If anyone can PM me the service menu code for a Philips 42PFP5332D/37 I would greatly appreciate it!

Edit:
Nevermind, found it!
Searching through these forums is like digging through a haystack!

Does anyone know the service menu code for an Asus VH236H monitor? Or a generic Asus code? Thanks.

Looking for the Service Menu Access Code for Panasonic 54VT25. Thanks.

Is anyone aware of service menu access for Fujitsu plasmas of around 2002 ?

could someone who has the access codes for a panasonic th-42px80u send them to me? thanks in advance.

hi ya. I'm looking for the code for the Optoma HD72. i found it somewhere here before but no luck now.
please help.

Anyone have the service menu codes for a Panasonic TC-P58S2?

Thanks in advance!

Hello,

I need the service menu access codes for the VX32L , please let me know if anyone has any info on this.


Thank you!

Requesting service menu code for Panny Tc-p54z1.

Thanks,

Joey

Looking for the Service Codes for the Sharp LC-42SB45UT in order to adjust the overscan.

Looking for service code for Pioneer SD-643HD5 television. I need to calibrate. Thanks in advance.

I'm looking for Service Menu codes for KLV-40EX500

Looking for service menu code for

PROSCAN 40ld45Q

Another request for this one...

Hello I am looking for a service manual or service menu access code for vivo
A32L07T 32 inch full hd lcd tv. Thanks in advance.cheers

Mitsubishi WS 65819

Also, a respectable site for obtaining service manuals would be a great thing to have. Any suggestions?

Why the hell wasn't any of this covered in ISF I and II? We were taught to calibrate with user menu controls, and as I learn and research it, it seems to me there's SO much more functionality in the service menu.

Looking for the service menu code for an Acer AL2216W. I know there was a request way earlier in the thread, but that link seems to be dead.

Thanks again BruZZi. I'll be sending you a PM with the combination for the AL2216 that we just found based on your link.

You're Very Welcome ArjanPSD. :)

I'm glad the code posted in the hardforum.com also works
for your AL1916/s displays. But too bad it didn't do any good for you. :(

And thanks for the access code for the AL2216 Model.


I need this access code for the Acer AL2216. How come you guys PM each other instead of just posting the code in the thread??? Please let me know the code, thanks!

I need this access code for the Acer AL2216. How come you guys PM each other instead of just posting the code in the thread??? Please let me know the code, thanks!

Please send it to me as well, I need the code.

Mitsubishi iris service code for 2007 DLP's better known as "Dark Detailer".
There is a specific code (4 digit number) to turn the iris function off (only temporary). Anyone know what it is? This is NOT in the 2470 or 2457 menus.

Could someone please send/PM me the info to access Service Menu for a Panasonic TC-P65S1. Thanks in advance.

I have the access code for my Panasonic TX-L19X10B, at least I think it's the right code, but when I try and save the settings it's not working. Basically chaning the value turns it to red then when I press ok as instructed, both values (is the default and the one I change it to) are black. I've managed to get it to change to the chosen values and stay there whilst in the service menu by using the coloured buttons on the remote but when I exit or switch on again the settings are back at default. Please help.

If someone in the know would be so kind as to send me the code for this TV I'd be ever grateful. Thanks. VO47L FHDT10A seems to be the entire model number if that matters.

Looking for the service codes for a TC-P42G25 (and TC-P42G15 if they are different)

Thanks!

Still looking for service menu codes for AOC Envision L22W898. The codes I have found for other AOC models don't work.

Another request for this one(40LD45Q)...

I would love the Proscan 40LD45Q service menu codes as well. This set's default menu is missing the ability to do some really basic adjustments.

Need service menu code and help with overscan on Panasonic TH-58PZ850U.

Thanks!

insignia ns-42p650a1 service menu- same as Samsung service menu codes. With tv off press mute-1-8-2-power

Can someone assist with the access code for a LG 60 PS40FR 60" Plasma?

Looking for the service menu instructions for an Insignia NS-L322Q-10A. I'm looking to turn off overscan.

I have an APEX LD4088 LCD TV. I need to get into the service menu, which for this model just turns on the Advanced menu with extra options.

I originally had a problem and after searching i was able to get in there and fix it. I don't remember what I did but I can't seem to get back in there.

I've tried setting the volume to 0, pressing mute on the remote and menu on the tv, it does nothing though.

Another code said to press video on the tv but i don't have a video button.

Please help!

Looking for Service menu code for Panasonic TX-P50C10Y
Thank you!

Looking for the Service Menu code for an Insignia NS-LDVD26Q-10A. If anyone knows what it may be please send me a PM. Thanks in advance!

Looking for the service menu access/code to Panasonic TC-P50G20...PM me please!:)

I'd be ever so grateful...

Viore LED32VFZ61 Service Code access. Mine's out of warranty, and I need to turn down the backlight.

Thanks!

Like cyberbobcity above, I am also looking for a way to access the service menu for the Apex LD4088. The only information I could find after scouring Google for a while seems to apply to earlier models, and doesn't work on the LD4088.

Can anyone help?

Does a Vizio V0320E even have service menu access? PM me if it does.

This fix worked for me, thank goodness for this forum.
I really appreciate the help

kysangel

Hi all,

Not sure if this can be fixed by service menu or not (convergence). I'd love a service code / menu for this model. MT1050

Thanks,

Looking for the service menu codes for the LG 42PJ550.

Hi -
Please shoot me the service code for a Panasonic PT-52LCX16.

Thanks!

I want to adjust my Tc-p50x1 tnph0800 2 A board to fit my Tc-p42x1. The tnph0800 is fault and the screen is too wide when i use the Tc-50x1 board. What can i do.

Looking for Panasonic P65S2 code. Thanks!

Looking for the code to access the service menu on the Dynex DX-19L150A11.
****The old code of input 2580 for the older DX-L19-10a 19 inch model does not apply.***

Anyone have the service codes for a Philips 50PF9956/37 and a Westy LTV-32W3.
Thanks

can anyone tell me the sevice menu code for benq w600 or w600+ (supoose they are the same)?

Could someone please send me the procedure to access my Panasonic TC-P50S2 service menu? Thanks a ton!

I'm going absolutely insane looking for this...

Need the service codes for the Insignia NS-L37Q-10A or NS-L42Q-10A

Has anyone actually received a response to a request here?

It appears that actual beneficial responses are few and far between. I think people would have more luck posting their requests over in the appropriate display forum.

Not that anyone will likely respond... but please Vizio E370VA... need service menu codes...

if I could just turn off the adaptive luma and noise reduction when using hdmi inputs in "custom mode" or allow me to adjust contrast/brightness in "game mode" I'd be happy.. but no... why don't they let me do this?

Friends, I am using AKAI CT2244V CRT Television please help me to get the service Mode.

Looking for the service code for the Apex LD4688 which is probably the same as the LD4088.

Also wondering how to access the "Retail Mode". Any help is appreciated!

Hey guys, first post here!

Looking for the service code for the Sony Bravia KDL-40EX400.

If anyone could PM this to me, I'd be extremely grateful! I'm ready to get this baby calibrated properly and looking the way it should.

Thanks and look forward to all this community has to offer!

Does anybody know if there are controls in the service menu on the Samsung UN55C6500/7000/8000 to adjust the secondary colors?

Can I get the info on accessing the service menu on a Panny tc-p56s2? Thanks!

Looking for the service codes for the Panasonic P58VT25.

Hello all, I'm looking for the service menu access code for a Dynex DX-LCDTV19.

Best regards,
Joe

I have 2 older TVs that I was thinking about getting rid of, but I wanted to give them one last shot at fixing.

Panasonic TC-P42U2
Sony KDL-32XBR4

I wanted to get into the service menu to try some more adjustments, and to find some tweaks here.

Panasonic is almost unbearably awful, and the Sony- if it goes back in its place- I would like to fine tune.

Panasonic seems too bright on contrast and gets block and "sparkly* on close ups..... but I have searched for a few hours and could not find a way to access the service menu-

If you have either, can you send me a link or an instruction set.

Thanks-

Edit: I wanted to add a better description of what the image looks like- Whenever a PC video card is crapping out or resorts to low resolution/low color density mode- the color gradient gets horrible because it's unable to reproduce all the shades in between at brighter levels-----
that's what my Panasonic looks like!!

Anyone know the service menu code for a Panasonic TC-L42U22

Thanks

Looking for codes for Panasonic TC-L37D2. Thank You!

Does anyone have the service menu info for a Sony Bravia KDL 32-ML130/32-M3000?

Can someone please PM with service menu access for Panasonic GT25 (or VT25)? Thanks!

I too would like for some one to send me the SM codes for the Panasonic VT25 sets.
Thanks!

My first post too! I just got my 50VT25 today and I'd like the SM codes as well. Tanks.

hi ya,

I'm also looking for service menu codes. Please PM. Thanks.

Seasons Greetings!

I am looking for the Service Code for the Optoma HD65. Could someone PM me please?

Looking for service codes for Philips LCD TV 52PFL5704D 52" class Full HD 1080p digital TV with Pixel Plus 3 HD


Thanks.

I have a Sharp pg-a10x projector and need the service menu codes and instruction set to help correct an alignment problem. If someone would pm these I would greatly appreciate it.

I got the 65vt25 two weeks ago and would like the sm procedure. Thanks! :)

Looking for codes for Panasonic TC-L37D2. Thank You!

Me too. I keep seeing that the "Professional 1" and "Professional 2" modes are accessed by enabling ISFccc in the "Setup" menu.

Thanks!

Looking for service menu access code for Panasonic TC-P46G25. Could someone PM me please. Thanks in advance.

Hello,

I am looking for service codes for:
Panasonic TC-P50S2.

Please PM me if you have. Thank you in advance.

Can someone please tell me how to enter the Service menu on this model.

And can someone tell me there optimal adjustment.

Thanks

Can anyone help me with the ISF menu code for the Benq W6000? I calibrated it last year and would like to re-calibrate now, but I have lost the code.

Many thanks!

Hi i would like the service menu access for Panasonic GT25/GT24 (or VT25)?


please pm me
Thanks

Hi im looking for the service menu codes to gain access to the panasonic p37x20e Service menu..

Anybody got these

Thnx
SuperBilleN

Looking for service menu code/sequence for an RCA 24V414T. I've tried the "common" ones out there, but they don't work (maybe because this set was manufactured by TTE?).

Thanks!

Looking for ISF code for Benq w6000. PM please.

Codes requested please for panasonic VT25!!

TIA :)

Hi,

looking for service codes to a Panasonic TH-PZ850.

thanks

Hi,

looking for service codes to a Panasonic TH-PZ850.

http://www.avsforum.com/avs-vb/showthread.php?p=15966592&highlight=#post15966592

I have managed to power reset my way to an upside-down image. Can someone supply me with the service access code to correct? TIA

Thanks for any help.

anybody know the service code for a viewsonic v1930

Need service menu access for Vizio SV472XVT please. TIA.

Need Service Menu codes for Panny P54VT25 please. Thanks

Panasonic 42" LED
TC-42DL2 or (its little brother TC-37DL2)

Trying to disable the dynamic brightness

Can somebody please send me the service menu code for panny p54vt25. Thanx

Looking for the service menu code for a Toshiba 40E200U (technically the 40E20U, but I believe these are the same units).

Anyone know service menu code for a Coby TFTV1525?

Edit: It's this TV: http://www.amazon.com/Coby-TFTV1525-15-Inch-Widescreen-Monitor/dp/B00369T01W

hi,

codes for Sony XBR 52hx909 please.

Need Service Menu code for Panny P54VT25 please. Thank you!

Need access codes for the following:
Panasonic P58s2

and
Pansonic P42G25

Any help is appreciated, thank you

Has anyone accessed the service menu for the 50PK550 using the serial port?
I found the following codes for other LG TV's but they don't work using the command 1&2 "mc".
0xFB 251 019 IRKEY_IN_START
0xFF 255 274 IRKEY_EZ_ADJUST
Can anyone tell me how to execute them correctly?

Well, I'd like to know how to access the service menu on a Fujitsu monitor, in this case the P24W-5 eco. I'm really hoping someone here can help. :cool:

Codes requested please for panasonic VT25!!

Thanks.

Looking for service access to RCA 36v430t please.

Thanks!

anyone know the service menu numbers for Sony Bravia KDL-32BX400 thanks

hi,

codes for Sony XBR 52hx909 please.

Any news, I have a 46 incher and looking forthe same....please!!!!!

PM me, thanks!

Hi,

Looking for the TC-P58S2 Panasonic Plasma Service Menu Code.
PM me if you can

Thank you in advanced,
-David

Hello

I am looking for ISF Menu code on the BENQ W6000
Please PM me.

Thanks in advance

Looking for access to the service menu on my new pn58c6500. Searched all over and can't find it anywhere. Thanks for the help!

Hello

I am looking for ISF Menu code on the Optoma HD2200 if someone has it.

Thanks in advance

Need "secret service code" inside of service code for Toshiba XV640u. I have the standard one, just need the one to un-grey the Source Calibration box. Thanks!

Hello

I am desperately looking for the ISF Menu code on the BenQ W6000
Please PM me.

Thanks

I'll be calibrating a Runco Q750i soon and would like the code to access the ISF mode(s).

Thanks much.

Looking for the service menu codes or access method for a Westinghouse model LTV-40W1. Thank you!

Hi, I'm unable to find the list (as per top post in the thread), but i need the service menu access code for a Panasonic TH-42PX80U plasma.
Thanks in advance!

Hi, I'm unable to find the list (as per top post in the thread), but i need the service menu access code for a Panasonic TH-42PX80U plasma.
Thanks in advance!


You'll find it in one of the links in this post. Good thread for the px80u, BTW.
http://www.avsforum.com/avs-vb/showthread.php?p=13569687#post13569687


Larry

looking for the access codes for a 54vt25. thanks

Looking for codes for Panasonic tx-p42gt20e. Thank you in advance.

LG 50PV450 Would like to check hours on new set and access other menu functions.

Thx

Looking for service menu codes for a Panasonic 50pz700u. I'd like to check hours. Thanks in advance.

I am looking for VIZIO XVT3D554SV service menu code...greatly appreciated..

Looking for tcp65s2 codes, thanks!

I would like to use the isf functions on my Benq W6000. Please give me a p/m. Thanks already!

hi
I am also looking for ISF Menu code on the BENQ W6000
if someone can pm me
thanks in advance

May I request the Vizio VF551XVT service menu codes? Thank you much.

Looking for Service Menu Access code for a:
TCL L32HDF11TA, please.

I'm looking for the service menu for my viewsonic N3250W.
If anyone finds it and can let me know I thank you.

Sony 55NX810 please.

Thanks in advance.

Hey guys need some help, according to the service manual of my TV.
The Sharp Aquos LC30HV2U

I should be able to enter the service menu by doing the following,

Using the system cable, properly connect the LCD Display Unit and the AVC System. Turn ON the power while holding down the INPUT and VOL DOWN buttons located the LCD Display Unit.

But for some reason while doing the above, the tv just starts up normally and I have no service menu or small K as I read here on the forum other sharp tv's have.

Does anyone have a suggestion on why I can't seem to be able to enter the menu ?
Hope someone can help!

After many failed attempts and consistently dealing with imbeciles over the matter, i've had no luck with obtaining the service menu code for the:

Dynex™ - 40" Class / 1080p / 60Hz / LCD HDTV

DX-40L260A12

I'd be very grateful to whoever can help me out with this!

After many failed attempts and consistently dealing with imbeciles over the matter, i've had no luck with obtaining the service menu code for the:

Dynex™ - 40" Class / 1080p / 60Hz / LCD HDTV

DX-40L260A12

I'd be very grateful to whoever can help me out with this!

Don't know about your particular model but many Dynex SMs can be accessed by pushing the remote control input button followed by 2,5,8,0. It works on mine.

Don't know about your particular model but many Dynex SMs can be accessed by pushing the remote control input button followed by 2,5,8,0. It works on mine.

no luck :(
thanks anyways

edit:
Just found out the code for my model!

Despite having run across it on numerous occasions i simply didn't have the good sense to press the ENTER button right after!

For anyone else who wants to get into the SM of their DX-xxL260A12
all you have to do is:

Press Menu
Press 1,9,9,9
Press ENTER
Voila!

service code for a Proxima 6850 anyone?

Sony 55NX810 please.

Thanks in advance.
The sequence I've seen for other Sony's seems to work for the 55NX810:

Display, 5, vol+, power on

I did notice you have to be pretty quick. Once you get in, I've read something about 1/4 to move around and 3/6 to change values. 2/5 seemed to do something else. Beyond that, I can't figure out anything. :-(

I know how to access the Service Menu of my PS51D550 but I have some SM related questions.

The Movie mode White Point settings are grayed out when the TV is in the default Dynamic mode (it's always resets to Dynamic when I turn on the TV with SM).
I found a trick how to change to Movie mode -> I started to feed it with 3D signal and the default picture mode for 3D is Movie. The Movie WP settings aren't grayed out with 3D signals but I am still unable to change the values.
It seems to be locked or it's because I am in 3D mode. I don't know, but I would know:

- How can I change the picture mode (Dynamic, Standard, Movie) while I am in the SM?
- If it's still locked then how can I unlock the Movie WP settings?

The whole Expert menu is also grayed out. I don't really need that but if somebody know how I can unlock it than don't hesitate to share the knowledge with me. :)

Hey all, looking for the code for an Acer AL2216W. I've had an issue with PS3 overscan that I've been hoping to fix for a long time now. I know that someone asked for the code way back in the thread, but I've been unable to find it :(.

Vizio E550VA, please. I've searched high and low through this forum as well as the Internet in general, and all of the general Vizio model service menu codes (including combinations of the CH+/CH- keys on the side of the tv) don't seem to work. If anybody has the code known to work specifically with the Vizio E550VA (or I'd suspect / hope that any ExxxVA model will use the same code) it would be greatly appreciated.

-D

Looking for Panasonic th-42px60u

Thanks in advance.

Justin

Looking for Service Menu Access code for a:
TCL L32HDF11TA, please. Also looking for TCL, 40FHDP21TA

Hi - Can someone please share how to access service menu for Panasonic p54vt25


please pm me
Thanks in advance

Does anyone know service menu codes or a link to where I could find the service manual for a Westinghouse LD-4655VX led LCD? Thanks.

Panasonic TCP42GT25 - thank you!

Westinghouse LTV-32w6

Thanks so much in advance. Replaced the mainboard; the replacement displays the image upside down, need to access the service menu to adjust the orientation.

Can someone PM me the access codes to turn on cal-day and cal-night on a VT30?

Do I have to connect via rs232 to gain access?

Cal Day & Cal Night are Samsung modes enabled in the service menu.

Cal Day & Cal Night are Samsung modes enabled in the service menu.

I may be using the wrong terminology then... ISF day/night?

Point is I just got calman and equipment. I've been trolling the forums for some detailed info but it's spotty at best. I do not know how to lock modes on a Panasonic and would like to be able to set a day/night for a VT30. I've been allover looking to access codes and found the one that involves pressing the vol button and other key strokes and I've found how to access hotel mode but I've not found how to open and lock the ISF modes.

Any help would be great. I'm very new at this aspect of HT and really want to get very good. Thanks again.

I may be using the wrong terminology then... ISF day/night?

Point is I just got calman and equipment. I've been trolling the forums for some detailed info but it's spotty at best. I do not know how to lock modes on a Panasonic and would like to be able to set a day/night for a VT30. I've been allover looking to access codes and found the one that involves pressing the vol button and other key strokes and I've found how to access hotel mode but I've not found how to open and lock the ISF modes.

Any help would be great. I'm very new at this aspect of HT and really want to get very good. Thanks again.

It requires the use of a software program & a PC to access the ISF modes on the VT30. You can purchase either a ControlCAL license to do it, or upgrade your version of CALMan, to a commercial or Pro version.

There is no freebie way to access the ISF modes on the VT30's

It requires the use of a software program & a PC to access the ISF modes on the VT30. You can purchase either a ControlCAL license to do it, or upgrade your version of CALMan, to a commercial or Pro version.
.
There is no freebie way to access the ISF modes on the VT30's

Cool.
So I'm running calman 4.2
what commercial/pro version do I need and what do you expect the cost would be?

Cool.
So I'm running calman 4.2
what commercial/pro version do I need and what do you expect the cost would be?

To upgrade from the Home/DIY version of CALMan to the Expert version, is $1,295.00


I don't know if you have paid any attention to the monthly emails that Spectracal sends out to their customers or not, but they have had special discount offers in the past. So you may want to email Spectracal/CALMan, and see if they can perhaps offer you any better options price wise.


Going with the ControlCal option is probably the lowest way to go as far as addition cost outlay over what you already have spent, for that you have to contact Turbe at controlcal.com.

Thanks for your help.

Anyone have the service access code for the Runco LS-5..

I need the code for a Vizio M420NV LED TV

Does anyone know the service code for the Coby TFTV2425? I would really appreciate it!

Anyone know a pass code for a CL-710 long throw.

Greetings!

Can someone please PM me the service menu code for a
Vizio XVT3D474SV?

UPDATE: 11/14/11 Forget it. I got into it. It is of no use. It doesn't give you anymore than is at your finger tips in the regular menus...

Could someone please pm me the service code for sharp LC-XXLE820UN

Thank you.

Please help!

I have Samsung Tv, model le40c530 and I want to enter advanced settings in the service menu but I don't know the code. I tried 0000 but it doesn't work on this model. I want to turn off dynamic dimming.

Looking to get into Service Menu... For some reason HDTV Channels over QAM Tuner are displaying... Hoping this is something I can adjust in the Service Menu... Channel Scan picks the channels up, but displays blue screen & no audio/video message.

Thanks

Most likely that's an issue with your antenna.

Hi. Does anybody know the service menu code for a Ask Proxima DP8000?

If I could get the service menu code for a TCL LE40FHDP21TA I would be ecstatic! Thank you!

Please help!

I have Samsung Tv, model le40c530 and I want to enter advanced settings in the service menu but I don't know the code. I tried 0000 but it doesn't work on this model. I want to turn off dynamic dimming.

Looks like you are having the same problem that is present on D7000 and D8000 NA PDPs, the advanced menu is broken. When '0000' is entered the SM resets but no items are displayed under the advanced tab. There is a way to run the advanced menu using the serial debug port, samygo.tv has more information on these methods for various samsung flavors.

Hello all!! Just purchased a Samsung PN43D450 about a week ago. I've read extensively about the "burn-in" period (first 100-200 hrs) and I'm curious to know what my panel hours are. Could someone PM the service menu code. Thanks in advance...

Looking for service menu access for a Panny TC-P42X3. Anyone have those laying around? :)

Could someone please PM the service code for NEC 50XR5a, I dont have an edit button on my remote.

Looking for the access codes for Zenith z50pv220, which, I think, is a re-branded version (with reduced features) of LG 50PV450.
I have tried keeping the "Menu' button on the TV itself, as well as on the remote, (and both at the same too), without any success.

Thanks.

edit: I did find the "Host Diagnostic" screen to investigate the signal quality of a problem channel.
1) Place Television on the digital channel that may be showing problem.
2) Bring up the Menu. Highlight “CHANNEL”. Press “ENTER” on the remote.
4) Press the (1) Key 5 to 8 times.
The Host Diagnostics screen appears.

This screen shows the Model #, Firmware version, and DTV SNR (Digital Television Signal to Noise Ratio)
Over the Air: 8VSB Above 20 is good
Cable Digital: QAM64 (Above 24 is good)
Cable Digital: QAM 256 (Above 30 is good)

I'm looking for the service menu code for a Philips 40PFL3705. The typical service menu codes for Philips tvs don't seem to work on this one.

I'm looking for the code for a Viore LED22VF50

Access to Westinghouse service menu would be much appreciated. I'm with a LD 4070z. Thanks in advance.

If anyone knows the password to access the Benq w6000 ISF menu, can you PM me the password.

Thanks.

I got tinkering around with the service menu as provided in an earlier post for a Dynex 32" LED TV Model: dynex DX-32E150A11

Press Menu
Press 1,9,9,9
Press ENTER

Using the above procedure, I was able to access the SM and for some weird reason I homed right in and selected the arrow right for "burn in mode" function in the SM . Stupid me, the TV is now locked into the VGA mode and now I can no longer access the regular menu or SM on the TV and no other functions work on either the TV bottons or remote....I cannot even power the TV off unless I pull the plug.....I left it unplugged for about 15 mins hoping that would "reset" but it didn't work .I am using as a computer monitor....does anyone know how I can either re-access the service menu to turn this "burn in mode" off? Or how I could reset this TV to factory setting?

Have I permanently ruined this TV ?

Any help would be appreciated. . . Thanks

:confused:

This is exactly why you should be very carful in service menus and only play with what you know... Try putting a 100% white field up on the screen and see if that switches the TV back. If not you may be out $300, just be happy this didn't happen on a VT30 or D8000

This is exactly why you should be very carful in service menus and only play with what you know... Try putting a 100% white field up on the screen and see if that switches the TV back. If not you may be out $300, just be happy this didn't happen on a VT30 or D8000

Hi m-heat

I know, I am embarrassed by this situation....I have always been bold in updating firmware for my cell phones, DVD and Blu-ray players and other electronics.....when I stumbled upon the SM access code, I thought I would take a peek in the SM and voila, I picked the option of death!! LOL

I'm not sure what you mean by putting a 100% "white field up on the screen? Could you explain how I would do that? No buttons or input switching options work on the TV...I can only use as a monitor on my computer as that was the mode I was in when I made this stupid move! The only way I can turn this TV off is by unplugging it. I left it unplugged for over 24 hours and that didn't "reboot" it.

Appreciate any more advice or guidance you or anyone else could offer.

Thanks so much! :)

Sent a full white picture to your TV. Problem is you may need a test pattern generator.

It's an off hand thought. Good luck.

Like use photoshop create a white image the same resolution as your screen ie 1366x768... Etc.

Make sure the white is full white like 235

Like use photoshop create a white image the same resolution as your screen ie 1366x768... Etc.

Make sure the white is full white like 235



Thanks for the speedy reply m-heat......unfortunately, I'm still not following? I don't have Photoshop...not sure how I could create a white image using my screen resolution with white like 235?

Is your thought that the menu is coming up when I try to access it, but I can't see it? SOrry, I'm just not clear how I can do this? Is there any way you could send me a "white screen image" if I PM you with my email?:confused:

Some TVs need a test pattern sent to them to exit out of some features in the service menu. Samsung is a good example of this.

Since you went into burn in I felt a full white screen might work.

When I say 235 I mean that computer monitors show black to white in steps from 0-255 and TVs are supposed to show from 16-235 buy putting a full white screen up you may trick the TV into exiting the burn in test.

Thanks m-heat......I have the Dynex TV connected as a monitor to my desktop computer.....and oddly, now that I have accidentally set the TV to "burn in mode" in the SM, instead of the monitor shutting down after prescribed time and going to a blank black screen and eventually shutting off, it oddly goes from a full green to a red screen to a blue screen to a white screen and then finally to a black screen and repeats the color sequence all over indefinitely staying on each color for about 5 seconds. I tried to access the menu while it was on the white screen but it didn't seem to work.....

I know sometimes if you unplug the TV and press and hold a certain button as you are plugging it back in, depending on the brand, it will re-set to factory shipped settings.

I have certainly learned a valuable lesson here...never ever modify anything in the SM unless you know what you are doing ! :o:o:o:o

Thanks again m-heat for your courtesy in attempting to help me out. If you can think of anything else, I'm all ears.


P.S. I am currently in communication with the Dynex support via email. They don't understand the issue...they claim there is no "burn in mode" in the menu. I did confess to Dynex support that I went into the SM and they still can't understand what I did. I am trying to get the original factory firmware for this Dynex DX-32E150A11 32" LED but they claim it will not resolve the issue. They claim that I can unplug for 10 minutes then when plugging in again, press and hold the power button for about 40 seconds then release and that should "recycle" or reset the TV......this does not work.....as soon as I plug it in again, the TV immediately comes right on without any button or remote intervention from the user!

Regards,

does anyone have the service menu codes for a vivitek h5080?

tia.

looking for the service menu access code for a:
Westinghouse LD-4258

Thanks :)

Hi,

Looking for service menu codes for a Mits WS-65413.

Thanks in advance.

I'd love to know how to get into the LG 42LV4400 service menu. I tried using the Pronto Code that works with most LG TV's, like on my 42LH90, but to no avail!

Please if anyone knows how to access the service menu for an LG 37LC5DCB.

Thanks

Why do you need access to LG service menu? All calibration controls are nested in expert1/2 mode for display calibration.

Thanks m-heat......I have the Dynex TV connected as a monitor to my desktop computer.....and oddly, now that I have accidentally set the TV to "burn in mode" in the SM, instead of the monitor shutting down after prescribed time and going to a blank black screen and eventually shutting off, it oddly goes from a full green to a red screen to a blue screen to a white screen and then finally to a black screen and repeats the color sequence all over indefinitely staying on each color for about 5 seconds. I tried to access the menu while it was on the white screen but it didn't seem to work.....

I know sometimes if you unplug the TV and press and hold a certain button as you are plugging it back in, depending on the brand, it will re-set to factory shipped settings.

I have certainly learned a valuable lesson here...never ever modify anything in the SM unless you know what you are doing ! :o:o:o:o

Thanks again m-heat for your courtesy in attempting to help me out. If you can think of anything else, I'm all ears.

P.S. I am currently in communication with the Dynex support via email. They don't understand the issue...they claim there is no "burn in mode" in the menu. I did confess to Dynex support that I went into the SM and they still can't understand what I did. I am trying to get the original factory firmware for this Dynex DX-32E150A11 32" LED but they claim it will not resolve the issue. They claim that I can unplug for 10 minutes then when plugging in again, press and hold the power button for about 40 seconds then release and that should "recycle" or reset the TV......this does not work.....as soon as I plug it in again, the TV immediately comes right on without any button or remote intervention from the user!

Regards,

So you are holding power before and during plugging in the TV then releasing it after 40 seconds?

hi M-heat....yes, I have tried your suggestion of holding power button and holding when re=plugging in....along with several other options...and still no luck, It works as a monitor but just won't respond to anything or go into sleep mode until unplugged...fortunately, the AC cord is easy to access on the back of the LED TV

mheat,

I just spoke with LG customer service who informed me that the 42 and 47 inch versions of their lv4400 series don't allow TruMotion to be turned off. I get motion sick from time to time and found it happening to me during Saving Private Ryan's beach scene. The CS rep mentioned that this TruMotion is likely able to be disabled within the service menu, but that he didn't know (nor would be allowed) to help me access it. He agreed that turning TruMotion off would be beneficial. These are the best led LG tv's for those of us not interested in internet and on a seriously tight budget. The lg 55lv4400 does have an option allowing TruMotion to be turned off.

The CS rep guided me toward the LK 520 series and mentioned it was similar...more expensive, more inputs, better contrast ratio, and TruMotion can be turned off in the 42 and 47 inch models.

I'm wanting to go with the lg 47lv4400, but want to hit the service menu to turn off TruMotion. Might this be able to be done?

Your time is much appreciated.

hey looking for the service menu codes for a PRIMA PS-42D8V3 any chance you could help me been looking everywhere and cant find anything
thanx

I need the service menu codes for an Optoma HD73. Please PM with any information. Thanks Kerry

Looking for service menu code for a Westinghouse vr-4625 any help would be appreciated.

The CS rep guided me toward the LK 520 series and mentioned it was similar...more expensive, more inputs, better contrast ratio, and TruMotion can be turned off in the 42 and 47 inch models.

I'm wanting to go with the lg 47lv4400, but want to hit the service menu to turn off TruMotion. Might this be able to be done?

Your time is much appreciated.

TruMotion can be turned off, sort of. The LG will still take the 60fps and double it (showing each frame twice) to mimic 120fps. All turning TruMotion off will do is eliminate or greatly reduce the SOE. And you should never get into the service menu unless you know exactly what you are doing. It's very easy to brick your set and if you do, LG won't help you at all. That's probably why the CS was reluctant to lead you in that direction. I have the 47LD520.

Trying to find the Service menu code for the LG PT350 plasma. I'm dieing to find out if i can turn off this annoying 'Auto Brightness' :p

Hello,
I am looking for the service code for the Insignia 32" LED LCD NS-32E740A12.

I have searched, and all ready tried (without luck) these posted methods:

Pressing on remote: {2}{5}{8}{0}

Also tried:

Power on the set.
Adjust the volume to zero
With the remote - Input 9876 - then OK within 5 seconds.

Also tried:

Try:
TV POWERED OFF
MUTE
1
8
2
POWER

Any input would be much appreciated. Thanks!

looking for LG 32LK450 access code, Thanks. Tried to use search but no match.

looking for LG 32LK450 access code, Thanks. Tried to use search but no match.

Are you trying to do white balance in the SM?

Is it possible to enter the service menu on a 2011 LG TV with the user remote control? I have the service manual for my LK450 and want to access the EZ ADJUST mode to dial in white balance for the warm color temp preset to exactly D65. I know the user menu has every setting you could want to calibrate the TV but I want the white balance settings to stick even after a picture reset or "initial setting" reset in the user menu.

Is it possible to enter the service menu on a 2011 LG TV with the user remote control? I have the service manual for my LK450 and want to access the EZ ADJUST mode to dial in white balance for the warm color temp preset to exactly D65. I know the user menu has every setting you could want to calibrate the TV but I want the white balance settings to stick even after a picture reset or "initial setting" reset in the user menu.

You can lock the expert modes. I just sent you a PM

How about accessing the service menu for an Emerson LC320EM1F? Thanks guys!

Edit: And for the record, I did search this forum, finding only one post about taking the remote control apart and adding a jumper... Which did not apply to this model TV nor remote control... I also looked for a hidden button under the remote control casing (as mentioned elsewhere), and found none.

Looking for service menu codes for Westinghouse LD-4080

thanks!

Hi all,

I'm looking for the service code for the NEC E461 LCD.
I suppose there is a common code for these NEC displays...

Remote control model is RL57Q-2

Would be much appreciated.

Toshiba 65ht2u service code?

Service Menu access code for a Samsung PN43D490?
Thanks,
Bill

Looking for Service menu access code for Optoma Hd33

Thanks

I guess I'll just post this for my own records, just to say I tried to find the service menu:

Mitsubishi DLP Projector
Manufactured M1KY
Serial 0002565
Model HC100

Anyone have this projector's service menu (or at least some access to color management or luminance controls?)

Hey

I am looking for ISF Menu code for the BENQ W6000 and hopefully where/when to enter it
Please PM me.

Thanks in advance

Mike

I accessed the service menu via the hold menu on remote + on TV trick for my LG M3701C, I saw the "overscan" option under "system control 2" which was at 5% by default. I was so happy that I found the option, and set it to the lowest which was 1% but it did not do anything for my HDMI image overscan problem (using a PS3).

Anyone know how I can fix the overscan issue for this old monitor? Also, what are the ideal image settings for this?
Under system options there is also the "system" setting which is at "4-sys" by default. It changes the colour a bit, should this be left alone or should I switch it to NTSC (one of the available options) since I am in North America.

This overscan problem has really bothered me, so I am really hoping to fix it.
Any help would be much appreciated.
Under the system control option are these menu options:

System: 4-SYS
Overscan: 1% (was 5%, doesn't appear to do anything for my HDMI image)
RS-232 Host: PC (no idea what this is)
Baud Rate: 9600bps
RS-232 Select: New
AGC-L: 243 140
Audio Delay: 0



Also, is there another service menu available? When I held down the menu button, a password input box appeared and I tried entering 0000 but it was incorrect. Maybe that is just for the parental controls or something. :/

Can you provide the service menu remote control codes for the following Sony TV's

1. xbr 55hx929
2. kdl 46xbr2 and kdl 52xbr2

Thanks!

Jim

Can't seem to find the BenQ W6000 ISF access codes anywhere on the internet. I would greatly appreciate them! PM please, thanks!

Looking for info on the service menu for a Toshiba 32DT2U. Thanks!!

Looking for access code/process for service menu on a OLD CRT Insignia NS27RTV.
Thanks!

Hi all! I want to access the service menu on the 42LW5300 with a Monster AVL 300 remote. Is this possible? I've read all related websites and still have no clue since I do not understand remote language. I can go out and buy another remote but that would defeat the purpose of an all in one universal remote. Help is greatly appreciated!

Looking without success for the service menu access procedure for a 2007 Trutech T2000-FT.
Thanks in advance..

Hello
Looking without success for the service menu access procedure for a Yamaha DPX 1200
Thanks in advance..

Hello
Looking without success for the service menu access procedure for a Yamaha DPX 1200
Thanks in advance..

Don't hold your breath, I have yet to get a response for anything I have requested..
Good luck!

Hello,

I'm looking for service menu access codes for Optoma EP780/TX780 DLP projector. This one is hard to find. Any help would be appreciated.

Thanks.

Hi!

Looking for service menu code/access for Olevia LT26HVX please.

Thanks! :)

Means by which to access the service menu on the Sharp Elite 70" would be greatly appreciated. Thanks!

I could really use the service manual for the Panasonic TH-50PHD5UY if anyone happens to have it.

My email is nick [at] nickplee [dot] com

Thanks!

I am looking for service menu access for a 2004 RCA 27V530T Chassis ITC008FBK Please oh please. Warm is very close to correct but with a slight adjustment of gray scale this set will be great for mom!

I could really use the service manual for the Panasonic TH-50PHD5UY if anyone happens to have it.

My email is nick [at] nickplee [dot] com

Thanks!

The SM really doesn't have much info on calibration sorry. It's more a repair manual. That being said you can find it for sale via some googling.

I'm looking for the service menu access code for SHARP AQUOS LC 26D40U. Thanks in advance. I'm having the green artifact described previously as "green rasta" with patches of fluorescent green on people's faces and background. PM me please if you have any solutions or the service menu code.

Thanks.

Hello,

I have two models of LG LCD's LG 32lk450 and 32lk430, and i need some help to get into the service menu to modify the "Keyless Off Hours" option. This option turns off my LCD when nobody uses it for like 2 hours (this occurs only when the tv starts automatically at a given time).

Thx in advandce.

Samsung UN22D5000
Need codes to access further in the SM for "colormapping".
When I enter colormapping there are no values or settings. I believe there is still a higher "FACTORY" code. Any help is appreciated!!

Samsung UN22D5000
Need codes to access further in the SM for "colormapping".
When I enter colormapping there are no values or settings. I believe there is still a higher "FACTORY" code. Any help is appreciated!!

I'd be interested in this as well. If anyone can PM me a simple FAQ for this it would be very very cool.
Thanks.

Hello
I'm looking without success for the service menu access procedure for a Optoma SP8604 or Vivitek H5082
Thanks in advance..

Hi Looking for a service menu access for OPTOMA HD81 - this is the one with the separate scaler, I have tried

down down left left down left from remote while a source is playing but that did not work?

Please advise what the key press could be and from what menu etc,

Many
Thx

looking for service menu access for vizio VO42L

The three i have seen have not worked

Thanks in advance

I'm looking for the service menu for Toshiba 37BV701 G (LCD TV Set).

I found somewhere that the combo - Menu -> highlight Picture -> Press 9301 -> OK will give the service menu but it doesn't seem to work on this set.

Please anyone have the service menu code for LG 55LV4400,,,,led reallly need the code to try to calibrate this myself..

Please anyone have the service menu code for LG 55LV4400,,,,led reallly need the code to try to calibrate this myself..

you don't need to access the service menu to calibrate an LG

try the ISF Expert1/2 modes in the user menu instead

Please anyone have the service menu code for LG 55LV4400,,,,led reallly need the code to try to calibrate this myself..


it doesnt have this its a new menu and it doesnt have expert and what your saying its just movie standard vivid game thats all...thats why i asked so if anyone knows the service menu code please can i have this thank you.

no expert mode just checked.... my sons older LG has this but not this model if anyone has had experience with this model please let me know thank you again.

The 4400 does not have white balance adjustments even in the service menu. All you can do is user panel adjustments.

The 4400 does not have white balance adjustments even in the service menu. All you can do is user panel adjustments.


can i have the service menu code if you have it? did you go to service menu and see it then you can share the code if you like thank you.. if i get an isf calibration done to this model will it make a difference? thankz again.

The only options for calibration on this TV are user panel adjustments of contrast and brightness/black levels. The white balance controls in the service menu are not accessible/changeable. Even with an ISF calibration they are not able to adjust that. I am an ISF certified calibrator. I'm sorry to give you bad news.

Looking for service menu code for a Polaroid TLAC-02255.

I'm trying to turn off the horrible HDMI picture processing, which seemingly can't be done in the regular menus. I've tried all the other Polaroid codes in this thread.