu for the viewsonic VA1912w
Thanx and sorry if this cant be porsted here, i dont know the rules

i need the service menu for the viewsonic VA1912w
Thanx and sorry if this cant be porsted here, i dont know the rules

Have you gone to the 1st page and click on the link?? I know there is service menu in that link for Viewsonic

Can someone Private Message me the service code to Westinghouse LTV-32w6? I am trying to fix the overscan issue on this TV.

Thank you so much!

Evan

Anyone know how to reset the service menu settings on the panasonic
pz700u?

I already know the access code for my Akai pt5598hdx (mute-1-8-3) but once I get there I have no idea how to save the work I've done. If anybody could help that would be great. I think my tv is reaching its demise. Thanks.

I'm looking for the service menu code for Sylvania model SST413 so I can fix the overscan and center the image (problems I've had since I got the thing eight years ago). None of the ones on bruzziforum worked. Was there some other step I need to take before entering the codes?

I am looking for the service menu codes to get into the Akai PDP42Z5TA Plasma. Tried the ones on the forum but did not work.

I am looking for the service menu code for NEC 50XR5.

Anyone know?

"UPDATE" I CURRENTLY HAD A WESTINGHOUSE REP AT MY HOUSE FOR A FIRMWARE UPGRADE AND HE SHOWED ME THE SERVICE MENU ACCESS CODE, I WILL NOT POST IT BUT I WILL SEND PM's BACK TO INQUIRING MINDS WHO WOULD LIKE TO KNOW IT, THIS IS FOR THE 27W7

Myself and many others are looking for the SC for the Westinghouse TX Series ( TX-42F430S, TX-47F430S ).

Older methods (http://www.bruzziforum.com/vbf/showthread.php?t=53) do not work...

Help is appreciated!
xnappo

I second this request.

TX-42 owner here.

Has anyone been able to get to the service menue on the vizio gv42l yet?
I have tried the 3 ways posted on the bruzzi site and it doen not work,
remote version just takes me to the channel,and the other 2 methods
while pressing the listed buttons the TV will not turn back on,
so could some one PM me with the proper method please.
Thank you..

I'm also looking for the service code for the gv42l. If someone has the service code to that tv can you please PM it to me. Thanks!

Does anyone have the service menu code for the Hyundai E-series LCD HDTVs ?
eg: E425D / E465D / E426D / E466D
I tried all codes found in the Hyundai section of the bruzziforum
but none worked :-(
BruZZi, can you help ?

im in the same boat, anyone know how to make those codes work? :)

Sorry if im being an idiot but how do you enter MENU 991? Press and hold menu? I think i'm doing it right. Does anyone have any other way of getting into the service menu?

Many Thanks
Sam

Hello can you help me im searching for my Samsung LE32R82BX Sercice menu code please help some one :( im having problems whit PS3 HDMI overscan problem

Hi all, new owner here. BruZZi's site is down and I need to check the hours on my 50PX75U. How do I get into and then find the hour meter in the SM.

Thanks to sigma957 in the PX75 owners thread for answering the above question. This forum has been a great help in purchasing my first HDTV.
Thanks again, G.W.

Viewsonic 4280P service menu code?

Anyone knows the service menu code for a Infocus IN78?
Thanks

I know this is an old request, but could anyone please PM me with the service menu codes for the Sony KDL-46XBR2?

Bruzzi's site is down for a few weeks, and I can't find the codes anywhere else.

Thanks.

Hi everybody

I need the service menu codes for Digistar LCD 2710 TV.
I was randomly pushing the keys on the remote (HYF-35T) and I opened the service menu but I pushed menu button and I lost it.:rolleyes:
I am trying to find it again but I can not!
I'l appreciate your help.

Thanks in advance,

Im looking for the code for the Westinghouse LTV-27w2 .... also quick question if anyone has normal settings for this particular tv set up to the xbox360 please PM me that too, for some reason when i play sports games for instance nhl08 the ice is too bright but no settings will get it just right, it either too bright or too dark

Does anybody know when the forum is active again?

Dimitri

Im looking for the code for the Westinghouse LTV-27w2 ....

I'm interested in the same service menu code. I'd appreciate it if someone could PM me with the info.

HELP!!!

I had no problem getting into the service menues on a 27" Panasonic CT-27SX11E but now I can't get out of service mode. I tried unplugging the set, tuning to channel 124, no dice.

This is a friends TV and I will look like a ASS if I can't get the SM code off the freakin' screen. Please private message me and I will give you my cellphone so you can call me and walk me through it.

Thanks,

Could someone please PM the service code for NEC 50XR5?

The forum is inaccessible so I can't find out anymore.

Can Someone send me the service menu code for this TV. I have the convergence menu code, and I thought I had the right service menu one, but I can't get it to work.

Hello im new to the forums, I own 32w6 westinghouse need service menu code..Im sure as many of yous have been pounding your heads into the keyboard like me looking for it, can't seem to find it..I hope someone could help me or pm it:)

Hi all, new owner here. BruZZi's site is down and I need to check the hours on my 50PX75U. How do I get into and then find the hour meter in the SM.

Thanks to sigma957 in the PX75 owners thread for answering the above question. This forum has been a great help in purchasing my first HDTV.
Thanks again, G.W.

err can you post the answer :) search results turn this post up but i don't see the actual answer :) tia.

anyone:confused: service menu code 32w6 westinghouse it seems to be like forbidden fruit! pm if someone has info plz

Can someone please help me get into the service menu for the Insignia IS-TV040927?

Any help here!

I recently purchased a Westinghouse SK-19H210S TV and I'd like to be PM'ed with the service menu directions, if possible. I figured out how to get test patterns to display, but that was about it. I'm having a problem with overscan on my Component and HDMI inputs for this TV and I'd like to permanently resolve the issue.

I recently purchased a Westinghouse SK-19H210S TV and I'd like to be PM'ed with the service menu directions, if possible. I figured out how to get test patterns to display, but that was about it. I'm having a problem with overscan on my Component and HDMI inputs for this TV and I'd like to permanently resolve the issue.
good luck nobody has pm'd me nor helped:mad:

Hi all,

I am looking for detailled code from service manu for a Plasma Fujitsu P42VHA31.

lcaufrie@mail.mobistar.be

thanks for your help

Hello all.

I'm having some SERIOUS probs with my girlfriend's mother's refurbed Sanyo DS-24425-02.

Originally, I thought the problem may lie in the onboard tuner, as the initial issue was with the TV accepting a split from a cable box, and the auto-shut-off feature. However, after pulling the RF cable line and replacing the screw-type RF connector with a push-type adaptor and adding an inline booster, the problem persisted.

So then i started messing around in the service menu. Using the service manual as a guide, i reset all values outlined in the "if eeprom is replaced" section...they were mostly wrong at the outset.

and then something very strange happened. Halfway through this process, the onscreen display quit, the TV display lost about 1/2 brightness, and now the set is stuck in some half-mode b/w service and standard operation. Any attempt to restart the service mode leaves me able to adjust certain features, but there is no onscreen display, either in "service" or "standard" modes.

It's obvious I need to erase/flash the eeprom (IC802), but I cannot find a SINGLE method on how to do this, save for a few mentions of unplugging the set from AC over 4 hours, which does NOTHING.

Do I need to replace the IC? Is there a way to reset the eeproms from outside the box? Is the TV finished?


HELP!!!!!

Please write me at jeffreyp@ocularnutrition.ca as opposed to PM's if you please. However, PM's will do in a pinch, of course...

I need the code for Westinghouse W33001. Got a bad overscan problem. chouse1@kc.rr.com Thanks.

I recently bought a SIM2 D80 and would like to do a calibration on it but so far I've been unable to obtain the service menu access code. Please can someone post or PM me the SIM2 codes.

Many thanks.

I need Prima service menu codes. Menu 8+8+8+8 did not work for me. Any help would be very much appreciated!

Hi,

Does anyone know the service menu code for KDS60R2000
that would be great.
Thanks in advance

Not a valid model number in the US, but Sony sets generally use the sequence Dislay, 5, Vol+, Power from stby. Unless you have the rest of the remote codes and know exactly what you are doing in the SM I would recommend staying out of it.

BruzziForum.com is running again.

.

So what happened?

I need service menu codes to adjust overscan and/or horizontal and vertical position for a TH-58PZ700U. I haven't seen anything that indicates that these don't exist for the 700-series Panny plasmas.

So what happened?

Long story. :D

I need service menu codes to adjust overscan and/or horizontal and vertical position for a TH-58PZ700U. I haven't seen anything that indicates that these don't exist for the 700-series Panny plasmas.

Panasonic removed the option to adjust overscan on the Consumer Plasmas since their 8th Generation Models. :mad::mad::mad:

.

Panasonic removed the option to adjust overscan on the Consumer Plasmas since their 8th Generation Models. :mad::mad::mad:

.

Well, I just really need to center the picture. Are those adjustments gone too? I'm actually surprised that the picture is off-center with my HDMI sources, especially if there's no service menu adjustment. I hate it when letterbox bars are taller on the top than the bottom. :mad: It seems like it'd be spot-on through HDMI (like it is with my TH-50PX60U). I wonder if this is something that could be addressed with a firmware update...

lcaillo,

If that was for me thanks,and I will stay out of it,(way too complex for me)
it is needed for the guy that will be giving my set a pro calibration and to re-align the SXRD chips and fix my frame geometry problem.

thanks once again

lcaillo,

If that was for me thanks,and I will stay out of it,(way too complex for me)
it is needed for the guy that will be giving my set a pro calibration and to re-align the SXRD chips and fix my frame geometry problem.

thanks once again

Any calibration specialist who does not have the documentation on your set should be avoided. IMO, it is completely unprofessional to not have the service info on the set and doing our homework before attempting a calibration. Anyone who has to rely on the client to get that info is not a pro in my view.

You will not likely be fixing a geometry problem in the service menu for an SXRD set anyway.

I'l looking for the service code for the Dell 3707C. Bruzzi, please provide me with the information. It seems that the codes you have don't seem to be working.

I'l looking for the service code for the Dell 3707C. Bruzzi, please provide me with the information. It seems that the codes you have don't seem to be working.

Sorry, I don't have that info yet. I've been very busy in the past four months and I had no time to search for more codes.

Did you try Dell Community Forums ???

.

Please, does anybody know service codes or where to find a service manual or diagrams for the DP9200?

I have a problem with the image gosht.

Thank you

Bruzzi, I visit that forum quite often. There seems to be post made about people wanting to access the service menu but noone seems to know it... Well, since your a busy person if you ever come across it please don't forget to post it here... Your help is truly appreciated.

i'm looking for the service code for the Insignia NSLCD26f

Im lookin for a PIN Number for a LWT-46000 . . .

Hi everybody! I am french (sorry for my bad english) and i got a problem. 3 days ago, i bought a "Hannspree Xv JT02-37E2-000G 37". I saw on lot of forums that it is possible to adjust the backlight on this model. But in my settings menu, i can't. So i made research on internet, and i saw there's a "hidden" menu called "service menu", that is accessible by pressing "MENU-9-9-1". I tried this "code" but it doesn't work.

Does anybody know the code to enter this "secret menu", or know how to set the backlight ?

Thanx a lot.

I'm looking for service menu codes for the Olevia 265TFHD-T11 please

Bruzzi, I visit that forum quite often. There seems to be post made about people wanting to access the service menu but noone seems to know it... Well, since your a busy person if you ever come across it please don't forget to post it here... Your help is truly appreciated.

I'll have more time now that the holidays are over. :)

.

Hi im from scotland and am also looking for the service/factory menu code for the Hannspree Xv JT02-37E2-000G 37 UK/european model. i have tried the Menu 991 code to no avail. and im not alone, i started a thread on another forum requestion this and there has been allot of response from people looking for this code. if your able to help bruzzi or can even sujest where a good place to start looking is. we would all be very greatfull.

why cant we post service menus here. they are our tvs?

My Insignia 040709 (26" 1080i/720p CRT HDTV) is missing so much content. The D in ESPNHD is cropped off!

I have no idea how to get into these menus, but pm me if you have some idea. Sansui might have made the tv, it is from 2005

Hi, does anyone know the service menu code for a Hisense PDH5039EU? I would like to check if I can turn off some image filters.. there is some ghosting visible when I use my HDMI input. :(

Thanks

Hello everyone!
I would like to know how to access the service menu on my tv, and hopefully correct green levels...

I have searched and searched, but this brand seems to be kind of "rare", its a Mirai("www.mirai.eu") and the model is DTL-632V200

Need service menu code for Sceptre 42" LCD X42BV - or any Sceptre TV might work. Thanks.

Does anyone have a Service Menu code for ANY model of Sceptre LCD HDTV? We have a X37NV Naga, but I would be happy to try anything at this point.

Thanks much in advance!

- MetalDave

Can't find the code anywhere. Do you have it?

im in the same boat, anyone know how to make those codes work? :)

Same here.
I have a Hyundai E320D that I'm trying to get the Service Menu code for. :/

I have a Sony Bravia KLV32U300A, and I've tried using the sequence: display,5,+volume to no avail. Each time I press 5 the tv turns on and goes to a local channel which is in 5. Can somebody please help me?

Hello.

I have a BenQ W500 projector. It might be BenQ's first LCD projector. I was would like to put in a request for the service menu access code. I think it would be useful seeing as a lot of people think its downfalls could be resolved by tweaking the gamma curve.

I have tried all the Benq codes on http://www.bruzziforum.com. Unfortunately they do not work.

I have spent a few weeks searching online for the access code, but without luck. Please PM me if you find the access code or if you have some good resources I could use to find it myself.

thanks!

does anyone know how to get into a sony 1080p KDL-46v2500 service menu? i read on this forum that the code is the following:

with set off, press display, then 5, then +volume, then power quickly. no matter how fast or slow, or many times i do this, it doesnt do anything................im wondering if it was the wrong code or if there is a trick to it?

Is there any who know service menu for proxima x350 , ASK M3 or Yokogawa D-1200X ?

does anyone know how to get into a sony 1080p KDL-46v2500 service menu? i read on this forum that the code is the following:

with set off, press display, then 5, then +volume, then power quickly. no matter how fast or slow, or many times i do this, it doesnt do anything................im wondering if it was the wrong code or if there is a trick to it?

posting again to see if someone can help.

Does anyone know the service menu for Hitachi P50V701? I have been using menu-menu-8-select and it does get me into a different menu, but I dont know if I'm doing something wrong or not because alls I can find in this menu is basically the drives for high med std or b/w but no cuts, or any other option that has to do with the picture itself (as far as I can tell). So I dont know if I'm in the right service menu and not pressing a specific button or if I'm in the wrong menu all together!!! Any feedback or help would be greatly appreciated. Thank you.

I'm looking for service menu code for Protron LCD HDTV's. Does anyone have any info on those?

dude this is a great thread idea!!

I wonder if anyone knows how to get into the EMPREX 3202H HDTV's Service menu, I know many people here got one from FRY's and the set seems cool for what it cost but the only problem I have with it is that the Backlight seems to be too powerful, also the GAMMA or CONTRAST seems too high on HDMi(PS3 browser shows grays too bright), other then that it is fine.

Looking for service menu for NEC 1940wcxm or possibly the generic cx series service menu. The only nec monitor codes I can find online don't work for this particular monitor so I'm trying my luck here.

EDIT: I found it on my own.

1. Mute Volume
2. Go to info pane w. serial number
3. Press reset/mode, volume + and volume - all at once and release.

Hi
Asking you the access code for service menu
fo SHARP 32" LC-AD5E(Sharp's European opreration
series)
Bye+

I noticed on the BruZZi website that it does not mention projectors?

I have searched this thread, but have not found anyone asking for these:

InFocus SP7210

Mitsubishi HD1000U

Runco VX5000D

If anyone has the codes or if BruZZi can come up with them I would appreciate it!!

Hi, my set is a Samsung TX-P2665W

I would like to know how to access the service menu please, can someone help with that?

Thanks

Display is a Tosh 50HP66 plasma. Have worked on it before in service menu. Tried yesterday and standard method of service entry (vol- on set and 9 on remote for >2sec) DOES NOT WORK! What's up with this? Have done a dozen of these and never had any prob. Need help. Please advise.

Westinghouse LTV-40w1 HDC.........please.
I tried the three methods on the Bruzzi Forum and they did not work.

Thanks

Anyone know where can I get the Service Manual for Sanyo PLV-Z2000?

I'd love to know how to get to the service menu for an Olevia 232T. Thanks very much!

Anyone know how to change the "clamp" or "sync/timing" settings in the service menu of a Mits WS- series HDTV? I am trying to resolve the color banding issues related to the HDMI to component converter. Thanks.

I've been searching around for some time for the service menu code for this 32" LCD HDTV, the Emerson LC320EM8

The Funai/Emerson/Symphonic codes on Bruzzi's don't seem to work. At least if I'm getting the correct button sequences. My remote (as do most Funai and Symphonic remotes I've seen recently) doesnt have buttons explicitly called RECALL or DISPLAY. I've went under the assumption that these would be CH RETURN (which recalls the last channel) and either SCREEN MODE or INFO...

Any help appreciated. :)

Hey I have an Olevia 537H, I tried the "source" + "vol-" + "ch-", but nothing. I searched the thread and didn't find anything about the 537H so any info please?
Thanks in advance

Hey I have an Olevia 537H, I tried the "source" + "vol-" + "ch-", but nothing. I searched the thread and didn't find anything about the 537H so any info please?
Thanks in advance.

B11 or B12? What is your firmware version?

You have to hit all three precisely at the same time, try several times. Verify the buttons you are pressing, the Channel Down is next to the Menu Button (Olevia did not keep the Vol/Channel +/- placement consistent).

It has worked on every 537h I have tried.


From another post:
How did you access the service menu? I assume via the RS232C port, but what did you connect it to?

This has been covered long ago... for the record, the 537h (both B11 and B12) respond to the SOURCE, VOLUME DOWN (vol -) and CHANNEL DOWN [Ch-) Buttons (on the TV itself) at the same time and will enter the Service Menu. MENU Button will exit. YOU NEED TO HAVE THE TV POWERED ON TO ENTER THE SERVICE MENU!

I had been working on a ControlCAL Display Profile (see link in my signature below) for the 537h's which would allow you too access several controls via RS232 during calibration, but I got side tracked with the Pioneer ISF Display Profile.


First screen cap is the B11, 2nd is the B12 (sorry for cap quality, I simply used the camera in my phone):

http://www.avsforum.com/avs-vb/attachment.php?attachmentid=106384&d=1207061547

http://www.avsforum.com/avs-vb/attachment.php?attachmentid=106386&d=1207062009

Anyone have the code for the service menu
for my samsung syncmaster 244t
Many Thanks.

I'm looking to correct an overscan issue with my Xbox 360, does anyone have the service menu code for the Pioneer 533HD5?

Philips PFL7422D/98 - I have this (Europe/Asia) specific model.. anyone with the service menu codes?
TIA!

Hello people

I own an LG 32LE2R and i have entered in the service menu trought "press menu in remote + in menu in tv".

Today i have presed and keep menu in remote and a 4 digits pin prompt pop up to "enter password"!

I have tried "0000", "7777", "8741", "9876" (+"1111", "4286" wich i found in some forums) but none worked and i get "wrong password".

Does any know the pass for 32LE2R?

Thanks in advance

Anyone have access to, and willing to share the training manual on this chassis? It would be deeply appreciated.

Thanks,
schlick

Sceptre X46BV please.

-Thanks
Vlad

The codes out there don't seem to work for my

Would appreciate if someone has the codes for the latest models

Mine is Sony Bravia 32L4000

thanks

Left, Right, Muting, Select, Muting, Menu

is the method to get into the service menu on these units, but it will not do you much good. You cannot change anything, only review the settings.

so i guess im out of luck on getting rid of that nasty overscan ... unless i swap the tv out

thx

Looking for Byd:sign d:4232, please... any help would be appreciated.

Thanks,

J

Bruzzi, I'd like the service menu code to my Magnavox 20MC4304/17 CRT television with built-in DVD/VCR player.

Here is the product page:

Magnavox 20MC4304/17 (http://www.magnavox.com/index.cfm?event=main&cat_id=3&subcat_id=1&product=31)

Note that the remote supplied with the television doesn't have a MENU, INFO, or STATUS button. I've done some Googling for Magnavox service menu codes and all I've found mention the use of one of those three buttons in the button sequence.

Thanks for your help. This television desperately needs adjustment. I get purple splotches in the corner whenever there is a brown color on screen.

Would love a service code for this commercial Philips display

42HF7544D/27

looking for 32L4000 service codes
the ones available online don't seem to be working

It will not do you any good, as the new service menu on this series does not allow you to make changes. You would have to hack the EEPROMs on the various boards, which no one that I know of has done yet.

Have been into the service menu, and found the white balance category, took care to write down all settings before tweaking on them. However, after going through several of the available parameters, while displaying stairstep pattern, am unable to discern any change in drive/bias. Also tried resetting the user white balance controls, then re-entering the service menu to see if any value changes could be noted. None were. Anyone with an idea of what parameters affect the hdmi 1 input, your feedback would be appreciated. Need to bring the overall blue gain up the equivalent of 2-3 points in the user menu, as the user menu value currently is set at zero, but need more latitude for adjusting.

thanks,
schlick

[req] Service Code for Sony Bravia S4100.

none of the standard Bravia codes work with this new "S" model.

I've been searching around for some time for the service menu code for this 32" LCD HDTV, the Emerson LC320EM8

The Funai/Emerson/Symphonic codes on Bruzzi's don't seem to work. At least if I'm getting the correct button sequences. My remote (as do most Funai and Symphonic remotes I've seen recently) doesnt have buttons explicitly called RECALL or DISPLAY. I've went under the assumption that these would be CH RETURN (which recalls the last channel) and either SCREEN MODE or INFO...

Any help appreciated. :)

SOLVED!!! Sharing this info for anyone who may find it of some use for other Emerson/Funai/Symphonic tv's...

I stumbled across this on a random day trying once again to figure out the service menu on my Emerson LC320EM8, by basically digging through every funai LCD service manual I could find on funai's german ftp server. As these remotes seem fairly universal to all Emerson/Funai/Symphonic (as well as a host of store brand) tv's......give this a try..

There's a hidden "service" button on the remote located below and in between the locations of the CH +/- and VOL +/- buttons....you have to cut the bezel on the remote to reveal it...
http://www.fastsilicon.com/images/service.jpg

How to initialize the LCD television:
1. Turn the power on.
2. To enter the service mode, press the service
button on the service remote control unit. (Refer to
page 5-1.)
- To cancel the service mode, Press POWER button on
the remote control unit.
3. Press INFO button on the service remote control
unit to initialize the LCD television.
4. "INITIALIZED" will appear in the upper right of the
screen. "INITIALIZED" color will change to green
from red when initializing is complete.

Hope this info is useful to someone else...
regards,
Scott

Looking for code for a Symphonic WF32L6. I looked at Bruzziforum and none of the 7 codes seemed to work.

SOLVED!!! Sharing this info for anyone who may find it of some use for other Emerson/Funai/Symphonic tv's...

I stumbled across this on a random day trying once again to figure out the service menu on my Emerson LC320EM8, by basically digging through every funai LCD service manual I could find on funai's german ftp server. As these remotes seem fairly universal to all Emerson/Funai/Symphonic (as well as a host of store brand) tv's......give this a try..

There's a hidden "service" button on the remote located below and in between the locations of the CH +/- and VOL +/- buttons....you have to cut the bezel on the remote to reveal it...
http://www.fastsilicon.com/images/service.jpg

How to initialize the LCD television:
1. Turn the power on.
2. To enter the service mode, press the service
button on the service remote control unit. (Refer to
page 5-1.)
- To cancel the service mode, Press POWER button on
the remote control unit.
3. Press INFO button on the service remote control
unit to initialize the LCD television.
4. "INITIALIZED" will appear in the upper right of the
screen. "INITIALIZED" color will change to green
from red when initializing is complete.

Hope this info is useful to someone else...
regards,
Scott

I actually just took apart my remote to give that a shot, though my remote looks a little different. I found a trace on the remot that does *something* but it's not really a service menu.

Using this remote:

http://remotecontrolwarehouse.com/remote_img/NF015UD.jpg

There are two "buttons" in the gap on the top right, below "Input Select" and above "Audio." They've got contacts on the underside, but the rubber is shaved down so it can fit under the cover.

Anyway, when I press the lower of the two, the one closest to audio, I get some text on the top left corner:

Ver: Mar 24 2006 (20:08:02)
Boot Push 0key
System Push 0key
SubmiconVer 051126
Calibration Check OK

Problem is, none of the buttons seem to respond after this unless I turn the TV off and on again. And there doesn't seem to be any actual menu to change anything.

edit: If I hit the VOL- button on the TV itself, that info goes away and a box that says "C/D - " comes up, but doesn't seem to respond to any inputs.

Might anyone know the code for the HP ID5220? Unfortunately, BruZZi's site only lists the HP LCD and Plasma codes. I guess I can try them, but I'll have to turn off the set and let my lamp cool first (so unplugging it when it's on doesn't ____ the lamp up!)

I'd like to clean up the overscan a bit, or at least get everything centered.

Thanks in advance! :)

Looking for code into service menu for Akai PDP6065TA and/or PDP5073TM.

TIA

I know how to access the service menu on my Sony KDL-40XBR3, but I am trying to decipher what all the item codes mean. The service manual doesn't offer much explanation. Can anyone point me to this information.

Tomorrow, I'm getting a new Sony 40-inch S3000 LCD HDTV. All I want to do....the ONLY thing I want to do, is make sure my color decoder is corrected. I did it with my Sony direct-view. Can someone PM me and let me know how to get into the service menu, which buttons navigate and if the color decoder codes are the same as my Sony direct view?

I sure would appreciate the help!

Am needing service code for Insignia's new 32" plasma model #NS-PDP32-09. Thank you!

I am looking for the service menu codes to the Insignia NS-LCD37-09 HDTV
all the "insignia" codes on bruzzi's service menu access codes for insignia do not work for this TV.

The new non-Elite models of the Pioneer plasmas lack some basic calibration options, such as colour temperature. Are service codes available for these newer sets (I have tried codes posted for other Pioneer plasmas but to no avail)?

i need the code for a vw26l vizio

I have a 47" Westinghouse LVM-W1 and have got to a plain white screen that I can't seem to exit while trying to access the service menu? Anyone have any clue?

I can not seem to find the service menu steps for the th-50pz80u

can you help me out and PM or post them

Thanks

Joe

Greetings

Same as for all the other panasonic sets ... from this year and last year ... and the year before.

Bruzzi, I got the Service Menu Code for the EMPREX 3202( 1 HDMi model ).

Press 7 1 5 3 then press MUTE

it shows up.

I'm in a bit of a spot. We're trying to get this deal of a TV worked out for use in a hospital. We're hooking them up in patients rooms, so all we need to do is disable the buttons on the side of the TV. I know most do that through service mode, but I'm having no luck with finding it.

32PFL3403D/27 Philips TV.

Anyone know anything that might help?

Hi,
Requesting the service menu code for a polaroid LCD TV model FLM-4232HM, I tried the other codes on the page but my remote doesn't have the AV key.
Please Help me!!!:eek:
Thanks!
...

Bruzzi, I got the Service Menu Code for the EMPREX 3202( 1 HDMi model ).

Press 7 1 5 3 then press MUTE

it shows up.

Thanks. :)

Do you need to turn the volume all the way down???


.

Hi,
Requesting the service menu code for a polaroid LCD TV model FLM-4232HM, I tried the other codes on the page but my remote doesn't have the AV key.
Please Help me!!!:eek:
Thanks!
...

Did you try the codes for Prima ???

Try pressing and holding the {VOL+} and {CH -} buttons on the TV for few seconds.


.

Did you try the codes for Prima ???

Try pressing and holding the {VOL+} and {CH -} buttons on the TV for few seconds.


.
Yes, I tried all the Prima codes and also the Vol+, Ch-. None of them worked. Any other ideas?

Thanks for your help. I really appreciate.

Yes, I tried all the Prima codes and also the Vol+, Ch-. None of them worked. Any other ideas?

Thanks for your help. I really appreciate.


Oops, I meant {VOL+} and {CH+} buttons on the TV :rolleyes:


.

Anyone know for a RCA 14" 14F514T ??? All typical RCA sequences not working for me

Hi, I was trying to access the Service Menu of the Memorex MLT3221 to make a few tweaks to the piture. I tried all the codes you listed for Memorex, Durabrand and Vizio. Nothing seemed to work. If you happend to know the code could you please send it to me? Thank you for your help.

[req] Service Code for Sony Bravia S4100.

none of the standard Bravia codes work with this new "S" model.


anyone figure out if there is indeed no service menu on the S models?

Anyone help me with service code for prima/shov/lexsor/harwa LC32W18
I tried hundreds of codes but nothig works
Thanks in advance

Oops, I meant {VOL+} and {CH+} buttons on the TV :rolleyes:


.
Thank you! It works...

Hi Bruzzi,

Could you provide the service menu code for a Hitachi LCD TV type L37X01A?
I was unable to find it in the list supplied in the first page on this list.

I'm trying desperately to find a way to disable the overscan feature of this TV. When connected to a computer with a HDMI cable the windows screen gets cut off arround the edges by about 3%.

If you need any further details please let me know.

Cheers,
Peter

it seems the new set of insignia sets uses some different method to get to the menu than what's currently listed

i need the access to get in on the insignia NS-LCD42HD-09

it seems the new set of insignia sets uses some different method to get to the menu than what's currently listed

i need the access to get in on the insignia NS-LCD42HD-09
I've just spoken to a friend of mine who is in the know, and he tells me that there is no service menu on this set. I truely hope that he's wrong but i doubt it

Looking for service manual access sequence for an Akai LCT3285TA LCD TV. I tried the seqeunces on the main page link, but none worked. Thanks a lot.

The service manual that I have has no information for service menu access for this model.

I would love a service manual for either Panasonic pz80e or pz8e.

The service manual that I have has no information for service menu access for this model.

Thanks for checking. I'm getting some light bleed through in the corners that is most noticeable with 4:3 content. Is there way to dim the LCD backlight short of decreasing brightness? Are there any other user settings not in the regular menu?

does any body know how to access the service menu on a Sharp 32" LC-32D44E-BK?

Thanks
(I have tried the following with no success:

# While the LCD is on, unplug the power cable.
# Then while pressing the {INPUT} & {VOL -} buttons on the remote,
plug the power cable back into the outlet.

# When it powers up you will see a little "k" appear in brackets.
# Then on the TV, press and hold {VOL -} & {CH -} down and release.
# The Service Menu will be displayed.

# Use {CH+} {CH -} buttons to navigate
# Use {VOL+} {VOL -} buttons to adjust the value.

# Turn the set off to exit the Service Menu.

and


# Unplug the power cable.

# Press and hold the {CH+} & {VOL+} buttons.
or
Press and hold the {CH+} & {VOL -} buttons.

# While holding both buttons, plug in the power cable.

# The TV will turn on with the Service Menu displayed.

# Use the {CH+} {CH -} buttons to select items.
# Use the {VOL+} {VOL -} buttons to adjust values.

# To exit, turn the set off.

)

I've tried Prima codes as some have suggested, and the CH+ and VOL+ buttons on the tv, and none have worked, anyone got ideas? any help is much appreciated (:
P.S. The reason I need to get into service mode is that whenever I put my xbox 360 into 720p or 1080p, it stretches the picture top to bottom (since it's a 4:3 tv), so I was hoping maybe I could fix it through tha, so any alternatives are also awesome (: Thank you!

I'm looking for the code to enter the service menu on this set (Toshiba LCD 42AV500U). It's a 2008 model and the service menu codes mentioned so far in this thread dont allow access to the service menu.:( Is their any newer codes that have to be used?
Reply or PM please!!

Thanks
bill:)

Hi Bruzzi,

Could you provide the service menu code for a Hitachi LCD TV type L37X01A?


Sorry, all the codes I know for the Hitachi TVs are already posted on my site.


it seems the new set of insignia sets uses some different method to get to the menu than what's currently listed

i need the access to get in on the insignia NS-LCD42HD-09

Try the codes for LG TVs.

I would love a service manual for either Panasonic pz80e or pz8e.

Send me a PM. I have a source.

does any body know how to access the service menu on a Sharp 32" LC-32D44E-BK?

Thanks

Couple more codes for Sharp were added. Try them.

I've tried Prima codes as some have suggested, and the CH+ and VOL+ buttons on the tv, and none have worked, anyone got ideas? any help is much appreciated (:

Don't know any other code yet. :(

.

Am needing service code for Insignia's new 32" plasma model #NS-PDP32-09. Thank you!

Try the codes for LG TVs.

.

Looking for code for a Symphonic WF32L6. I looked at Bruzziforum and none of the 7 codes seemed to work.

5 new codes for the Funai / Emerson / Symphonic LCD TVs were added. Try them.

.

Does anyone know how to enter the service menu on an Acer AL1916? I actually have two slightly different models, the AL1916s and AL1916As. The Acer code on the site don't seem to work for these. Specifically, the Power button does not respond (ie you can't turn it on or off) if you press it while another key is already pressed.

We also have an AL2216W and the known methods didn't work on that one either.

Does anyone know how to enter the service menu on an Acer AL1916? I actually have two slightly different models, the AL1916s and AL1916As. The Acer code on the site don't seem to work for these. Specifically, the Power button does not respond (ie you can't turn it on or off) if you press it while another key is already pressed.

We also have an AL2216W and the known methods didn't work on that one either.

Try this:

http://www.hardforum.com/archive/index.php/t-1102723.html

.

Thanks, it works. I was hoping there would be additional settings for geometry but it's pretty much color related only. Specifically I have a hardware device that outputs a 640x480@60Hz VGA signal which looks pretty bad on this 1280x1024 monitor. Even though 1280 is 2x640 there is a horizontal blur in some places regardless of how much I tweak the clock, focus etc. and vertically it appeas the Acer is determined to strech the 480 lines to the full 1024 instead of 960 :(

If anyone knows of a current LCD that would do a really good job display a 640x480 signal please let me know.

Thanks again BruZZi. I'll be sending you a PM with the combination for the AL2216 that we just found based on your link.

You're Very Welcome ArjanPSD. :)

I'm glad the code posted in the hardforum.com also works
for your AL1916/s displays. But too bad it didn't do any good for you. :(

And thanks for the access code for the AL2216 Model.

:) :) :)

.

does any body know how to access the service menu on a Sharp 32" LC-32D44E-BK?


I've posted another code for the Sharp LCDs:


"Press and hold the {TV/VIDEO} & {MENU} buttons
and then turn the power on" ...


Try that one.

.

just curious if samsung A650 have usage hour in the service menu ?

just curious if samsung A650 have usage hour in the service menu ?

It does.

Try the following thread for instructions:

http://www.avsforum.com/avs-vb/showthread.php?t=1007540

.

Looking for service menu access for Insignia NS-PDP50HD-09.

Thanks!

Looking for service menu access for acer al2216w thanks.

sorry for my litle englisch

Any chance you guys have the service manual for LG series 30 TVs? I really want to disable the backlight dimming feature as it's retardedly implemented.

Showing a night sky with clouds moving in front of the moon the thing can't decide what to do and switches the lamp up and down every second or so. Seriously even the simplistic way of detecting when to dim down the lamp would work fine if only they had made it so it adjusted gradually over 3-4 seconds but no, the thing jumps all the way down or up in one single step.


It's an 22LG30, I can get into the service menu by holding the MENU keys both on the TV and remote. I am willing to try and solve this by cutting some wires inside if it comes to it.

Optoma H78 DC3 and H79 Please would be great. Thanks

Hi, seems your forum is closed atm. My tv has reset to fatory defaults (at least its what I think happened) the remote fell and landed on the key pad and all seemed to go wonky. Pic is now inside a black box with a weird wavey line top of the screen. Could do with the code so I can change the pic size etc.

Tv is either (looking at the manual) Daewoo DTF29 or DTP25 or DTP28.

Please help!

Hi Bruzzi. Looking for service menu access to a Panasonic TH-42PH10UKA. Thanks in advance.

pedro@flcusat.com

Hi Bruzzi,
I have proview MH462SU plasma which uses a panel made by
Chunghwa Picture Tubes of Taiwan.

Would appreciate if you could give me the service menu code for this or maybe some
other manufacturers codes to try.

Thanks

please send me pm, how to in service menu panasonic pz80u, thanks

Looking for service menu, if possible, on this NEC monitor: LCD1960NXi

Thanks!

Paul

Please, if possible service menu for Gateway FHD2401 monitor. Acer has acquired Gateway so I don't know if any old codes work but I'm willing to try.

My set just crashed and need to try a reset. Codes for the service menu or even a manual would be wonderful if someone has them.

Its a Hisense 42 HDRA and hisense has abandoned us buyers.

Is Bruzzi's forum down? When I go there it's empty. I need to look-up LG service menu access codes to try them on an Insignia.

Hello...

I am looking for service codes to a JVC AV-32D501 CRT display.

Thanks

RJ
...

Hi All
Anyone have the service manual for the sony 52kdlw3000 and are willing to share.
thanks

try ENTER - ENTER - LEFT < - ENTER

"Do you want to enter factory/service mode?" might pop up.

If this doesn't work, how old is your sony?

You might also try DISPLAY - 5 - Volume UP - POWER

i can get into the service mode,i just want to navigate and know the codes while iam in there.

thanks

Be Careful!

You should order a service manual on the display for complete info.

Hey all! Still trying to access the service menu for the Insignia LCD42HD-9. Been looking forever with no luck. Can anyone help? Thanks!

~BD69

Hey all! Still trying to access the service menu for the Insignia LCD42HD-9. Been looking forever with no luck. Can anyone help? Thanks!

~BD69

Try the procedure I described in this post for the Insignia NS-PDP50HD-09: http://www.avsforum.com/avs-vb/showpost.php?p=15008969&postcount=120

I have a SYMPHONIC 19" tv/vcr combo set model # SCC 199Y and would like to know how to access the on screen service menu.

I am assuming that the remote is used but have no idea how to go about accessing it.

I have done service adjustments to Panasonic tvs using the on screen service menu, such as cut off adjustments, ect and they worked very well.

Any help would be appreciated!

Does anyone happen to have the Service Menu code for an InFocus RP10x?

Hi,

I'm trying to calibrate my 46XBR8. I think I can modify primaries with the standard controls, but secondaries are not reachable from there. Do you suggest getting into the service menus (I am not an expert at all) and know how to get there and/or where to get a service manual, please?

Thank you very much,
Ciccio-

I have the service manual for my sony kf-50we610 but I don't know what all the codes stand for. I am looking mostly for horizontal and vertical size and position. Thanks.

Hi, I have just replaced my lamp in my Sim2 Domino 30h projector and I want to reset the lamp hours back to zero and I am guessing that I need a service code for that? Thanks :)

I have a Pioneer Elite PRO-1150HD 50" Plasma. Do you have the service codes for this HDTV? If so I would be greatfull if you would help me out with that. Thank you very much.

Mark

I need the service codes for Hitachi 43FDX01B any help appreciated.

I'm thinking about buying a floor model Sony KDL-40wl135. Is there a way to display how long the TV has be on? They don't know how long they've had this on the floor and there are 2 display units left.

Thanks

Every time I go there, all I see are three dot's "..." in the shaded blue area.

There is a "Log On" box. Does one need an invitation to access the site?

Or has it just been down for a week or so?

Signed: anxious!

Does anyone have the service menu access code for a panasonic TH-50PZ80U

Thanks
RayJr

Hi,

Does anyone know how to access the service mode on Nokia SP71K1???

I know its an old set now but could just prolong it a while if I could get into the service menu.

I've looked around and cant find anything at all.

Please help!

Thanks.

i can get into the service mode,i just want to navigate and know the codes while iam in there.

thanks

what code combo did you use to get in?
display-5-volume up-power?
I have a sony S41000 and I can't get in.

looking for service manual and codes for the pro-610hd

Looking for service menu codes for a Sceptre X32BV-FullHD. Thx.

Looking for an optoma EzPro 753 service code

Hi BruZZi

can you pleeeeeeeeese help me, i need a service code for a Polaroid FLU-1911S

Its really getting on our nerves and we need to adjust it :mad:


many thanks in advance :)

Bruzzi's form seems to be down !!!!!

opps forum :)

Hi BruZZi, I was looking for the service menu code for a Sharp LCD LC-20SH21U.
I need to unlock some channels but I forgot the password I set before since there's been a while since I last used it. :(

Many many thanks in advance.

ps When I tried to follow the codes' link at the beginning of this thread I was linked somewhere else.

Would like the service menu code for a Magnavox 32MF338B/27 LCD TV. Thanks!

I would really apretiatite if someone has info about how to get into the service menu of a:
Mirai DTL-632V200 ?

If I could get some help in re-accessing the service menu on my Westinghouse LTV-32w6 that would be awesome. I got into it once before and changed some stuff on accident.