View Full Version : Wireless Router Poll (read even if not using currently)


Pages : 1 [2] 3

Tripjammer
02-12-07, 04:28 PM
I have a Dlink 784 a/b/g router in my setup. My friend has a Belkin N1 (it works as you can see from my post)

Anyways he gets a 50 to 57 percent signal strength.

I get a 90 to 97 percent signal strength...

Now my Dlink 784 is located on the second level in my computer room. I have 20 foot cellings so from the computer room down to the PS3 room (the great room) it is wide open. I have my Xbox 360 on the 802.11a wireless network of the DI-784, and I have the Wii on the 802.11g, along with 2 laptops. I have my PSP and Tivos on a seperate wireless network that is b, so there is nothing to interfere with my G and A wireless networks.

I get about 90 to 100 percent signal strength on all devices. in my house.

What signal strength are you guys getting on a Dlink pre N or Belkin N1?

ppshooky
02-16-07, 01:06 PM
On my work laptop (g) I get Fair-Good from my den (1st floor) to my enclosure (2nd floor, my closet) with my Dlink DIR-655. My den is pretty much on the other side of the house from my enclosure.

If I move my laptop to my family room, which is directly below the enclosure, and where my PS3 is, I get Good-Excellent.

My fiance's laptop (b), before it broke, was getting Good-Excellent from my den, and Excellent from the family room.

Since I have CAT5e cables running through the walls from my enclosure to the den and family room, I have have no need to test my PS3's wireless signal. I can, if you'd like to know how well the DIR-655 wireless/PS3 connection works (I have a lot of security settings and it's tedious work to get the laptop on there).

Tripjammer
02-16-07, 01:12 PM
Lets talk about wireless router channels...There are some people who are downloading from the PS store the demos in 10 mins, while some people are taking about 3 to 4 hours...

I have my Dlink 784 set to channel 6...i am getting OK download speeds like 1 hours for the motorstorm download.

I am thinking of setting up my Dlink 784 to go regular G and set the channel to 11 and see if my download speeds are faster.

I heard channel 11 is faster...can anybody test and confirm?

I will work with my friend who has the Belkin N1 and see what channels are faster. He is also getting slow DL speeds from the PS store, like 1 hour for the Motorostorm demo download.

ppshooky
02-16-07, 01:47 PM
I've been told channel 11 and, I think, 6 or 9 were the channels that would have the least amount of interference.

Do you or your friend have any wireless phones in the house?

Tripjammer
02-16-07, 03:27 PM
I've been told channel 11 and, I think, 6 or 9 were the channels that would have the least amount of interference.

Do you or your friend have any wireless phones in the house?

Kenporyu is another PSN user who has a PS3 60GB and a working Belkin N1 router. He has slow download speeds. I just found out his channel setting on the N1 is at 40MHZ which is wrong if you have no PreN devices on the network with the Belkin N1. The only wireless device he has is the PS3.

At my house I have a 5.8 GHZ cordless phone but it is turned off.
I have a Dlink 784 that is on channel 6.

At Kenporyu house who has a Belkin N1, he has no cordless phones.

I just read the Belkin N1 manual... The following two settings should be set, since the PS3 is 802.11g:

Protected Mode Switch = ON
Using the Bandwidth Switch = 20MHz/40MHz Auto


Protected Mode Switch = ON
Protected mode ensures proper operation of N1, draft 802.11n-compliant devices on your wireless network when 802.11g or 802.11b devices are present or when there is heavy 802.11g or 802.11b traffic in the operating environment. Use protected mode if your network consists of a mix of Belkin N1 Wireless Cards and 802.11g or 802.11b cards on your network. If you are in an environment that includes little to no 802.11g or 802.11b wireless network traffic, you will achieve the best N1 wireless performance with protected mode OFF. Conversely, in an environment with HEAVY 802.11g or 802.11b traffic or interference, you will achieve the best N1 wireless performance with protected mode ON. This will ensure N1 wireless performance is not affected.


Using the Bandwidth Switch = 20MHz/40MHz Auto
This switch allows you to set the Router’s wireless bandwidth modes. There are several modes available:
1) 20MHz onlySetting the Router to this mode allows only 20MHz operation. This mode is compatible with N1, draft 802.11n-, 802.11g-, and802.11b-compliant devices, but will limit N1, draft 802.11n-compliant devices’ bandwidth by half. Reducing bandwidth to 20MHz-only operation might solve some wireless problems.
2) 40MHz onlySetting the Router to this mode allows only 40MHz operation. This mode is compatible only with N1, draft 802.11n-compliant devices. It may affect legacy 802.11b/g devices. Use only when you have a pure N1, draft 802.11n wireless network.
3) 20MHz/40MHz AutoSetting the Router to this mode allows it to switch automatically between 20MHz and 40MHz operation. This mode enables 40MHz operation, to maximize speed for N1, draft 802.11n-compliant devices when conditions permit. When a legacy 802.11g access point is presented and occupies an adjacent secondary channel, the Router automatically reverts to 20MHz operation to maximize compatibility. We recommend using this as the default mode.



Using the Access Point Mode
Note: This advanced feature should be employed by advanced users only. The Router can be configured to work as a wireless network access point. Using this mode will defeat the NAT IP sharing feature and DHCP server. In Access Point (AP) mode, the Router will need to be configured with an IP address that is in the same subnet as the rest of the network that you will bridge to. The default IP address
1. Enable the AP mode my selecting “Enable” in the “Use as Access Point only” page. When you select this option, you will be able to change the IP settings.
2. Set your IP settings to match your network. Click
“Apply Changes”.
3. Connect a cable from the “Modem” port on the Router to your existing network.
The Router is now acting as an access point. To access the Router’s Web-Based Advanced User Interface again, type the IP address you specified into your browser’s navigation bar. You can set the encryption settings, MAC address filtering, SSID, and
channel normally.

talbain
02-18-07, 11:39 AM
I have the netgear 624v3 and noticed if I set it on G only/or G and B only/ the downloads are really slow. If I set the router on b-only- downloads speed up drastically. Wireless b should be plenty fast anyway if I am thinking right. It will do up to 11 Mbps-that should be plenty of bandwidth for almost any type of downloading from the internet. I doubt anyone is getting more than that from there ISP-if they are they are paying a pretty penny for it! I will have to do some more research with settings on my router but for anyone that is having slow downloads using wireless for the ps3 try setting your router to B-only and see if that helps.



SWEET JESUS!!!

you have solved my problem. linksys wrt54gl. wired connection is blazing fast, but when i enable wireless on the ps3 (or any other device) it drops down to turtle mode, maybe 1/4 of wired speed. i have had it in mixed mode (thanks to the psp), and when i switched it to g only had the same problem, which has been seriously bothering me for months.

after reading your post i switched it to b only and voila! wireless speed is now identical to wired (8mps d/l). i'd love to know why this is so, since logically it shouldn't happen. i have no wireless devices in the house except for the ps3 (b/g), psp (b) and a laptop (b/g) and my signal strength hovers in the 97% to 100% range. interference from other devices, like phones/microwave? wouldn't the signal strength drop if this were the case? i don't know. all i do know is that tingham has solved my slow wireless download speed problem, and i am very grateful! :D

Tripjammer
02-21-07, 05:00 PM
I hear you but this does not make sense. 802.11G should be faster.


I think I am going to get up a wireless 802.11n router to a 802.11n access point/bridge plugged into the PS3.

ppshooky
02-21-07, 06:04 PM
Though I haven't tested my wireless with my PS3, I'm pleased with the D-Link DIR-655 Xtreme N Gigabit Router.

Get a pretty good signal with my work laptop (g) and had an even better signal with my fiance's now broken laptop (b).

I'm sure wireless would work well the PS3, and I'm fairly certain that I could get it on my network with the multitude of security settings I have on the router.

tingham
02-21-07, 06:15 PM
Hey Talbain,

Glad to hear that my post solved your download speed problem!! I am thinking there might be a problem with the ps3's wireless "G ". I cannot test this issue due to I have no other "g" devices in my home. I have 5.8 ghz and 900 mhz phones so that is not causing a problem. It does not make sense. All I know is if I switch between "g" and "b"(b is ten times faster). Maybe someone else can chime in and let us know if their "g" is faster than "b"-Although it would be the same speeds if there ISP connection speed is 11 mpbs or less. I am still testing here-everytime I download from the store I change the router settings back and fourth and "b" is always faster. And I have downloaded everything in the store. All of my game demo downloads have taken about 20 to 30 minutes with the "b mode" with most in the 20 minute range-Acceptable to me for a 400 to 600mb file! If I use "g" it runs like a snail so I always cancel and switch the router back to "b-mode". I hope the ps3's "G" mode does not have a problem but it is the only explanation for me at this time that would be causing this issue!! I might get around to calling Sony on this but for now "b-mode" has solved my problem.

psychdoctor
02-21-07, 10:51 PM
You would think setting up a wireless connection would not be a nightmare but it was for me. I successfully set up two wrt54gs routers, one primary with linksys firmware 1.52 update and a secondary wrt54gs as flashed with dd-wrt v23sp2 micro. The secondary router is set to client bridge and I hard wire to PS3. The routers are 113 feet apart ("S" shape from modem to PS3 with mortar brick walls in between). and I consistently get 24-36Mbps.
PS3:
static IP
UPnP: enabled
ATRAC: enabled
DNS: same as primary router
default gateway: same as primary router.

Primary router:
Gateway
MAC enabled
MAC clone enabled
WEP security 128 bit
SSDI: enabled broadcast (must enable for bridge to recognize)
wireless channel 11 (on both routers)
NO port forwarding
NO DMZ
authentication type: auto
Firwall: uncheck block anonymous request and filter internet NAT redirection
Check multicast and IDENT (port 113)

Secondary router:
dd-wrt flashed with V23sp2 micro (2 mb file)
advance routing, operating mode: Gateway!
Network mode: G-only
WEP 128 bit
MAC Filter: enabled

If anyone wants specific instructions I can post a complete guideline on how to set up two wrt54gs version 6 routers to a client bridge network. Just let me know.

The Big Wood
02-22-07, 03:43 PM
Hey all....

I noticed last night when I updated the first page with an addition of a new router that we have all but 2 routers listed as working. I sincerely want to thank all that have contributed their router information and tweaks tips to get them working. Special thank go out to protoboard, who determined the disable SSID broadcast trick. Now about those last 2 routers. Has anyone gotten them to work with the PS3?

Belkin F5D8230-4
Linksys WRT54GX4

Join the thread if you have, I sure their are some here that would greatly appreciate it.

I can verify the Belkin F5D8230-4 (Belkin Pre-N) does NOT work with PS3.

This is even with a wired connection. I've had many problems with the PS3 signing in and out all the time, and I didn't realize I had a major problem until I tried to play CoD3 multiplayer. With the PS3 running wireless (with an excellent connection of 100%, router was in line of sight and about 25ft away), the multiplayer would not connect at all. So I connected the PS3 through my wired network, and it was able to connect to the multiplayer. I could only play in games with fewer than 8 people...anymore than that and lag was unbearable. There were many sessions that I could not join due to inability to connect to the host or all players. It seems that CoD3 uses a different networking strategy called host sharing that requires a good connection to all players, not just the host.

I tried everything I could to get my PS3 to work with the router, even in the wired condition. I had the latest firmware. I tried enabling uPnP (the Belkin defaults to disabled) which changed my NAT 3 to NAT 2 on the PS3 (I noticed I could log into games with up to 15 players, but I still had awful lag with more than 8 players). I then tried a static IP outside of my DHCP range. No change. Next, i tried port forwarding 3074 as recommended by Activision support. No change. Lastly, I tried the ultimate...putting the PS3 in DMZ. STILL NO CHANGE! :(

Next step, I used my old D-Link DI-604 that worked on Xbox Live when I played on my old Xbox. No port forwarding, no DMZ, no static IP...just connected the PS3 to the router and VIOLA! There is no game session I cannot access now on CoD3, and hardly any lag has shown its nasty head even with a full 24 players connected.

Just for a little more nails in the coffin for the Belkin router...my daughters' Nintendo DS's would not connect to it as well. Belkin tech support gave me a great line referring to the DS saying "your machine does not have a brain...you have to have a machine with a brain to connect to the router." :eek: Also, I could not access my network at my work so that I could VPN and work from home. The D-Link 604 allowed instant access, just not wirelessly.

I just purchased a Netgear WPN824 to see what it will do. Maybe I will have similar or better results as sorry_colts did.

Thanks for this list guys! You made me join AVS after trolling all these years! :o

ppshooky
02-22-07, 03:48 PM
Sounds like the router was having a lot of other issues. Are you sure it wasn't a defective router?

Mcklein
02-24-07, 11:10 AM
Hey Talbain,

Glad to hear that my post solved your download speed problem!! I am thinking there might be a problem with the ps3's wireless "G ". I cannot test this issue due to I have no other "g" devices in my home. I have 5.8 ghz and 900 mhz phones so that is not causing a problem. It does not make sense. All I know is if I switch between "g" and "b"(b is ten times faster). Maybe someone else can chime in and let us know if their "g" is faster than "b"-Although it would be the same speeds if there ISP connection speed is 11 mpbs or less. I am still testing here-everytime I download from the store I change the router settings back and fourth and "b" is always faster. And I have downloaded everything in the store. All of my game demo downloads have taken about 20 to 30 minutes with the "b mode" with most in the 20 minute range-Acceptable to me for a 400 to 600mb file! If I use "g" it runs like a snail so I always cancel and switch the router back to "b-mode". I hope the ps3's "G" mode does not have a problem but it is the only explanation for me at this time that would be causing this issue!! I might get around to calling Sony on this but for now "b-mode" has solved my problem.


where do you chage from g to b in the settings?

tingham
02-24-07, 01:14 PM
where do you chage from g to b in the settings?

You have to log-in to your router with a browser. It should be something like http://www.routerlogin.net. Each brand of router has a different log in so if you check your routers instruction manual it should tell you how to log-in to the router. Once you are logged in you go to wireless settings and change the mode there. After you change it make sure you click save settings.

The Big Wood
02-26-07, 04:20 PM
The Netgear WPN824 version 2 works great with th PS3 hardwired, even without making adjustments such as static IP, port forwarding, and DMZ. I did not try the wireless connection, though I could if someone wants me to verify.

I'm not sure if the Netgear WPN824 version 1 works. While updating the firmware during initial install, Netgear made it clear that Version 1 is discontinued.

Tripjammer
02-27-07, 09:54 AM
Has anybody made the call to Sony about the SLOW wireless G download speeds?

We need to call and tell them, so they can fix it in firmware...

Wagon Man
02-27-07, 03:41 PM
1. I used the USB apporach for the 1.51 update, works like a charm,, and WAY faster than my previous 1.50 update with PS3 directly connected to the cable modem.

2. ordered a 50 ft Cat6 cable from Newegg for less than $10 .. to save the running back & forth betwen basement and REc Room :D



That said, (as I mentioned there is a cable oulet in the family room), I relocated the cable modem there (as-need basis) and get the 1.5 update and the GT-HD and MotoStrom demo.... cool stuff.

However my biggest puzzle is ... the download speed is painfully slow.. even via wired connection??? I have MUCH BETTER speed on the basement with my computers ...

what's with PS3? Anyone experienced the same ? knows why?

I read someone about "update by USB port" is possible.. I might as well save the update file to a thumb drive .. should svae me 50%+ time .. but not sure if I can use the thumb drive for those demo tho ...

Egan
02-28-07, 10:51 AM
Hi guys,

I'm new to the wireless world. Just hooked up Linksys WRT54G, when I scan the PS3 picks up some area networks, but with mine is says "not supported". Signal strength is 75%. Have security settings on using WPA. Don't want to turn off security. Any suggestions?

Edit: would try using WEP but can't figure out how to change it

dogdoctor
02-28-07, 11:55 AM
You have to get into the router to change that information. Read the manual that came with it, they generally provide some guick start guide on how to hook it up and then access the router from a web page. Once in the router, you can modify passwords, names, frequency of transmission, types fo transmission (b or g or mixed), etc. The router will work fine pending the version number (check the bottom by the model number and check it to our list in post 1. If you have any problem setting it up call linksys support - I've used them on occasion and generally will get you going in the right direction.

Egan
02-28-07, 12:09 PM
Thanks dogdoctor, there was no manual to speak of, just quick setup stuff. I went into the web page but didn't see anything about how to change security settings, even under the security tab. And one of the networks the PS3 did detect was using WPA security and it did not say "not supported" for it under security column. I have v6, flashed to latest linksys fw.

dogdoctor
02-28-07, 04:31 PM
Thanks dogdoctor, there was no manual to speak of, just quick setup stuff. I went into the web page but didn't see anything about how to change security settings, even under the security tab. And one of the networks the PS3 did detect was using WPA security and it did not say "not supported" for it under security column. I have v6, flashed to latest linksys fw.
That's the router I have so I know it works. I think you just need to get it set up properly. I have set mine up at:

Static IP for the PS3 (set up in PS3)
(b) only transmission (there is another thread on this board as to why)
WEP (128hex)
DMZ for the PS3 IP address.

When setting up the PS3 is ran the manual configuration - it allows you to set a Static IP address. Among other things.

I wish I could explain this better. PM me with your phone number and I might be able to talk you through it on the phone after work tonight. I need to be infront of my system to better visualize the sections and how I did it. I'll be free likely at 9-10pm (PST). Unless someone else can jump in here an help you set up a linksys. I would really call Linksys though, they can walk you through a lot if you are a real noob at it.

PaulGo
03-01-07, 12:59 AM
URL=http://www.speedtest.net]http://www.speedtest.net/result/97753709.png[/URL]

This was done with a D-Link WBR-2310. On the upload speed it has always been about the same. However for the download speed I manually set the transmission rate to 54 mbits from the default "auto" setting in the advanced wireless menu. This caused the speedtest to more than double. I guess this unit falls back to a lower speed unless manually set at the maximum speed. (Using the latest firmware for the PS3 and the router.) Also the router was set to the g only mode. So it look like you can get fast speeds using g. I also am using WAP enhanced wireless security with the AES cypher type. (Updated test results)

seplant
03-03-07, 11:35 AM
I see the Netgear WGT624 v3 listed as a router that works with a PS3, but does anyone have it working with WPA security turned on? I can get mine to work only if I turn all security off. In fact, if I try to use WPA2-PSK [AES], the PS3 says it is unsupported. At least I can get it to say it supports WPA-PSK [TKIP], but when I get all the way through setup to test the connection, the key exchange times out (I'm sure my key entry is correct). Any ideas?

talbain
03-03-07, 01:04 PM
do you have the latest firmware installed for the router?

seplant
03-03-07, 01:31 PM
The router does a check and says it has the latest firmware available.

tingham
03-03-07, 10:59 PM
I see the Netgear WGT624 v3 listed as a router that works with a PS3, but does anyone have it working with WPA security turned on? I can get mine to work only if I turn all security off. In fact, if I try to use WPA2-PSK [AES], the PS3 says it is unsupported. At least I can get it to say it supports WPA-PSK [TKIP], but when I get all the way through setup to test the connection, the key exchange times out (I'm sure my key entry is correct). Any ideas?


I have the exact same router. I use WEP and have had no problems. I have not tried WPA but I guess I could switch to see if there is a problem with WPA. I live in a residential neighborhood and the homes are pretty far apart so I did not see a need for WPA. Did you try WEP?

seplant
03-04-07, 07:02 PM
I tried something even better....I replaced my Netgear router with a LinkSys Wireless-N router ;) . Plugged it in, and it worked right out of the box with no issues. So, You can add the LinkSys WRT150N to the list of wireless routers that work with the PS3!

joshmanley
03-06-07, 05:43 PM
i'm using a linksys router and my ps3 is about 20 feet away. I recieve about a 95% signal strength...clear line of sight through a doorway.

***EDIT***
I forgot the model number it is WRT-54GS

bdoyledimou
03-10-07, 10:38 AM
I have the Netgear WGR614.

Running without encryption, completly open , and with a 95% signal strength (with nothing else on the wireless network) my ps3 connection was at about 88 Kbps.

Hardwiring to the router, i suddenly get 5400 Kbps (as tested by speedtest.net)

Interesting to note that my upload speed remaind steady at 780 Kbps.

There is something seriously messed up with the wireless function of the ps3.

psychdoctor
03-12-07, 02:38 PM
You would think setting up a wireless connection would not be a nightmare but it was for me. I successfully set up two wrt54gs routers, one primary with linksys firmware 1.52 update and a secondary wrt54gs as flashed with dd-wrt v23sp2 micro. The secondary router is set to client bridge and I hard wire to PS3. The routers are 113 feet apart ("S" shape from modem to PS3 with mortar brick walls in between). and I consistently get 24-36Mbps.
PS3:
static IP
UPnP: enabled
ATRAC: enabled
DNS: same as primary router
default gateway: same as primary router.

Primary router:
Gateway
MAC enabled
MAC clone enabled
WEP security 128 bit
SSDI: enabled broadcast (must enable for bridge to recognize)
wireless channel 11 (on both routers)
NO port forwarding
NO DMZ
authentication type: auto
Firwall: uncheck block anonymous request and filter internet NAT redirection
Check multicast and IDENT (port 113)

Secondary router:
dd-wrt flashed with V23sp2 micro (2 mb file)
advance routing, operating mode: Gateway!
Network mode: G-only
WEP 128 bit
MAC Filter: enabled

If anyone wants specific instructions I can post a complete guideline on how to set up two wrt54gs version 6 routers to a client bridge network. Just let me know.
I also forgot to add an important step or occurence; after setting my routers to WEP security, both routers started blinking like crazy! I could get them to respond when changing information at the website. So then I unplugged them and replugged the power cord. That did nothing. Then, the important step, I had to plug or hard wire with ethernet cord the primary router into the port (NOT the ethernet port) of secondary router. Then I had to push the orange or lighted security area on the front of the router. Then I did the same thing for secondary router. Then both routers blinked for a while and reset security codes and wha la, it worked! :D

Anubis2005X
03-13-07, 11:20 PM
Can I just say, HALLE-FREAKIN'-LUJAH!!! My PS3's wireless was working fine, but then started having troubles. Took me hours to fix this problem, but I found out that the SSID was being broadcast twice. I'm like, what the crap? Turns out it was the Airport Express I have for beaming iTunes to my home theater. I must've set it up wrong or something. Anyway, I unplugged that baby, leaving the SSID being broadcast just once. PS3 connected automatically right away, it must've been confused by the two SSIDs. Huzzah!!!!!!

chrishicks
03-14-07, 06:26 PM
I tried something even better....I replaced my Netgear router with a LinkSys Wireless-N router ;) . Plugged it in, and it worked right out of the box with no issues. So, You can add the LinkSys WRT150N to the list of wireless routers that work with the PS3!

so how is this one still working? any issues? what kind of speeds do you get on your PS3 with this? I'm thinking about this same router in a day or 2 so any extra feedback you can give would be greatly appreciated. thanks.

Tandr
03-16-07, 11:15 PM
I also have the WGR614. Exact Same router, exact same problem. Tried every setting on the router and still nothing over 880kbits.

ratbones
03-17-07, 02:36 AM
I have the net gear wgr614 no worky for me.

Freshmeat36
03-23-07, 12:15 PM
Gentlemen,
Due to a massive lightning storm the other day, I am sorry to say that my Lnksys wireless router is no longer with us. RIP :rolleyes:

In an attempt to get through these difficult times I will replace it with the best freaking router that I can find. :D I was hoping to get some guidance as to what routers actually work best out of the list that is provided. There are a lot of routers shown as working but which ones work seamlessly? My Lnksys had a bad habit of disconnects and was SLOOOOOOW on downloads.

So out of the working list, what are the best of the best?
Thanks,
Chris

P.S. I am running XP and may I suggest that a tier be created representing a list of routers that have zero issues.

dogdoctor
03-23-07, 07:11 PM
Gentlemen,
Due to a massive lightning storm the other day, I am sorry to say that my Lnksys wireless router is no longer with us. RIP :rolleyes:

In an attempt to get through these difficult times I will replace it with the best freaking router that I can find. :D I was hoping to get some guidance as to what routers actually work best out of the list that is provided. There are a lot of routers shown as working but which ones work seamlessly? My Lnksys had a bad habit of disconnects and was SLOOOOOOW on downloads.

So out of the working list, what are the best of the best?
Thanks,
Chris

P.S. I am running XP and may I suggest that a tier be created representing a list of routers that have zero issues.

I think you will get lots of opinions on this. But I purchase a linksys WRT54G and had zero problems from the start. You might want to look at the 54GS.

As for a tier system of Zero issues...I think that is going to be to hard with way too many software/firmware/computer/distance/and interference issue that a zero problem for one person could be a complete hassle for others based on their set up. That is why I posted as footnotes the most common solutions to the common problems people faced.

Freshmeat36
03-24-07, 11:30 AM
Thanks Dogdoctor
I guess I should have given all my info. The router that went out was a Linksys Model No: WRT54GX2. All in all I really did not have a lot of issues with it other than constant drops and what I considered to be slow downloads. Always maintained a 97% connection and with adding security I was able to double my speed tests. Regardless of the speed tests it wasn't any faster in downloading. So I guess when I say seamless I am talking about solid connection and reasonable speeds for down loads. My best times where 45 min and most all would take more than an hour.
Thanks, Chris

P.S. I am out to pick up one of the two you suggested.

dogdoctor
03-24-07, 12:44 PM
Thanks Dogdoctor
I guess I should have given all my info. The router that went out was a Linksys Model No: WRT54GX2. All in all I really did not have a lot of issues with it other than constant drops and what I considered to be slow downloads. Always maintained a 97% connection and with adding security I was able to double my speed tests. Regardless of the speed tests it wasn't any faster in downloading. So I guess when I say seamless I am talking about solid connection and reasonable speeds for down loads. My best times where 45 min and most all would take more than an hour.
Thanks, Chris

P.S. I am out to pick up one of the two you suggested.
Before you open the box...see if you can return a router without hassle. If you have the budget, I would suggest trying out one of the pre(N) routers or even an (N) router and see if they will compatible with your other devices (you can try to future-proof yoruself). A previous poster said the linksys LinkSys WRT150N works well too. I have my 54G (v6.0) set up with WEP at about 35 ft and hooking a strong "J" through a doorway. 97-100% signal strength and b mode only (do search for the reason why - no one knows why (b) is faster than (g)) and no disconnects. I do have some ports and DMZ enabled on a static IP for the PS3.

My connection is off a 6MB cable modem = 4500-5200kbps, dowloads of movies at 42MB take only about 10-15 min. I queued up 3 yesterday and was done in 30 min.

Good luck with whatever you choose.

Mongoos150
03-24-07, 01:56 PM
There's no option for a wireless-N router? MIMO?

Also note, to take advantage of N speeds, your computer must also have an N wireless card. I've had fantastic experience with Netgear and Belkin - stay away from Linksys. I've gone through 3 linksys routers, two duds, one broke after 2 weeks.

WeApOn
03-24-07, 06:14 PM
I just hooked up my PS3 with a wireless router today- had been previously using wires. Looking for some opinions- do you ever lose connection? Is gaming slow? How much slower are the downloads?

I also heard that sometimes the video will freeze in BD playback and they believe it is due to the wireless connection- is that true?

Thanks.

Freshmeat36
03-24-07, 08:37 PM
Picked up a Linksys WRT54GS, returned due to inability to get it up and running. (india on a sat afternoon is fun!) PC cant see it and wont find it via ISP?? Back to BB for a swap and...Yep.. same problem. Built two new cat5e patches... no luck. Back to BB for a diff. make. UGGG!!

dogdoctor
03-25-07, 01:09 AM
I just hooked up my PS3 with a wireless router today- had been previously using wires. Looking for some opinions- do you ever lose connection? Is gaming slow? How much slower are the downloads?

I also heard that sometimes the video will freeze in BD playback and they believe it is due to the wireless connection- is that true?

Thanks.
There is something about the current firmware updates that after 1.54 created a instability with the PSN network enabled and BR playblack. Some folks can watch movies for hours on end and others get freezes. The fix at this time does appear to be to disable the network function of the PS3 (I did read someone with a 20GB did have the freeze with network enabled too without wireless). It is so random though. I watched Casino Royale - one freeze, then turned off network and no freezes. Watched World Trade Center without freezes after forgetting to turn off the network features.

Side Note: Update 1.6 may have fixed the problem - we'll have to see in the upcoming days.

dogdoctor
03-25-07, 01:21 AM
There's no option for a wireless-N router? MIMO?

Also note, to take advantage of N speeds, your computer must also have an N wireless card. I've had fantastic experience with Netgear and Belkin - stay away from Linksys. I've gone through 3 linksys routers, two duds, one broke after 2 weeks.
I know the PS3 only uses (b) or (g) and not (N) but some people seem to talk (N) up and I don't want to get involved. There are some (N) routers on the list as working and the individual searching for a router may be interested in (N) routers.

As for advice saying to stay away from linksys: YMMV. As far as I'm concerned I've owned 2 linksys routers in 4 years and not had a single functional problems with either so far (only the PS3 created a problem for my (b) router). According to the user created list there are 8 working Linksys routers, 6 Netgears and 4 Belkins. I wouldn't say one brand is better than the other - just that some work better than others in certain circumstances. In all cases make sure to have the latest firmware update for the router before suggesting the router doesn't work. To each their own preference for a particular brand though.

tmuirheid
03-25-07, 11:30 AM
I know the PS3 only uses (b) or (g) and not (N) but some people seem to talk (N) up and I don't want to get involved. There are some (N) routers on the list as working and the individual searching for a router may be interested in (N) routers.

As for advice saying to stay away from linksys: YMMV. As far as I'm concerned I've owned 2 linksys routers in 4 years and not had a single functional problems with either so far (only the PS3 created a problem for my (b) router). According to the user created list there are 8 working Linksys routers, 6 Netgears and 4 Belkins. I wouldn't say one brand is better than the other - just that some work better than others in certain circumstances. In all cases make sure to have the latest firmware update for the router before suggesting the router doesn't work. To each their own preference for a particular brand though.
I agree 100% - the wireless connectivity is a function of the PS3's ability to receive any wireless signal regardless of your router/transmitter. I'm convinced the WiFi receiver in the PS3 is THE weak link of the entire console (followed closely by the heat dissipation).

I fought with my wireless connection issues for a week before I purchased the Linksys Gaming Adapter (making now a Wired connection instead of Wireless) and I haven't had a problem since. If your wireless router is not located in the same room as your PS3 then I suggest you will have these problems identified in this thread and will need to either run a very long cable or come up with a game adapter option. Been there done that and I don't think firmware updates will fix this flaw.

JimSD
03-25-07, 12:21 PM
We're using the Linksys WRT54G and got it working with the 60GB PS3 right away. Bought the WRT54G because we have several at work and I was confident I could get it configured.

Freshmeat36
03-26-07, 03:19 PM
So I got my router up, and discovered the problem with the communication between the router and the computer. The only way I was able to get the two to communicate was to configure the net card to 10mbps/ Half Duplex?? :eek: So without that setting, no internet and no access to router via IE.

Not being satisfied with this, I decided to work on it.... Un-install, reinstall net card, new drivers and a few utilities. The utilities tell me that the router and the PC are good to go at 100mps... hmm, so I exit the router from the loop and go straight modem into the PC. The utility tells me that 10m/half is max!! WHATTTTT!!

It turns out that I am one of the few nobs left in the world that still runs a Motorola SB3100. I would have never guessed that its max speed was 10mps for the Lan. The problem was the PC and the router were both trying to talk at 100mps while the modem was throwing out 10mps downstream causing all the problems. I've had that modem for five years and never noticed it was actually running at 10maps all that time with the netcard set to auto. I am on my way out to swap my modem out this afternoon. It ain't easy being a knucklehead!! :o

So back to the router, I choose a Net Gear WPN824 Rangemax. SSID disabled and running WEP. Super easy to set up the PS3 and so far I have not noticed any drops. Naturally... I wont be quoting any speedtests until I get my new modem. Let me know if there is anything you would like me to try, test, etc., I would be happy to provide more info for the list.

Laugh it you must and thanks for reading,
Chris

Lyshen
03-27-07, 07:28 AM
Asus WL-500G Premium with factory firmware as well as DD-WRT v23 sp2, both work fine with the PS3.

Linksys WRT54GS v2.0 w/ DD-WRT v23sp1 works with PS3.

FSUGSharp
03-27-07, 01:59 PM
Has anyone seen/solved this issue? Every time I turn on my PS3 my router "crashes". Not exactly sure what happens to it, but none of the computers in my house can connect to the internet. To fix the problem, I simply reboot (unplug then plug in) my rounter. At that point all PC's have internet connectivity. I then run "Test Network Connection" on my PS3. It obtains an IP, connects to the internet and has no other problems. The only other time this appears to happen is when a PS2 game is loaded.

I have a Linksys BEFW11S4 802.11 b router and I have disabled the SSID broadcast. I was getting constant disconnects until I disabled the SSID broadcast.

I know this is an older router and buying a new one would probably fix it, but I prefer to not shell out the $ and then have to reconfigure all my devices.

Any help would be appreciated.

Tom Imp
03-27-07, 02:03 PM
I have a quick question about this stuff. I currently don't have one of these routers as I don't even have a system yet, but I'm curious about something.

My PS3 will be downstairs, but my internet access and computer are upstairs. There is no line of sight as the rooms wind down the stairs and are far away from each other. Will using a wireless router upstairs still be detected by the PS3 downstairs?

Lyshen
03-27-07, 02:15 PM
I have a quick question about this stuff. I currently don't have one of these routers as I don't even have a system yet, but I'm curious about something.

My PS3 will be downstairs, but my internet access and computer are upstairs. There is no line of sight as the rooms wind down the stairs and are far away from each other. Will using a wireless router upstairs still be detected by the PS3 downstairs?

Tough to say, how many walls between your router and where you plan to place the PS3? (Also the material in the wall construction plays a role as well) The more walls there are the faster the signal breaks down.

Tom Imp
03-27-07, 03:13 PM
Tough to say, how many walls between your router and where you plan to place the PS3? (Also the material in the wall construction plays a role as well) The more walls there are the faster the signal breaks down.

Kinda hard to count walls as it's not a straight line. Once you get out of this room upstairs, it goes down the stairs and curves towards the family room where the console will be. As for material in the walls, that's not a problem as they did a crap job insulating this house.

tingham
03-27-07, 05:16 PM
Has anyone seen/solved this issue? Every time I turn on my PS3 my router "crashes". Not exactly sure what happens to it, but none of the computers in my house can connect to the internet. To fix the problem, I simply reboot (unplug then plug in) my rounter. At that point all PC's have internet connectivity. I then run "Test Network Connection" on my PS3. It obtains an IP, connects to the internet and has no other problems. The only other time this appears to happen is when a PS2 game is loaded.

I have a Linksys BEFW11S4 802.11 b router and I have disabled the SSID broadcast. I was getting constant disconnects until I disabled the SSID broadcast.

I know this is an older router and buying a new one would probably fix it, but I prefer to not shell out the $ and then have to reconfigure all my devices.

Any help would be appreciated.

This is a known issue with your router...I have the same router and upgraded to the netgear 624v3...I got it for $10 after rebate. I have had no problems since using the netgear. The linksys befw11s4 also disconnects from the internet if streaming video from a website.

Lyshen
03-27-07, 08:08 PM
Kinda hard to count walls as it's not a straight line. Once you get out of this room upstairs, it goes down the stairs and curves towards the family room where the console will be. As for material in the walls, that's not a problem as they did a crap job insulating this house.

There is a way to test how strong/weak the signal would be but that would require you to have the wireless router and a laptop or pda. And from what I remember of your post, you don't have a wireless router yet. :(

But based on what you said, the signal will probably reach (but low signal). Of course won't really know until you try.

jkoch6599
03-29-07, 09:22 AM
I had been using my Vonage adapter, a WRTP54G, which is otherwise a terrible router, since I got my PS3. I've had 100% signal strength from 20 feet away and great download speeds. Last night I upgraded my main router (not using the vonage adapter as a router except for wireless to my PS3) to a DLink DGL-4300. Now my signal strength is between 60 and 90%, and download speeds aren't as good. I don't know if I should even bother with this thing, and just use the Vonage router instead.

Any suggestions?

Thanks,

John

tingham
03-29-07, 05:43 PM
What frequency are you using with your router? B or G?

jkoch6599
03-29-07, 06:03 PM
What frequency are you using with your router? B or G?

I've tried B and mixed. Mixed seems to work a little better than B.

tingham
03-29-07, 06:07 PM
What channel are you using? You could try channel 11 to see if that helps?

jkoch6599
04-03-07, 04:03 PM
What channel are you using? You could try channel 11 to see if that helps?

tingham, I switched to channel 11 and my connection is much better! It stays at 100% signal strength most of the time, and download speeds are good. Thanks a lot for the tip.

Moderndaydruid
04-07-07, 05:55 PM
Netgear MR814v2 not working for me.

PS3 updated the newest firmware just fine (approx 5 min. download) but now I get "You have been disconnected from Access Point" error and I can't stay online more than 10 seconds or so. This seems to be an issue with the PS3 wireless adapter since my 360 and Wii (as well as laptop) all work without problem over the wireless connection.

dogdoctor
04-07-07, 06:20 PM
Netgear MR814v2 not working for me.

PS3 updated the newest firmware just fine (approx 5 min. download) but now I get "You have been disconnected from Access Point" error and I can't stay online more than 10 seconds or so. This seems to be an issue with the PS3 wireless adapter since my 360 and Wii (as well as laptop) all work without problem over the wireless connection.
Have you updated the router firmware too?

Tripjammer
04-09-07, 06:31 PM
Does this router work with the PS3?

Linksys WRVS4400N

azaze
04-11-07, 10:41 AM
I am using: D-link DI-524 802.11 b/g 2.4GHz with no problems.

Tripjammer
04-11-07, 12:52 PM
Does the Dlink DIR-655 work with the PS3?


http://crunchgear.com/2007/02/12/d-link-dir-655-draft-n-hotness/

UMD_Terp
04-12-07, 09:23 AM
OK so I replaced my POS Netgear WGT624v3 router with a linksys WRT54GL v1.1 and no issues whatsoever. I set up the Linksys the way I wanted and got both my laptop and PS3 on the wireless and everything worked without a single hitch. I am still using the OEM firmware. I did not have to set up the PS3 behind the DMZ at all for some reason. Everything just worked using UPnP I am guessing. PS Store, Folding@home, web browsing, and online motorstorm all worked without a hitch the first time.

The Netgear I had would drop the wireless connection at least once a day requiring a reboot. Speeds compared to the Linksys were about 1/3rd as fast both wireless and WIRED which really surprised me.

So the Linksys WRT54GL v1.1 seems to so far be totally compatible with the PS3 at least in my experience. Perhaps later I will go to the DD-WRT firmware to maybe up the TX power on the thing as the signal is around 90% to the PS3...

UMD_Terp
04-12-07, 09:29 AM
^^^


BTW, the router is set up as G only using WPA-TKIP encryption, mac filtering, and SSID broadcast off. I have only a total of 3 devices including my desktop PC, so the DHCP assignment has also been limited to only 3 addresses.

tingham
04-13-07, 07:53 PM
OK so I replaced my POS Netgear WGT624v3 router with a linksys WRT54GL v1.1 and no issues whatsoever. I set up the Linksys the way I wanted and got both my laptop and PS3 on the wireless and everything worked without a single hitch. I am still using the OEM firmware. I did not have to set up the PS3 behind the DMZ at all for some reason. Everything just worked using UPnP I am guessing. PS Store, Folding@home, web browsing, and online motorstorm all worked without a hitch the first time.

The Netgear I had would drop the wireless connection at least once a day requiring a reboot. Speeds compared to the Linksys were about 1/3rd as fast both wireless and WIRED which really surprised me.

So the Linksys WRT54GL v1.1 seems to so far be totally compatible with the PS3 at least in my experience. Perhaps later I will go to the DD-WRT firmware to maybe up the TX power on the thing as the signal is around 90% to the PS3...

It seems strange that some have problems with the 624v3...and some do not. I have it and have not had many problems with disconnects...this router is known to be either a hit or miss...it must be something with quality control. What kind of download speeds did you get with the 624...and what are you getting with your new wrt54gl?

UMD_Terp
04-13-07, 08:10 PM
It seems strange that some have problems with the 624v3...and some do not. I have it and have not had many problems with disconnects...this router is known to be either a hit or miss...it must be something with quality control. What kind of download speeds did you get with the 624...and what are you getting with your new wrt54gl?


So I used the speedtest at www.speakeasy.net/speedtest/ to gauge my connection speed...

With the wgt624v3:

Wired -- maxed out around 8mbps
Wireless -- struggled to get to 3 mbps but switched to 'g' only and was able to eke out 6mbps

With the wrt54gl:

Wired -- maxed out around 22mbps and ranges from 16mbps to 22mbps depending on time of day
Wireless -- identical to the wired connection (as it should be)

These tests were run using my windows desktop and my macbook pro laptop. Both routers were configured with WPA-TKIP encryption, SSID broadcast off, 'g' only, and mac filtering. These speeds are testing my connection to the internet... LAN only speeds are probably faster.

tingham
04-13-07, 08:30 PM
Oh My!!! What kind of service are you getting from your isp? You must be paying alot for those speeds!! More power to you! I get a little over 6.5 down...a little above what my isp advertises. Of course like you... it could change during high demand hours. Maybe this is why I don't have a problem with my 624...More bandwidth to the 624 causes issues? I get about 4.5 down wireless.

UMD_Terp
04-13-07, 08:35 PM
regular old comcast cable

I only get those types of speeds using that specific bandwidth tester... with others I get anywhere from 6mbps to 11mbps...

tingham
04-13-07, 08:38 PM
regular old comcast cable

I only get those types of speeds using that specific bandwidth tester... with others I get anywhere from 6mbps to 11mbps...

That's who I have also...I will try that site also...and see my results..thanks

UMD_Terp
04-13-07, 08:41 PM
I think it helps that I am in MD and they have a server in DC... proximity makes a significant difference.

tingham
04-13-07, 08:53 PM
I just tried the link that you provided and I got ...4224 down 720 up... pretty much what I always get using wireless. I wonder if you are getting Comcrap's powerboost feature and I am not? Maybe you are shorter down the bandwidth line on your cable network than me also..I will have to do some more investigating on this.

blkdog7
04-14-07, 09:08 AM
I have an Apple Snow Airport Basestation which is a "B" wireless device. When I got my PS3 I initially tried to use the PS3 wirelessly but couldn't maintain the connection. However, I didn't spend much time trying to get it to work. So, not sure if I could have actually gotten it to work better if I kept trying. It was starting to get frustrating so I just plugged an ethernet cable in that was right there.

My Wii that is sitting right next to my PS3 works fine with the same base station.

UMD_Terp
04-14-07, 12:08 PM
I just tried the link that you provided and I got ...4224 down 720 up... pretty much what I always get using wireless. I wonder if you are getting Comcrap's powerboost feature and I am not? Maybe you are shorter down the bandwidth line on your cable network than me also..I will have to do some more investigating on this.



well, at least you get 720 up... we are capped at 384kbps up :rolleyes:

adrman
04-14-07, 05:20 PM
Today I swapped out my three year old Airport Extreme for a Buffalo WHR-HP-G54. The Buffalo works great, both with my Mac and the PS3.

saturnotaku
04-16-07, 09:01 AM
I have a D-Link DGL-4300 wireless router (firmware 1.7) and a 20 GB (non-WiFi) PS3 connected to my network with a D-Link DGL-3420 wireless adapter. I run my router with WPA-PSK encryption with SSID broadcast off, and it works just fine. Before connecting the adapter to the PS3, you have to hook it up to your router/PC and enter your security settings in manually.

I need to get myself a proper cable splitter so I can move my router and modem downstairs, giving my 360 and PS3 a wired Internet connection.

Cysquatch
04-17-07, 04:19 PM
I just made the switch from DSL to Cable last week. Using the Linksys WRT54G router with zero problems. Just ran the speakeasy tests on all 3 connected systems.

PC (connected direct to cable modem via router) = 12152kbps
Laptop (connected wirelessly) = 7029kbps
PS3 (also wirelessly) = 4621kbps

Anyone know why the significant difference between the laptop and PS3?

ppshooky
04-17-07, 05:50 PM
Anyone know why the significant difference between the laptop and PS3?
Only thing I can think of is location of the PS3 and the laptop.

I'm assuming your PS3 is in a media center, which is covered? And surrounded by other electronics? Is there any other wireless tech near the PS3?

The only thing I can think of that is causing the difference in speed is distance from the router and whether or not it there are other electrical interferences.

johnwcookjr
04-21-07, 10:17 AM
Actually I use a wireless A/B/G router, only the PS3 is setup to run on "G", other devices such as laptops etc are all running on "A" so speed throughput is great and reliable.

I have the kids portable stuff like the PSP running on the "B" side.

talbain
04-28-07, 01:10 PM
woohoo! 1.7 update fixes wireless speed issues! mixed and g only are now just as fast as b only. this is GREAT news

tingham
04-28-07, 05:01 PM
woohoo! 1.7 update fixes wireless speed issues! mixed and g only are now just as fast as b only. this is GREAT news

This is good news...I will have to try it!! Way to stay on top of things talbain...I have not even thought of checking this since all of the new firmware updates...I always knew there was something wrong with the ps3's wireless "g" mode. Thank goodness it could be fixed with a firmware upgrade...And it is not a hardware issue :)

talbain
04-28-07, 11:32 PM
This is good news...I will have to try it!! Way to stay on top of things talbain...I have not even thought of checking this since all of the new firmware updates...I always knew there was something wrong with the ps3's wireless "g" mode. Thank goodness it could be fixed with a firmware upgrade...And it is not a hardware issue :)


yeah its been bothering the hell out of me, so much so that i've run my full battery of tests with every damn update. 1.70 is the one that fixed it. i'm at max speeds with b only (what we've been using), g only (new) and mixed (new). no changes made to my configuration whatsoever other than the firmware update. good job sony. it's crazy though that they make no mention in the changelog at all regarding wireless networking updates...

scarface8087
04-29-07, 01:22 AM
well I am not too computer savy to say the least, so forgive my lack of terms & knowledge. I bought a linksys wrt55ag from BB when I got my x360 about a year ago. one of best buy's salespeople in the computer department reccomended that I go with the more expensive a+g routers. anyways ,to make a long story short, I been playing online all this time & just recently bought a ps3 & been playing online for a couple of months with no drop out issues. all of a sudden I been having online dropouts left & right, some days worse than others & some days no problems at all. I havn't noticed dropouts with the x360, however Ive been playing the ps3 99% of the time the last couple weeks(F!@#ing Resistance takes hours from your life like smoking cigarettes).....I called linksys support & they laughed when I told them I bought a A+G router,saying A is useless(Damn Best Buy cons)...anyways I noticed on my ps3 the signal strength is anywhere from 50-60%.my router is upstairs,games downstairs approx 20-25 ft away.comcast cable internet signal is as strong as can be.the linksys support hooked me up with the most optimum configuration for the router. I still have the same problem.....has anybody experienced a decline in there wireless experience with there ps3 since first purchasing it......Im lost! :confused:

tingham
04-29-07, 07:26 PM
well I am not too computer savy to say the least, so forgive my lack of terms & knowledge. I bought a linksys wrt55ag from BB when I got my x360 about a year ago. one of best buy's salespeople in the computer department reccomended that I go with the more expensive a+g routers. anyways ,to make a long story short, I been playing online all this time & just recently bought a ps3 & been playing online for a couple of months with no drop out issues. all of a sudden I been having online dropouts left & right, some days worse than others & some days no problems at all. I havn't noticed dropouts with the x360, however Ive been playing the ps3 99% of the time the last couple weeks(F!@#ing Resistance takes hours from your life like smoking cigarettes).....I called linksys support & they laughed when I told them I bought a A+G router,saying A is useless(Damn Best Buy cons)...anyways I noticed on my ps3 the signal strength is anywhere from 50-60%.my router is upstairs,games downstairs approx 20-25 ft away.comcast cable internet signal is as strong as can be.the linksys support hooked me up with the most optimum configuration for the router. I still have the same problem.....has anybody experienced a decline in there wireless experience with there ps3 since first purchasing it......Im lost! :confused:

Did you add any wireless devices in your home recently..wireless phone? What channel are you using for your wireless? Maybe the neighbor's added wireless and you are picking up interference. Try changing the wireless channel to 11 or 3...preferably channel 11. You had no problems for 2 months...so something has caused interference recently for you to have these issues.

FiveMillionWays
04-29-07, 07:30 PM
That's why I use a wireless N router! No such hassels!

tingham
04-29-07, 07:53 PM
yeah its been bothering the hell out of me, so much so that i've run my full battery of tests with every damn update. 1.70 is the one that fixed it. i'm at max speeds with b only (what we've been using), g only (new) and mixed (new). no changes made to my configuration whatsoever other than the firmware update. good job sony. it's crazy though that they make no mention in the changelog at all regarding wireless networking updates...

Sony will not admit there was a throughput problem with the wireless"g" on the ps3..Just like they would not admit anything about the b/d freezing issue ...although some never had it...but alot did for some reason..There have been several issues..as we know..that Sony fixed with firmware updates that were never mentioned in their changelog's. I am just glad that they are correcting these problems and taking care of owners of the PS3. I have not seen one post about b/d freezing recently so I assume something they did corrected the problem for all those that had it-Hooray!!. Hopefully there will not be a update in the future that will mess something up.. but be rest assured..if it does..Sony will correct the problem..eventually.

beach scrub
05-13-07, 02:52 PM
Finally having network connection problems similar to a poster above. Here's the run down...

I purchased and installed the netgear WPN824 v2 in Jan 07. I used the basic network software and settings provided with the router. I have Time Warner roadrunner broad band service. My computer is connected with a wire to the router.

After router install, I disabled SSID broadcast and have been gaming on line with no problems. I was also using WPA security, since WEP signal wasn't as strong according to the PS3 auto detect. Last week I had the PS3 on line and tried to get on line with my computer. Web pages for the computer wouldn't open. Guess that has something to do with IPs.

Last night while gaming on line and my computer in standby I got disconnected from RFOM about once every 20 minutes. I've never had this problem before.

If someone could help me with the following...

1. Setting up the router to allow on line gaming with the PS3 and web surfing with the PC at the same time.
2. Help me track down why I'm getting kicked of the network all of the sudden.

Thanks in advance for the help. I’ve tried to search out the answers but wasn’t getting anywhere on my own. Since I’m new to wireless networks, I’ll need a wireless networking for dummies kind of guidance/reply.

Please help.

dogdoctor
05-13-07, 03:33 PM
Last night while gaming on line and my computer in standby I got disconnected from RFOM about once every 20 minutes. I've never had this problem before.Are you sure it was just you? We had and entire room of people get disconnected from the network at about 9ish (PST). I wasn't on that much longer about and hour and I never was booted again. It was as if one by one we got kicked out. It was the weirdest thing and we all chalked it up to the servers.

beach scrub
05-13-07, 06:14 PM
Are you sure it was just you? We had and entire room of people get disconnected from the network at about 9ish (PST). I wasn't on that much longer about and hour and I never was booted again. It was as if one by one we got kicked out. It was the weirdest thing and we all chalked it up to the servers.

I was wondering about that too. I played Friday afternoon and got kicked. This is when everything started. I called my friend that was on line with me at the same time and he said he never lost connection so I eliminated PSN as the only culprit.

Some of it might be just PSN, but some might be my settings too.

Thanks for the input. :)

calv1n
05-13-07, 06:36 PM
Gave up on wireless and just do a straight hardwire now for the PS3. It connects to the wireless and I can get online but to download anything is so painfully slow I can't handle it - hardwired it is fine.

dogdoctor
05-17-07, 02:16 AM
I was wondering about that too. I played Friday afternoon and got kicked. This is when everything started. I called my friend that was on line with me at the same time and he said he never lost connection so I eliminated PSN as the only culprit.

Some of it might be just PSN, but some might be my settings too.

Thanks for the input. :)Sorry Colts,
You still having the problems? If so start by telling us what other settings you changed in the router (ie ports opened, DMZ enabled etc.). We'll try to help you out.

UMD_Terp
05-17-07, 11:17 AM
I actually remember having a lot of issues last Friday and some of the weekend as well... PSN was really really slow to log on. It has been just fine all this week though.

Galley
05-19-07, 10:37 PM
Once I updated the firmware on my Belkin N1 802.11n router, it has been rock-solid with my PS3. :cool:

beach scrub
05-20-07, 03:26 PM
Sorry Colts,
You still having the problems? If so start by telling us what other settings you changed in the router (ie ports opened, DMZ enabled etc.). We'll try to help you out.


Sorry for the delay. The first few months was basic setup with WPA-PSK for security and SSID broadcast off. Basic setup was the default CD easy install for my network.

At the time of the problems I was using WPA-PSK for security. I was using wireless access card for the PS3 using the Mac address. SSID broadcast off. No port forwarding. I reserved an IP address for the PS3.

The disconnect problems happened while playing RFOM, specifically every time I played a party type of game with members of our clan. If I played games without using a party invite, the disconnects were minimal.

I posted to a few forums and found some info on the playstation forums. I found info about open dns server. I inputted generic settings in the router and left the PS3 in auto for the DNS. Then I noticed my nat had "failed". This led to further disconnects. I then inputted the same DNS settings set in the router to the PS3. So far so good but I haven't tried a party type of game yet. I will tonight.

If the problem continues I'll try port forwarding with the ports specified in this link (http://manuals.playstation.net/document/en/ps3/current/settings/connecttest.html).

If there are an optimized settings I should do for my network, please give me the details on how to set it up properly. I'm gonna try tonight and if it works turn on the WPA again and test.

Thanks for the time.

beach scrub
05-21-07, 08:34 AM
played RFOM party game for a couple of hours without a hitch. What ever I did seemed to work.

Here's the link of what I did.

80710102 / 80028EA5 NETWORK ERROR EASY INSTRUCTIONS (http://boardsus.playstation.com/playstation/board/message?board.id=psnetwork&thread.id=22354)

Hopefully someone else will find this useful.

thowe21
05-21-07, 05:13 PM
played RFOM party game for a couple of hours without a hitch. What ever I did seemed to work.

Here's the link of what I did.

80710102 / 80028EA5 NETWORK ERROR EASY INSTRUCTIONS (http://boardsus.playstation.com/playstation/board/message?board.id=psnetwork&thread.id=22354)

Hopefully someone else will find this useful.

Thanks for the info., I have the same Netgear 824 model as you but haven't had a problem yet with it for the past year. I have the router upstairs and the PS3 downstairs and the MIMO function of the router works great. I'll keep your link handy in case there is a problem in the future but I'm knockin on wood.

Mr. Wonderful
05-27-07, 08:47 AM
Belkin has released a firmware update (beta) for the N1. (http://www.belkin.com/support/article/?lid=en&pid=F5D8231-4&aid=5927&scid=0)

Has anyone tried this with the PS3 yet?

talbain
05-28-07, 01:03 PM
looks like the 1.8 update once again introduces speed issues with wireless...

mixed and g only work but are slow as hell. b only is the only setting that enables full bandwidth. this was the same problem they had before it was fixed in the 1.7 update...

Padriac
05-29-07, 01:36 AM
I didn't see it mentioned so I thought I'd add...

I can confirm the new Apple Airport Extreme (the square, draft-N one) works great with the PS3. I'm running it in mixed N/G/B and getting the same speed I get with any other G devices on the network.

talbain
06-03-07, 09:23 PM
looks like the 1.8 update once again introduces speed issues with wireless...

mixed and g only work but are slow as hell. b only is the only setting that enables full bandwidth. this was the same problem they had before it was fixed in the 1.7 update...


ok false alarm guys. i did quite a bit of testing this evening and things are still fixed. i have no idea what happened last weekend. maybe my provider was having issues (again). anyway, disregard my previous post. mixed and g only are still blazingly fast...

gamelover360
06-04-07, 02:08 PM
Anyone know if the PS3 will conect to a dual band router? I heard that dual band routers requires a dual band wireless card in PC that it connects to the internet.


Thanks in advance

gamelover360
06-04-07, 06:11 PM
I want to get a new router that is dual band a/g that can operate in the 5 Ghz frequency which is supposedly ideal for streaming videos.

But the PS3 is only b/g compatible. So what are my options for a good router that can handle streaming vids easily and smoothly?

Any reccomendations. right now I have a Netgear 54 Mps WGR614 v6 wireless router that operates at 2.4 Ghz and supports b and g, not a.

beach scrub
06-08-07, 05:20 PM
The disconnect problems reappeared after I tried some new settings. I've submitted for on line tech support. Got this firmware update link from netgear. I downloaded and installed this update and played RFoM for 45 minutes with minimal lag and zero drops. So far so good. Again!

WPN 824v2 FW update (ftp://downloads.netgear.com/files/wpn824v2_2_0_10_na.chk)

Good luck.

ppshooky
06-08-07, 05:36 PM
I want to get a new router that is dual band a/g that can operate in the 5 Ghz frequency which is supposedly ideal for streaming videos.

But the PS3 is only b/g compatible. So what are my options for a good router that can handle streaming vids easily and smoothly?

Any reccomendations. right now I have a Netgear 54 Mps WGR614 v6 wireless router that operates at 2.4 Ghz and supports b and g, not a.
Here's one that's not out yet:
http://www.dlink.com/products/?sec=1&pid=548 - Dlink DIR-855

I have the Dlink DIR-655 and it works pretty well for me. It's not dual band, however.

WirelessGuru
06-14-07, 05:01 PM
I want to get a new router that is dual band a/g that can operate in the 5 Ghz frequency which is supposedly ideal for streaming videos.

But the PS3 is only b/g compatible. So what are my options for a good router that can handle streaming vids easily and smoothly?

Any reccomendations. right now I have a Netgear 54 Mps WGR614 v6 wireless router that operates at 2.4 Ghz and supports b and g, not a.
You could go with 802.11a and use a wireless bridge on the PS3 end. Or you could go dual band and use 802.11a for your PC and 802.11g for your PS3. A dual band router will broadcast on both frequencies simultaneously.

DO NOT purchase anything "N" until the 802.11n standard is ratified by the IEEE.

Pyrple
06-19-07, 04:10 AM
I have my PC's and router downstairs and my xbox 360 and PS3 upstairs, and I'm not happy with the signal strength. Anyone know what the best wireless router would be for range and the ability to go through walls? I'm particularly interested in streaming media and playing multiplayer games.

I've read a lot of the posts here, and the WRT54G v6 seems to be the router of choice. Is there a router which is as good as the WRT54G but that has a bigger range?

Thanks

UMD_Terp
06-19-07, 07:59 AM
Just to follow up, I have recently added Verizon FIOS service and as part of the package deal, Verizon gives you a Actiontec MI424WR wireless router. I was skeptical of this router being better than my Linksys, but it is indeed a solid performer. Wireless performance to the PS3 is great and all features work just fine. I have the PS3 set up to get its IP address manually and SSID is off. UPnP had to be switched on and I just had to change the DHCP assignment range on the router to reserve a few static addresses for the PS3, laptop, and desktop I have. I use WPA-TKIP encryption. The default is WEP so that has to be switched off to allow WPA.

Bretskii
06-19-07, 05:31 PM
I had a Linksys Wireless b router which worked so so for my online gaming. I just hooked up a new WRT54GS ver.7 yesterday, straight out of the box, and everything is working great. I haven't tried to stream media yet with it.

goatboy413
06-20-07, 02:44 PM
I have a Linksys BEFW11S4 and I have problems connecting. I've been online before but now I get booted everytime I try to do anything. Neither Sony nor Linksys were much help. Do I need to open ports to fix this?

dogdoctor
06-21-07, 12:54 AM
I have a Linksys BEFW11S4 and I have problems connecting. I've been online before but now I get booted everytime I try to do anything. Neither Sony nor Linksys were much help. Do I need to open ports to fix this?
The best bet is to:
Turn off SSID broadcasting in the router.
Set up the PS3 with a static IP address.
Enable DMZ in the router for the Static IP for the PS3 or...
Open Ports in the router for the static IP. (there is a thread around here somewhere - search for port forwarding; found it here (http://www.avsforum.com/avs-vb/showthread.php?p=9017967&&#post9017967)).
Dissable the routers UPnP ability if you are trying to use media sharing feature of the PS3 or...
Turn off the Media sharing feature on the PS3 in the network settings if you don't plan on using it. Linksys and this feature don't get along to well.
If you've done all that - I'm out of help.

cjc1922
06-21-07, 01:32 AM
I hope someone can help me out... I purchased and installed the Netgear Rangemax WPN 824 v2 wireless router, and all seemed ok at first w/my PS3. Through the PS3 I was able to access the internet and also go into my main PC and look at pictures, or play music etc. About a week ago, I found out I couldn't access those very same files anymore. I can still get onto the internet fine, as well as sign on and download stuff through the PS3 (trailers, game demo's etc)... I get the following error message when I try to access files from my main PC:

"A connection to the media server could not be established. Check the settings for the media server and network devices." followed by "Access to the media server has been denied. Please check the media server."

I'm not a computer wiz, but I've tried everything I could think of to fix this... it's very frustrating. Please help !!
Cj

dropgems
06-21-07, 04:38 AM
I've been disconnecting like crazy the past month. Like once every half hour, it's so annoying. I've been playing online since day 1 of launch with no errors then around a month ago it all started going downhill. It must've been the update. I'm using an apple airport and I haven't changed any settings or anything since the beginning. Also, I checked my bandwidth on my wireless ps3 and it's incredibly slow compared to my wireless laptop. Laptop is 20,000 kb/s, ps3 2,000 kb/s, ping is 20 ms on both. Why is my ps3 bandwidth 10 times slower than my laptop?

ParadiseLost
06-22-07, 01:13 AM
Not sure if this has been posted yet, but here's the info I have.

I had a Linksys WRT54GS v.5 with the latest firmware available from Linksys (can't remember exact number). It worked wireless with all my devices except the PS3 (which had to be wired to work). So I exchanged the model for a new Linksys WRT54G v8 (right out of the box). Just to be cautious, I set up the security as WEP (recommended by Sony tech for what that's worth) disabled my SSID, and hooked everything up. Now ALL my devices work wireless, including the PS3, with improved signal strength all around.

ppshooky
06-22-07, 10:32 AM
Not sure if this has been posted yet, but here's the info I have.

I had a Linksys WRT54GS v.5 with the latest firmware available from Linksys (can't remember exact number). It worked wireless with all my devices except the PS3 (which had to be wired to work). So I exchanged the model for a new Linksys WRT54G v8 (right out of the box). Just to be cautious, I set up the security as WEP (recommended by Sony tech for what that's worth) disabled my SSID, and hooked everything up. Now ALL my devices work wireless, including the PS3, with improved signal strength all around.
WEP is not adequate security for keeping intruders out of your network, by the way.

It seems like newer routers are more compatible with the PS3 than others.

Bretskii
06-22-07, 11:01 AM
** on a sidenote is there a wireless security for dummies anywhere? I'm ok with computer stuff, even tried setting up the security, a few times. I get frustrated and just leave it wide open. TIA for any links.

ppshooky
06-22-07, 04:04 PM
** on a sidenote is there a wireless security for dummies anywhere? I'm ok with computer stuff, even tried setting up the security, a few times. I get frustrated and just leave it wide open. TIA for any links.
Are you trying to figure out what's the best way to have a secure wireless network? The answer would be to not have one at all.

But, if you must, make sure you have WPA-PSK or WPA2. It's still crackable...it just takes a ridiculous amount of time to do it, when they can break into someone else's network that is either unsecured or uses WEP.

Also, disabling SSID broadcast will not prevent someone from accessing your wireless network, and setting up a MAC address filter can be bypassed by MAC address spoofing. I think I read somewhere that someone can bust into a network that has WEP, disabled SSID broadcast,

So, really, there's no such thing as a secure wireless network. But, the closest you can get is to have WPA-PSK / WPA2, and disabled SSID broadcast and MAC address filtering for some extra precautionary measures.

ParadiseLost
06-30-07, 03:19 AM
WEP is not adequate security for keeping intruders out of your network, by the way.

It seems like newer routers are more compatible with the PS3 than others.

I agree about WEP, but started there since Sony recommended it. I changed it to WPA the next day and everything (laptop, 360, and PS3) is still working great!

tingham
06-30-07, 10:30 AM
I hope someone can help me out... I purchased and installed the Netgear Rangemax WPN 824 v2 wireless router, and all seemed ok at first w/my PS3. Through the PS3 I was able to access the internet and also go into my main PC and look at pictures, or play music etc. About a week ago, I found out I couldn't access those very same files anymore. I can still get onto the internet fine, as well as sign on and download stuff through the PS3 (trailers, game demo's etc)... I get the following error message when I try to access files from my main PC:

"A connection to the media server could not be established. Check the settings for the media server and network devices." followed by "Access to the media server has been denied. Please check the media server."

I'm not a computer wiz, but I've tried everything I could think of to fix this... it's very frustrating. Please help !!
Cj

Did you get your media server to work again? I see this issue once and awhile. Then all of a sudden the laptop shows up on the ps3 again..weird :confused:

h3ro
06-30-07, 02:45 PM
Hey everyone, I have a Netgear WPN824v2 and have it connected via wireless to my PS3. On my XMB it shows that I am connected and logged into the PSN but my download speeds are terrible when I'm downloading any sort of games or videos. Also, I repeatedly get "connection failed. Network error" messages when I try to play Resistance. I believe the error code that came up was 8170704 (not certain). Does anyone know the optimal settings for this router so that I can download at higher speeds and not lag out or lose my connection when playing online? Thanks!

beach scrub
06-30-07, 07:29 PM
Try this FW update for the router...

WPN 824v2 FW update (ftp://downloads.netgear.com/files/wpn824v2_2_0_10_na.chk)

I had similar problems last month. Here lately I've lost connection once or twice since the FW update.

Router settings...

I've reserved an IP for the PS3.
Use WPA security.
Disabled SSID.
Setup wireless card access for the PS3.
Changed MTU size to 1400 per Netgear support.

I also did a custom setup for the PS3's wireless setup. In that setup I disabled UPnP. I also disabled the media server.

Hope some of this will be useful.

duga6
07-02-07, 01:03 PM
I hope someone can help me out... I purchased and installed the Netgear Rangemax WPN 824 v2 wireless router, and all seemed ok at first w/my PS3. Through the PS3 I was able to access the internet and also go into my main PC and look at pictures, or play music etc. About a week ago, I found out I couldn't access those very same files anymore. I can still get onto the internet fine, as well as sign on and download stuff through the PS3 (trailers, game demo's etc)... I get the following error message when I try to access files from my main PC:

"A connection to the media server could not be established. Check the settings for the media server and network devices." followed by "Access to the media server has been denied. Please check the media server."

I'm not a computer wiz, but I've tried everything I could think of to fix this... it's very frustrating. Please help !!
Cj

If you have added a wireless device since the PS3 was properly talking to the Rangemax, you might want to check your IP assignment settings at the router. I found that my router was only assigning up to 3 different IP addresses within our house, so the 4th addition (a laptop) was "stealing" the PS3's IP. Thus, the PS3 was not connecting to the router. I have now set the router to assign much more than 4 IP's and it's working well now.

duga6
07-02-07, 01:08 PM
I've been disconnecting like crazy the past month. Like once every half hour, it's so annoying. I've been playing online since day 1 of launch with no errors then around a month ago it all started going downhill. It must've been the update. I'm using an apple airport and I haven't changed any settings or anything since the beginning. Also, I checked my bandwidth on my wireless ps3 and it's incredibly slow compared to my wireless laptop. Laptop is 20,000 kb/s, ps3 2,000 kb/s, ping is 20 ms on both. Why is my ps3 bandwidth 10 times slower than my laptop?

I have the same problem. Except I disconnect every 5-10 minutes?! It's so bad that I no longer play online anymore. Pretty sad.

I have a Linksys router with DSL. I've worked with the DSL people and have updated my phone line filters. Still disconnects.

My PS3 also downloads at dial-up speeds...even with DSL. I have to do the firmware updates to a comptuer, transfer to a USB flash drive, and then update the PS3.


Anyone else have these problems? Any resolutions?

dogdoctor
07-06-07, 01:00 AM
I have the same problem. Except I disconnect every 5-10 minutes?! It's so bad that I no longer play online anymore. Pretty sad.

I have a Linksys router with DSL. I've worked with the DSL people and have updated my phone line filters. Still disconnects.

My PS3 also downloads at dial-up speeds...even with DSL. I have to do the firmware updates to a comptuer, transfer to a USB flash drive, and then update the PS3.


Anyone else have these problems? Any resolutions?Have you folks with the disconnect issue tried turning off the media sharing in the PS3. There have been lot of reports right after 1.8 that the media sharing doesn't work well with the Linksys routers and turning it off stopped all my disconnects I encountered after the update.

As always be sure to set up the PS3 with a static IP, do port-fowarding as directed by Sony for the games and headset usage, you can enable DMZ for the PS3 IP address if you wish (I do), and you can disable UPnP in the router too (I didn't). Try these steps first and write back if you still have the disconnects.

cjc1922
07-09-07, 08:52 PM
Did you get your media server to work again? I see this issue once and awhile. Then all of a sudden the laptop shows up on the ps3 again..weird :confused:

I did, yes. But.... It seems like I have to go onto the main computer and open up the 'netgear router' Smart Wizard Router Mgr. Then I can go and use the PS3 and media servers without issue. I don't know why the PS3 can't always find the media server, but that's the only way I've been able to access the main computer through my PS3. It sux to have to do this before I go onto my PS3 every time... Has anyone else had to do this?

tingham
07-09-07, 09:47 PM
I did, yes. But.... It seems like I have to go onto the main computer and open up the 'netgear router' Smart Wizard Router Mgr. Then I can go and use the PS3 and media servers without issue. I don't know why the PS3 can't always find the media server, but that's the only way I've been able to access the main computer through my PS3. It sux to have to do this before I go onto my PS3 every time... Has anyone else had to do this?

Is this "smart wizard router mgr" software on your computer? Or are you talking about going into the router settings themselves..through www.routerlogin.net

cjc1922
07-10-07, 01:19 PM
Is this "smart wizard router mgr" software on your computer? Or are you talking about going into the router settings themselves..through www.routerlogin.net

Yes, I go through the routerlogin.net. Listen, I'm not as computer savy as most here, so I'm sure it's something I'm doing wrong. What suggestions do you have?

tingham
07-10-07, 06:02 PM
Yes, I go through the routerlogin.net. Listen, I'm not as computer savy as most here, so I'm sure it's something I'm doing wrong. What suggestions do you have?

Sorry...I do not have that "smart wizard router mgr" with my netgear 624v3. I have a "smart wizard setup utility"..is this what you mean? What things are you doing in the router settings to make media streaming work when you go in there? I am willing to bet that your problem lies somewhere in there though. Do you have UPnP enabled on the router? You could try enabling that in the router settings and see what happens. make sure you click the apply tab when you are done..then click the log off tab.

cjc1922
07-11-07, 01:46 PM
Sorry...I do not have that "smart wizard router mgr" with my netgear 624v3. I have a "smart wizard setup utility"..is this what you mean? What things are you doing in the router settings to make media streaming work when you go in there? I am willing to bet that your problem lies somewhere in there though. Do you have UPnP enabled on the router? You could try enabling that in the router settings and see what happens. make sure you click the apply tab when you are done..then click the log off tab.

Great, I'll try it tonight. It looks like there is a tab for the setup utility. Last night I was able to go on the PS3 and without trekking upstairs I tried to connect... It worked! I don't know of any reason why, but it did. I'll take a look at the settings and see what is enabled (UPnP etc). Thanks for the suggestions.

13th shadow
07-17-07, 11:43 PM
Anybody here use AT&T's 2wire Gateway? I keep getting error code 8013013E telling me that the PS3 can't access my wireless LAN and to check my security settings. I have been on the phone with both AT&T and Sony and they both keep pointing the finger at each other. I had AT&T open up the ports (?) for the PS3 and have changed my security settings and I still can't connect. I just bought my PS3 over the weekend and would like to perform all the system updates that have been released before I settle in and start using it. This problem is very dissapointing since I have had no issues with my Wii or my sister's Toshiba laptop. Can anyone please help me? AT&T offered me their high end support line but they charge $99, and after dropping all that money on the PS3 and Ninja Gaiden I'm a little tapped out. Thanks in advance.

HomerJS123
07-18-07, 11:08 AM
Ok, I have the Netgear Rangemax WPN 824 v2 as well and I am seeing INSANLY slow speeds.

137Mb download takes 1.5 hours.
Ninga Gaiden demo (600 or so Mb?) took over 4 hours.

I tried speedtest and it is really jerky and never gets above 500kbps.

I know my cable modem is fine-- my wired PC gets 9000+kbps on speed test.
My wireless PC (which is twice as far from the router as the PS3) gets 2000+ kbps on speed test.

Here are some things I have noticed:

When I have the PS3 scan for the wirless routers, it will find it and usually report 80%-90% sig strength. I think everything is fine. But last night I scanned it many many times (back scan back scan etc etc). The signal strength would CHANGE from 30%-95%!!!! It's only 15 feet away!!

I got this Netgear router to replace a linksys WRT54GX v2 (the one with 3 ant and mimo) with this netgear. I replaced the linksys because once I got the 1.8x fw update on the PS3, the linksys kept crashing.

So, I still have the linksys, and decided to try that again. It 'works' great. I can connect and I get 7000+kbps with speed test on the PS3 with linksys-- however, the linksys won't last 30 minutes before it crashes.


UG! Any suggestions? I have tried every setting I can find on the Netgear. I think the problem is the large variation in sig strength but I don't know what is causing that.

I don't know what else I can do. All my other wireless devices (Wii, PC, Nokia 770) work fine with both routers. I just can't get the PS3 to work as well.

dogdoctor
07-18-07, 03:34 PM
So, I still have the linksys, and decided to try that again. It 'works' great. I can connect and I get 7000+kbps with speed test on the PS3 with linksys-- however, the linksys won't last 30 minutes before it crashes.


UG! Any suggestions? I have tried every setting I can find on the Netgear. I think the problem is the large variation in sig strength but I don't know what is causing that.
1. try turning off the media share in the PS3 and using it with the linksys and see if it crashes. If not there in lies the problem.

The rest applies for all routers:

2. check for router current firmwares, there is post in last 2 days of a new updated router firmware for the wrt54g that "fixed" these issues according to other posters.

3. try dissabling the UPnP in the router has helped some including me.
4. try opening specific ports - sort through some threads here and you will find post discussing port opening, or enable DMZ for the PS3 IP address.

As for the netgear signal strenght - if you are getting that much jumping, you might have mutlipath (signal reflections off different surfaces and then when the incoming signals reach the PS3 from varied directions it can cause confusion to the receiver thus the jump up and down in strength)/interference problems that are causing packets of info to be resent numerous times before it is registered. This could affect your overall speed, although your speed problems sound more like a bottleneck in the communication with the PS3. For connection strength try adjusting the channels. Usually the higher the number the interference from walls and other devices. I found my PS3/router like channel 10 better than 9 or 11. It's just the way it is. For the speeds, if getting more of a solid connection doesn't help, there must be something in the router slowing you down and unfortunately, I don't have experience in that department.

dogdoctor
07-18-07, 03:43 PM
Anybody here use AT&T's 2wire Gateway? I keep getting error code 8013013E telling me that the PS3 can't access my wireless LAN and to check my security settings. I had AT&T open up the ports (?) for the PS3 and have changed my security settings and I still can't connect. This problem is very dissapointing since I have had no issues with my Wii or my sister's Toshiba laptop. AT&T offered me their high end support line but they charge $99. Thanks in advance.
1. try to connect wired to the router and see if you still have issues. (at least if you get online you can do the updates - this is how I figured out the wireless portion of my original router had issues, but the router itself worked fine with the PS3 but only wired). If you can connect, then you know router is at fault. If not - there is some communication error (duh...I know) but you will need to find the setting that sets off the PS3. I would try to the router without security or anything just to the PS3 and see if it can connect. Some PS3's don't like particular security setting on some routers. At least eliminate that as a potential cause first. Read my post before this one as well for some other advice. But check for a new firmware for the router too.

2. if all else fails - spend the 99$. I week after I purchased my I needed to get a new router before a fix was found 1 months later. 50$. Then I purchased a BT headset that worked fine till update 1.6 then it would crash my PS3. 45$ (can't return so I use with my cell now) So then I needed to find a new headset that works and wont crash the PS3. 75$. All happy now, but the bank and the wife was pissed I needed to spend more money, not too long after I spent the 600+. Welcome to the club.

13th shadow
07-18-07, 10:32 PM
1. try to connect wired to the router and see if you still have issues. (at least if you get online you can do the updates - this is how I figured out the wireless portion of my original router had issues, but the router itself worked fine with the PS3 but only wired). If you can connect, then you know router is at fault. If not - there is some communication error (duh...I know) but you will need to find the setting that sets off the PS3. I would try to the router without security or anything just to the PS3 and see if it can connect. Some PS3's don't like particular security setting on some routers. At least eliminate that as a potential cause first. Read my post before this one as well for some other advice. But check for a new firmware for the router too.

2. if all else fails - spend the 99$. I week after I purchased my I needed to get a new router before a fix was found 1 months later. 50$. Then I purchased a BT headset that worked fine till update 1.6 then it would crash my PS3. 45$ (can't return so I use with my cell now) So then I needed to find a new headset that works and wont crash the PS3. 75$. All happy now, but the bank and the wife was pissed I needed to spend more money, not too long after I spent the 600+. Welcome to the club.

I went ahead and made the wired connection and it worked just fine. I was able to download the 1.82 update. I then tried again to make the connection wirelessly and it still won't work. Oh well, at least now it has the latest firmware.

Before I spend the $99 I'm going to try and figure it out on my own with the help of a fellow AVS member. He has the same type of router and is reporting no problems so hopefully he can help me.

Thanks for the suggestions, I really appreciate it.

deveng
07-19-07, 11:07 PM
Wow, I was going to post a question on wireless routers, and range extenders, etc, and found this thread. I have a NEtgear MR814 (it is a 'b') from several years ago, but knock on wood, has performed well for the last several years. I was tempted to buy a new router (such as one of the newer 'n' netgear routers, primarily for the greater range. Currently my PS3 and Xbox are at least 50 feet away, through stucko walls, and I get almost no bars for signal reception from either box or my laptop. However, I seem to be connecting well, and there does not seem to be much 'lag' when I play. Similarly, internet browsing is just a tad slow, but not too bad.

My question is a) would a range extender (ala the netgear wall plug extender) work. There seems to be many reveiws, but mixed responses, some people state it works great, some people states it keeps crashing. b) would the newer Netgear Rangemax WPN 824 type modem be a better solution (assuming it works well, as I have read again mixed reveiws of the router crashing frequently) as it seems to have great range. c) forget about wireless and get a wiring guy out to wire the room and hardwire the Xbox and PS3 as that is the only way to get good signal at the current time.

Thanks in advanced.

HomerJS123
07-20-07, 09:30 AM
1. try turning off the media share in the PS3 and using it with the linksys and see if it crashes. If not there in lies the problem.

The rest applies for all routers:

2. check for router current firmwares, there is post in last 2 days of a new updated router firmware for the wrt54g that "fixed" these issues according to other posters.

3. try dissabling the UPnP in the router has helped some including me.
4. try opening specific ports - sort through some threads here and you will find post discussing port opening, or enable DMZ for the PS3 IP address.

As for the netgear signal strenght - if you are getting that much jumping, you might have mutlipath (signal reflections off different surfaces and then when the incoming signals reach the PS3 from varied directions it can cause confusion to the receiver thus the jump up and down in strength)/interference problems that are causing packets of info to be resent numerous times before it is registered. This could affect your overall speed, although your speed problems sound more like a bottleneck in the communication with the PS3. For connection strength try adjusting the channels. Usually the higher the number the interference from walls and other devices. I found my PS3/router like channel 10 better than 9 or 11. It's just the way it is. For the speeds, if getting more of a solid connection doesn't help, there must be something in the router slowing you down and unfortunately, I don't have experience in that department.


Well, I gave up on the Netgear. I just could not get a stable connection no matter where I put it. The Signal Strength would fluctuate from 30%-90%.

So, I am back to the Linksys. I have 100% sig str. Rock solid. My speed test results are about 5k+. Everything is good right? No.

I still have the connection problem where it drops. So last night I was playing stardust hd and about 20 minutes into it the message in the upper right appears that I have 'signed out' then an 801 error message (I didn't have time to see it). I quit playing and went back to the the main menu. It's now in the mode where it auto signs in, then drops in 5 seconds, then signs in and drops. this will repeat forever.

At first, after reading other posts, I thought the Linksys was resetting. But this is not the case because my wife was on the wirelss PC and was having no problems at all. So the router was going good. It must be something with the PS3.

I have media sharing disabled.

Anyone else experiance this problem?

Tom Imp
07-20-07, 03:43 PM
Can the person who confirmed that the Linksys WRT300N worked please help me out? I cannot get the PS3 to keep a connection to this damn thing and now I am really getting quite annoyed.

underonesun
07-20-07, 10:48 PM
This may or may not help those suffering from network related problems. I'm not using wifi. But the poll results show that 500 people of 636 voters aren't having problems. So there are some things to check out.

I've heard that the new energy saving lightbulbs (the ones that look like curly fries; flourescent) can cause interference. Some other more common problems: cordless phones, iPhones, microwave ovens, and anything else emitting radio frequency. If you're in an apartment, condo, or other high density dwelling the problems can be all around you but with little you can do other than try different channels for your wifi communications. Another easy thing to try is to change the placement of the wifi router's antennas. Instead of straight up/down or straight out the back change the angles on both axes.

The other option is to use wireline instead of wifi, even though it's not a palatble solution it's more robust. It's more secure.

Anyway I hope this helps some of you that are having problems, it can be intensely frustrating to plunk down a bunch of $$$ only to have none of it work.

dastallion2
07-22-07, 10:01 AM
I actually plan to change my current setup by hardwiring my consoles and turning the PC into a remote client.

dastallion2
07-22-07, 10:02 AM
I actually plan to change my current setup by hard wiring my consoles and turning the PC into a remote client.

HomerJS123
07-24-07, 01:53 PM
So, I gave up on the netgear and the linksys. I got a D-Link. Seems to work just fine-- however, now the PS3 says UPnP is not available, but it is clearly enabled on the router. Any thoughts?

Oh, BTW, with the new 1.9 FW out, does any one know if this fixed the issues with the linksys?

thehive
07-26-07, 01:49 PM
Oh, BTW, with the new 1.9 FW out, does any one know if this fixed the issues with the linksys?

Not sure. I haven't had the PS3 disconnect on me since 1.9, but I haven't run it for a long stretch on the Media Server though, so it could just be coincidence.

tingham
07-26-07, 07:21 PM
I thought I would post that with firmware update 1.9 my wireless signal strength has increased..anyone else experience this? My router is about 50 ft away in another room and I was getting about 70 to 85% signal strength. Now with the firmware update I am getting 90 to 100%.

dogdoctor
07-27-07, 12:14 AM
I thought I would post that with firmware update 1.9 my wireless signal strength has increased..anyone else experience this? My router is about 50 ft away in another room and I was getting about 70 to 85% signal strength. Now with the firmware update I am getting 90 to 100%.
Mine actually went down to 77-85% on channel 10 so I moved to channel 8 after testing others and now I'm back to 92-100% solid again. Odd why the update would do this.

mngmikes
07-28-07, 11:57 AM
I know the Belkin Pre-N model also works very well with the PS3 60GB version.
you should of made a choice for us who have switched over to the N format as well. I have had it for i believe it will be 3 years in October now and I love it

dogdoctor
07-28-07, 12:53 PM
I know the Belkin Pre-N model also works very well with the PS3 60GB version.
you should of made a choice for us who have switched over to the N format as well. I have had it for i believe it will be 3 years in October now and I love it
Sorry about that mngmikes - I didn't know about N routers back when I got the PS3 and started this thread. I was going off info that I knew about as well as supposed supported signals by the PS3 (b/g but not N according to Sony). You must be connecting to the PS3 on a (g) signal. I keep the list updated with working routers - drop the model number in a post and I will add it to the list.

mngmikes
07-28-07, 02:20 PM
that is the model name "Belkin Pre-N Router" there is no numbers or anything else... just to add i checked the signal strength it fluctuates as low as 85% i have seen up to 100%... is that much change ok for ps3's online play?? i haven't noticed anything so far. take into account the router is in the basement and i am on the 2nd floor. so there is a bit of a distance i know.
oh yeah forgot to say, the ps3 probably does connect at G because the router can connect to B,G, or N.

JD23
07-28-07, 02:33 PM
My brother is having a problem with the Linksys WRT54GS since upgrading to 1.9. Disabling the media server option corrected problems with the previous firmware, but he seems to be having the same issues after upgrading to 1.9. He told me that the media server option is still disabled. Has anyone else had a similar problem?

dogdoctor
07-28-07, 04:41 PM
My brother is having a problem with the Linksys WRT54GS since upgrading to 1.9. Disabling the media server option corrected problems with the previous firmware, but he seems to be having the same issues after upgrading to 1.9. He told me that the media server option is still disabled. Has anyone else had a similar problem?
I've been hearing whispers of problems here and there. I would have him check the routers UPnP status (turn off if on). Also there was thread here recently that posted about a new WRT54G router firmware update (check first post) that some thought might have helped. Not entirely sure since my WRT54G - going strong and has the media share working still.

mbroadus
08-01-07, 03:51 PM
I noticed that the BSSID would also change too - I tried entering in the second mac address and still it did not work either.

Tell me does that work still - any disconnnects and if none for few hours post back and I will update the list above with and alert to test the other routers in the same manner.

If you found it - that is awesome. To bad I don't have the other router anymore to check with you.

I just bought a new Lynksys router and it drops for 10-15 seconds and it took almost 4 hours for me to download Call of Duty 4 Demo last night.

Can you explain how changed the SSID and does this change the SSID for other laptops? Thanks in advance.

dogdoctor
08-01-07, 05:54 PM
I just bought a new Lynksys router and it drops for 10-15 seconds and it took almost 4 hours for me to download Call of Duty 4 Demo last night.

Can you explain how changed the SSID and does this change the SSID for other laptops? Thanks in advance.
When you first set up the router. There should be a specific item in the router setup that is called Broadcast SSID - you should be able to disable this feature. All that means is when the PS3/laptop scans for a network you won't see a network, as the router is not sending out the call signs if you will. You will have to tell the PS3/Laptop to look for network named "X" (what ever you named your network) and then it will find it. Hope this helps.

bguzman
08-01-07, 07:38 PM
I thought I would post that with firmware update 1.9 my wireless signal strength has increased..anyone else experience this? My router is about 50 ft away in another room and I was getting about 70 to 85% signal strength. Now with the firmware update I am getting 90 to 100%.

I have noticed an increase in signal strength, from 50-70% to 80-100%. I am using a Netgear WGR614 and it is about 70 feet away. I haven't had to many problems. Hope I didn't just jinx myself.

bguzman

mbroadus
08-01-07, 08:11 PM
My PS3 is next to my wireless router, can I connect the PS3 via ethernet cable and still be able to use my laptop via wireless?

dogdoctor
08-02-07, 01:47 AM
My PS3 is next to my wireless router, can I connect the PS3 via ethernet cable and still be able to use my laptop via wireless?
Absolutely. You'll likely have a much more stable connection according to some and increased download speeds.

kabttu
08-02-07, 01:00 PM
Currently using:

Cisco 1130 802.11g AP - running WPA-PSK
IPCop box

Everything working great, get full speeds on speedtest and downloads seem very fast.

saturnotaku
08-02-07, 03:29 PM
So, I gave up on the netgear and the linksys. I got a D-Link. Seems to work just fine-- however, now the PS3 says UPnP is not available, but it is clearly enabled on the router. Any thoughts?

I get the same thing with my PS3 wired to my D-Link router and it works perfectly fine. Don't worry about it.

mbroadus
08-02-07, 07:17 PM
Absolutely. You'll likely have a much more stable connection according to some and increased download speeds.

That's what I'll do, it took me 4 hours to download a game demo from the Sony store. Thanks for the info.

corejonp1
08-02-07, 08:23 PM
motorola surfboard SBG900 works

baronvonimel
08-05-07, 12:30 PM
I believe I have the DLink DI-624M MIMO and am experiencing problems.
Disconnects appear to happen every minute to 5 minutes or so. I will try the SSID disable when i get home (at work) and post back if that fixes the issue.

pdp7
08-05-07, 02:35 PM
wrt300n working like a charm for me.

HomerJS123
08-06-07, 12:55 AM
I believe I have the DLink DI-624M MIMO and am experiencing problems.
Disconnects appear to happen every minute to 5 minutes or so. I will try the SSID disable when i get home (at work) and post back if that fixes the issue.


It seems that the ps3 has problems with MIMO routers. I tried a Linksys and Netgear and had TONS of problems-- both were MIMO. The D-Link I have now is not MIMO and is rock solid.

impetigo
08-06-07, 10:39 AM
motorola surfboard SBG900 works

I have a SBG900 as well but when I used it for connecting my PS3 via wifi, I noticed every hour or so I would get disconnected while playing a game on the playstation network. I just have it connected with ethernet now.

whippet_1
08-07-07, 09:16 AM
So, I gave up on the netgear and the linksys. I got a D-Link. Seems to work just fine-- however, now the PS3 says UPnP is not available, but it is clearly enabled on the router. Any thoughts?


I get the same thing with my PS3 wired to my D-Link router and it works perfectly fine. Don't worry about it.

Just got a DIR-655 and it's been bugging the hell out of me. Is there any way to resolve this?? or do u meant o say it's actually working but the ps3 still says "not available". upgraded to this from a wrt54gs that crapped out on me, but that detected upnp no problem.

any help from any1 would be appreciated.

AVDave
08-07-07, 11:12 PM
I have a WRT54GS and for the most part it works. Once in a while after I turn on the PS3 it will "overload" the wireless and I would have to pull the power to restart the router.

mngmikes
08-09-07, 07:43 AM
It seems that the ps3 has problems with MIMO routers. I tried a Linksys and Netgear and had TONS of problems-- both were MIMO. The D-Link I have now is not MIMO and is rock solid.

It's not having problems with all MIMO based routers... I have the Belkin Pre-N wireless router and it is a mimo. It works beautifully considering it's 2 stories below me...no disconnects or anything. I also tried it with the Belkin N1 mimo router while visiting my sister and it works just as well

baronvonimel
08-11-07, 03:22 AM
It's not having problems with all MIMO based routers... I have the Belkin Pre-N wireless router and it is a mimo. It works beautifully considering it's 2 stories below me...no disconnects or anything. I also tried it with the Belkin N1 mimo router while visiting my sister and it works just as well

Well I have a question for you techys on the forums here -
In reference to my problem dropping the network, I have not fixed it yet, partly because I am lazy - and its due to my configuration:

I have a Linksys etherfast cable/dsl 4 port router/switch as my router. I also have the Dlink DI-624M I mentioned in my above post but I disabled DHCP on it and I have it functioning purely as a switch for my wireless components. That is connected from port 1 on the Dlink to port 4 on the Linksys to allow the Dlink wireless connections to passthrough and allow the Linksys router to assign IPs to the wireless connections. I know its a screwy setup but as far as I can tell, the Dlink router component and firmware flat sucks. (I went through two of them as a standalone router/switch before moving to this current configuration).

In order for me to turn off broadcasting on my Dlink, I have to reset it (in order for it to assign itself the default IP), go into the firmware and turn that off, and then turn off DHCP, reconnect it to the above configuration and hope to God that all just worked :). So I haven't done that yet. I am expecting I will find the courage tomorrow, barring any outbreaks of "I dont want to screw with this today" syndrome.

The odd thing is, I do get a connection with both my Wii and PS3 - good enough for me to complete downloads on both. I do not, however, see any IP assigned to either my PS3 or Wii in my router LAN client table.

I am wondering if any of you might know why that is. Also, is there a better way to optimize my configuration (aside from the obvious - trash both and buy a new, dependable router/switch with wireless capability)?

As always, much thanks to this community.

PaulGo
08-16-07, 01:15 AM
Got another PS3 it came with firmware 1.51. Tried to estableish a wireless connection with no luck. Update the firmware via a usb stick to 1.90 and I established a connection without changing any settings. Apparently the latest firmware makes it a lot easier to connect.

kev999
08-21-07, 01:29 PM
i'm using Linksys WRT150N wireless router and i set my security level at WPA2, but my brand new PS3 only supports WEP and WPA, can this be fixed by a firmware upgrade?

tgyi16
08-25-07, 08:20 PM
ty roco1290 you're right. my Linksys router befw11s4 doesn't work either. it used to work but it doesn't now.

tgyi16
08-25-07, 08:43 PM
can someone please help me through the process of the DMZ thing.

dogdoctor
08-26-07, 07:13 PM
i'm using Linksys WRT150N wireless router and i set my security level at WPA2, but my brand new PS3 only supports WEP and WPA, can this be fixed by a firmware upgrade?According to the image in section 8 of the online manual under settings/network/wireless there is an image of selecting on the PS3 WPA-TSK/WPA2-TSK. I've seen other posts online as well with WPA2 and it appears the PS3 does support WPA2. So...are you certain your entering everything properly? I would just be sure your selecting the appropriate WPA2-PSK or WPA2-TSK whichever you used in the router. If that still is a no go, then it's likely a communication error with the router and the PS3.

dogdoctor
08-26-07, 07:21 PM
can someone please help me through the process of the DMZ thing.
First. If you haven't already, you need to set up the PS3 wirelessly with a Static IP address. Once that have been done you can go into the wireless router and click on the Application/Gaming tab. In a sub category there is a tab called DMZ. You simply click enable and enter the IP address of the PS3 that you want DMZ'd. It's really not that tricky. Good luck.

PS - what problems are people experiencing with befw11s4 router now? I thought all problems had been ironed out in the past (see the first post of this thread).

missyrelm
08-26-07, 08:32 PM
Can anyone recommend a good router to use on a wired connection that has a reputation for being fast and not disconnecting or causing other problems?

I'm happy to get older stuff if it works just as well.
I've looked at the D-Link DI-604, which gets good reviews even tho its old, but I have no idea if works well with PS3.

Of course there's always the DGL-4300 but it seems like major overkill for someone who doesn't even plan on using a wireless connection, not to mention the expensive $70 adapters (If I need 2 for each computer and a third for the PS3, that really adds up.)

I've pretty much blown my load getting a 40" HDTV, up-converting DVD player and the PS3 (coming in the mail), so cheaper is MUCH better, but I'd rather not get something that is known to have problems with PS3 just to save money.

dogdoctor
08-26-07, 09:31 PM
Can anyone recommend a good router to use on a wired connection that has a reputation for being fast and not disconnecting or causing other problems?For many of us including myself the Linksys WRT54G has been rock solid (with a few tweaks of course). If you sift through this thread you will likely see pros and cons of some. Also if you check the first page I've tried to tell people what options/problems tend to arise with each router and how to avoid them. It's not perfect but a good start.

dobes918
08-28-07, 07:45 PM
anyone trying to connect a D-Link DIR655 to their ps3? I returned my Belkin N1 b/c kept disconnecting from media server. The D-Link is now doing the same thing. Appreciate any help. Thanks!

dogdoctor
08-28-07, 09:33 PM
anyone trying to connect a D-Link DIR655 to their ps3? I returned my Belkin N1 b/c kept disconnecting from media server. The D-Link is now doing the same thing. Appreciate any help. Thanks!Have you tried disabling the UPnP option in the router? That is what is causing a lot of linksys router headaches when using the media server feature on the PS3. Also I know you returned the N1 but did you follow the firmware update and steps outlined in this thread and others to try to get it to work. Just looks the first post and see the N1 update.

dobes918
08-29-07, 11:15 AM
Have you tried disabling the UPnP option in the router? That is what is causing a lot of linksys router headaches when using the media server feature on the PS3. Also I know you returned the N1 but did you follow the firmware update and steps outlined in this thread and others to try to get it to work. Just looks the first post and see the N1 update.


Just tried disabling UPnP at your suggestion, still drops media server connection after 4 minutes or so. Also, before disabling UPnP, PS3 said UPnP "Not Available"

Regarding the Belkin N1, I tried pretty much everything in this thread, other avs threads, and other forums. Others said they got it to work just fine by enabling UPnP, but that didn't work for me either. The D-Link dir655 gives me better signal strength (95% compared to 85%) anyway, plus its predecessor is known to work with the PS3. I'm thinking its just a settings quirck that someone out there has already found the correct protocols for the dir655...

Wolf11
09-01-07, 10:38 PM
Hey I've had the D-Link DIR-625 since i got my ps3 at launch and it is really bugging me.... it has gone about 2 months without problem but after that is on and off. the ps3 gets disconnected after 5 min and wen i try a few hours later it connects for about 1 hour...this is how it has been. Now that i got warhawk the connection is in one of its 'bad' moods and doesnt want to work. ive tried DMZ, static ip, the Qos engine with no solution. my router is 2 floors above the ps3 and i would like anyone who has this router working to play post their settings. Also using WPA2 seemed to make the connection worse.

dgjr
09-05-07, 05:33 AM
i use Netgear WGR614.

rolltide1017
09-07-07, 05:56 PM
Just got a PS3 the other day. My router is already on the list but, I'll list it again anyway. I have the D-Link DGL4300 and it works great so far. I have downloaded 4 or 5 game demos with no problems.

slicknick1986
09-13-07, 12:39 AM
I have been using the D-Link DI-614+ with my PS3 connected to it through the wireless for about four weeks now. Works pleasantly with the router's latest (and last) firmware, using WPA and a static IP for the PS3. NAT Type 2 is shown. Signal strength is anywhere from 80 to 100% with about 20 feet between the router and PS3. That 20 feet is intersected by a few notably thick walls, though (I live in an apartment).

As a side note, I've also played Warhawk online while having Internet browsing going on with 3 other LAN clients (2 wireless PCs and the main PC), and have also tried Bit Torrent downloads while playing Warhawk. I have not noticed any latency or disconnects during these situations, so it appears that the DI-614+ is quite robust considering it is only 802.11b (and mine is over 3 years old and has gone through heavy usage).

I am looking to upgrade to a 802.11g router for potentially faster wireless throughput (especially for LAN transfers) and longer range, but for now the DI-614+ definitely does its job on the wireless end with the Playstation 3.

EDIT: One note though about using DMZ with the DI-614+. I have had no success with putting both Playstation 2 or Playstation 3 under the router's DMZ, as I had trouble connecting to game servers or using certain features (such as voice chat). I have a feeling there is something buggy with the router's DMZ setting. No big deal though, as port forwarding the applicable PSN ports works just fine.

- Nicholas

tomeb
09-17-07, 06:06 AM
i jist purchased a 2 wire gateway from att i have a 60gb ps3 i hooked it up and all was well i could download demos and the 1.93 update however when i tried to play fight night online i get booted even though my sigmnal is 85-90
please help this is so frustrating

dobes918
09-18-07, 08:39 PM
For anyone getting the "Disconnected from media server" message, I have been struggling with this since buying my 60gb PS3 a couple months ago. I have been through the Belkin N1, Dlink dir655, and am now on the new gigabit Airport Extreme. All three would stream media to the PS3 for about five minutes and then disconnect and reconnect immediately. I tried virtually every setting for each router with no success. HOWEVER, I believe I found my problem. My PC that I am attempting to stream media from is hardwired to my router. However, it also has a built in wireless adapter. So, my PC was connecting to the router both wired and wirelessly. This did not cause me a problem until I attempted to use my PS3 so I never paid attention to it. Apparently, however, this dual connection of my PC to my router was causing connection problems between my PC, router, and PS3. Disabled my wireless connection settings on the PC and now am streaming media to PS3 with NO PROBLEMS!!! Thank god, finally! Admittedly, I feel a little stupid for not seeing this problem earlier. Anyway, hope this can help someone out there.

splinters
09-18-07, 11:55 PM
i jist purchased a 2 wire gateway from att i have a 60gb ps3 i hooked it up and all was well i could download demos and the 1.93 update however when i tried to play fight night online i get booted even though my sigmnal is 85-90
please help this is so frustrating

A couple of things to try out.

#1) turn off uPnP on your router (if enabled)
#2) select "54 Mbps" only mode
#3) Change the channel it is on (channels 1 and 11 are usually good choices for lowest amount of interference)

Hope that helps!

-Splints

DJ Kuul A
09-20-07, 03:41 PM
My Buffalo WHR-G125, configured simply using the included setup disc and instructions (with a key that I made by just banging random keys and then writing it down ;) ), works perfectly with my PS3.

I've only used it for a couple of days, but I don't really foresee any problems at this point. Haven't tried online gaming, though, so I don't know how the speed is. Just web browsing and overnight game demo downloads.

Doppler Bob
09-28-07, 10:19 AM
Right now I split internet with my neighbor who lives about 70 feet away in an apartment across from mine. He has an Airport router that I can receive the connection on, but I get about 30-40% connectivity, with terrible lag while playing online.

I've been researching antennas, and noticed there is nowhere to add an external antenna on one. I haven't seen his, but I'm assuming he has the newest one. I've noticed there is a modification you can do, but I'm assuming he will not want to void the warranty and let me cut up his $150 router. Is there anything non-destructive that I can do to boost the signal, be it on his end or mine??? PLEASE help!

vbiro
10-06-07, 01:11 PM
Hey, thanks for the great info. I have a sony HDV camcorder and, of course, the HD movie files are very big on my computer. Since I don't have a Blu-Ray burner yet, I'm having trouble getting the movies onto my TV to watch. I figured I'd try streaming them, but my 802.11g router doesn't seem fast enough and the HD videos are all choppy. It seems since the PS3 is only "g" capable, an "n" router won't do me any good. I have two questions:

(1) Is it expected that the PS3 will be updated with "n" capabilities with a software update? Or is this a hardware issue that will prevent my PS3 from ever being "n" capable?
(2) Since my router is upstairs in the office with a direct wired connection to my desktop, I was wondering if it would be possible to reverse this and get faster streaming by purchasing an "n" router, but putting it in my living room with a direct wired connection to the PS3 and a wireless "n" connection to my PC. Would this allow me to stream from my wireless "n" connected PC to my wired PS3 at "n" speeds? If this is possible, it seems that it would address the issue. I'm not certain whether the server, my desktop PC, needs to be on a wired connection to function. Please advise.

Many thanks!

3Aims
10-12-07, 08:43 PM
Just to follow up, I have recently added Verizon FIOS service and as part of the package deal, Verizon gives you a Actiontec MI424WR wireless router. I was skeptical of this router being better than my Linksys, but it is indeed a solid performer. Wireless performance to the PS3 is great and all features work just fine. I have the PS3 set up to get its IP address manually and SSID is off. UPnP had to be switched on and I just had to change the DHCP assignment range on the router to reserve a few static addresses for the PS3, laptop, and desktop I have. I use WPA-TKIP encryption. The default is WEP so that has to be switched off to allow WPA.

I have the same router and I need help. The PS3 can't find an ip address when testing. Can you help me?

AmigaDude
10-15-07, 03:09 PM
..
(1) Is it expected that the PS3 will be updated with "n" capabilities with a software update? Or is this a hardware issue that will prevent my PS3 from ever being "n" capable?
Not likely, It is a hardware issue, and I seriously doubt that any extra (n capable) chips are sitting unused in the PS3.

(2) Since my router is upstairs in the office with a direct wired connection to my desktop, I was wondering if it would be possible to reverse this and get faster streaming by purchasing an "n" router, but putting it in my living room with a direct wired connection to the PS3 and a wireless "n" connection to my PC. Would this allow me to stream from my wireless "n" connected PC to my wired PS3 at "n" speeds? If this is possible, it seems that it would address the issue. I'm not certain whether the server, my desktop PC, needs to be on a wired connection to function. Please advise.

Possible, yes. You are then only limited to the slowest connection (wireless N), assuming you have a 100mbs wired connection between the router and the PS3. You can hook this up multiple ways, with fully wired being the most reliable, of course. However, doing it just as you described should work just fine.

VesNL
10-15-07, 08:39 PM
Try this FW update for the router...

WPN 824v2 FW update (ftp://downloads.netgear.com/files/wpn824v2_2_0_10_na.chk)

I had similar problems last month. Here lately I've lost connection once or twice since the FW update.

Router settings...

I've reserved an IP for the PS3.
Use WPA security.
Disabled SSID.
Setup wireless card access for the PS3.
Changed MTU size to 1400 per Netgear support.

I also did a custom setup for the PS3's wireless setup. In that setup I disabled UPnP. I also disabled the media server.

Hope some of this will be useful.

My settings are about the same.

I moved from 'unsecure' to WPA' from there I tried to move to WPA2 but it didn't work switched back to WPA, then my PS3 couldn't connect (key time-out) Then I set it back to unsecure and moved 'up the ladder' again to WPA, it started working again and left it like that. Had to change all the appliances linked to my router (printer, PSP, PC and while I'm writing this I realise my 360 has to be done aswell)
I rather use WPA2 but aleast I got a decent security with WPA

I disabled the SSID aswell, only I left the MTU on automatic. I never realized the PS3 had trouble with some Netgear router untill I couldn't connect and read the thread here.
But luckily the WPN824_v2 (with an ISP firmware on it) works fine with it (so far)

BIGDINZ
10-15-07, 09:22 PM
Linksys WRT54GX4
I've tried:
restarting modem/router
static IP with port forwarding/DMZ
Switching wireless channel
Allowing just my PC and PS3's mac addys and disabling WPA

Nothing has fixed my problem of constant disconnects from the Playstation Network, but I can still browse the web perfectly on it, which really frustrates me (browser works great, can't sign into PSN)

I have this same router. I can connect fine but when I play is when the problems start(wireless "g" only). I did a speed test at speakeasy and I saw that the connection was go / stop. I mean on my computer the speed was steady but on the PS3 it would pause every sec or so across the visible speed line. I plan on getting a new one as soon as I can, what a waste.

BIGDINZ
10-15-07, 09:27 PM
can someone please help me through the process of the DMZ thing.

It's usually in the gaming section of your router's setup. Router make and model will be needed to further assist.

JackBau3r
10-17-07, 01:07 PM
Please someone help me, especially for those that live in Florida. If not, then I'm sure someone here has knowledge on my problem!

I recently got a new internet provider, Brighthouse. My old internet provider was Verizon DSL. When I went online with my PS3, I brought the modem in my room and hooked everything up. I used the PS3 ethernet cable to connect to the DSL modem to the back of the PS3, the phone line to the jack in my room to the back of the DSL modem and plugged in power supply unit.......now here's the problem with my new modem:

With my new modem from brighthouse, it come with your standard modem box, ethernet cable, the PSU, and (the odd part) a router, that white cable that's connected to the wall and to the back of the modem box. Now when I try and set up the new modem in my room to the PS3, I plug in the PSU, the ethernet cable to the back of my PS3 to the modem and that's all I can do. I try and go online but I get an error. I try and go to network and connections to see if everything is right and do a test run, and what I get is that the IP address is successful but the connection failed.

So does anyone know the problem? I tried disconnecting the power supply unit from the modem for 2 minutes and nothing. Did the same for my PS3.

I really miss downloading demos and playing games online. If anyone can help me, I would greatly appreciate it.

AmigaDude
10-17-07, 03:31 PM
Jack .. I'm guessing that you have a Motorola cable modem, since that is what I recall other Brighthouse vicitms (uh, users) having. If I'm reading your right, you were sent a Router.

Two things -

1) You need to get the modem working b4 worrying about the PS3, and that normally means using a PC to verify. You can/should use this type of setup;

Cable Modem -> (RJ59 cable) -> Working Cable outlet
Router -> (ethernet cable) -> Cable Modem ethernet port
PS3 -> (PS3 ethernet cable) -> Router
PC/Laptop -> (ethernet cable) -> Router

2) You might have better luck getting specific answers at dslreports.com, where there is a wealth of technical experience on setting up the modem.

hiko13
10-17-07, 06:20 PM
Well, here's my issue...right now I've got a Netgear WGT624v3. Worked without a hitch for a while, but sometimes (anywhere from daily to once every 2 weeks) it drops connection for no apparent reason and picks it back up anywhere from 5 minutes to an hour later. Right now I've got my PC and PS3 running wirelessly while I finish up putting my HT room together. It should be done next week at which point they'll be hardwired back in (as well as my 360), so I'll try upgrading the firmware and seeing if that helps.

In the meantime does anyone have any other ideas? Since I've got Netgear adapters already would I need a Netgear router as well if I have to buy a new one, would another brand work acceptably, or is it YMMV?

tingham
10-17-07, 06:35 PM
I think once you upgrade to the newest firmware for that router you should be fine...I have the same router. If not, any router should work fine with your adapters.

VesNL
10-18-07, 08:49 PM
Forgot to add, I have two PCI adapters in my PC, one of Linksys WMP54G and a Netgear WPN 311. With my 311 I had some issue like not being able to use my printer directly (wi-fi on it) with the 54G it works normally.
Now when I had my PC hooked up to my router (WPN824_v2) by cable I could use the Media server on the PS3, but when going wireless with the 311 it couldn't find it. Then I tried it with the 54G and it could find my PC/PS3.

So in short, when you have the WPN 311 you can't use medis server. And if you have the WMP54G you can.

My next problem is solving my sudden decrease in speed in my network

phipp01
10-31-07, 02:22 PM
I have a Motorola surfboard sbg900 with Brighthouse in central FL and after calling and registering the MAC address the PS3 can not obtain an IP address. Any suggestions would be appreciated. The wireless light is lit up so I am assuming the wireless part is working. The PS3 just keeps coming back saying the access point was not detected. HELP!!!!

mmafightetnow
11-07-07, 03:51 PM
Belkin g

splinters
11-07-07, 05:23 PM
Hey, thanks for the great info. I have a sony HDV camcorder and, of course, the HD movie files are very big on my computer. Since I don't have a Blu-Ray burner yet, I'm having trouble getting the movies onto my TV to watch. I figured I'd try streaming them, but my 802.11g router doesn't seem fast enough and the HD videos are all choppy. It seems since the PS3 is only "g" capable, an "n" router won't do me any good. I have two questions:

(1) Is it expected that the PS3 will be updated with "n" capabilities with a software update? Or is this a hardware issue that will prevent my PS3 from ever being "n" capable?
(2) Since my router is upstairs in the office with a direct wired connection to my desktop, I was wondering if it would be possible to reverse this and get faster streaming by purchasing an "n" router, but putting it in my living room with a direct wired connection to the PS3 and a wireless "n" connection to my PC. Would this allow me to stream from my wireless "n" connected PC to my wired PS3 at "n" speeds? If this is possible, it seems that it would address the issue. I'm not certain whether the server, my desktop PC, needs to be on a wired connection to function. Please advise.

Many thanks!

As mentioned, the answer to #1 is no, the h/w is 11g, not 11n and therefore not a firmware upgrade (11n will need at least 2 more antenna's to be a true N/MIMO device).

For #2 I would recommend utilizing a powerline networking product Linksys PLK200 (http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1166859583396&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=8339627773B03)

Hope that helps!

-Splints

coneyparleg
11-08-07, 12:58 PM
I am using the above noted router. I currently keep the PS3 in DMZ and it works, however while UPNP is enable on both the router and the PS3, the PS3 connection status shows UPNP as 'not available', I believe this was also the case before I put the PS3 in DMZ (was the reason I did so) is there anyone with this router that can provide insight? I would like to have the PS3 using UPNP if possible

thx

VesNL
11-12-07, 12:40 PM
With firmware 2.0 my PS3 is still working like a charm with my Netgear WPN 824_v2. It even solved my problem I had with my music folder not being recognized and some video's that showed problems streaming.

Bobington
11-16-07, 04:25 PM
Set Up: WRT54v6, no security, uPnP, G-mode only. 60 GB PS3.

If something else uses the wireless then the PS3 dies completely ONLY when it's using the PSN, for browsing the web the connection is solid.

I've fooled with every possible setting on the router, on the modem, on the PS3, static IP, automatic IP.

I am going out of my mind. I have like 10 games I still haven't played and I can't bring myself to play them because this problem is gnawing at my brain.:mad:

dogdoctor
11-16-07, 07:37 PM
Set Up: WRT54v6, no security, uPnP, G-mode only. 60 GB PS3.

If something else uses the wireless then the PS3 dies completely ONLY when it's using the PSN, for browsing the web the connection is solid.

I've fooled with every possible setting on the router, on the modem, on the PS3, static IP, automatic IP.

I am going out of my mind. I have like 10 games I still haven't played and I can't bring myself to play them because this problem is gnawing at my brain.:mad:
Try 1) updated the firmware of the router. See the very first post.
Try 2) dissabling the UPnP in the router - that caused some of us problems with the WRT54G.
I have Router - static IP, WPA, DMZ, UPnP (off)
I have PS3 - Media Sharing On, Remote Access Off. Try turning the ticker at the top of the PS3 off too. You never know.

Bobington
11-16-07, 09:30 PM
Try 1) updated the firmware of the router. See the very first post.
Try 2) dissabling the UPnP in the router - that caused some of us problems with the WRT54G.
I have Router - static IP, WPA, DMZ, UPnP (off)
I have PS3 - Media Sharing On, Remote Access Off. Try turning the ticker at the top of the PS3 off too. You never know.

I spent the last 5 hours thinking and I fixed it.

My old setup was, Modem gets IP from ISP, Router gets IP from Modem, PS3 got IP from Router.

That meant I had double DHCP servers and double UPnP servers which probably confused the PS3.

Solution: Switch the Router from Gateway mode to router mode and let the Modem itself assign the addresses.

Why it works? The PS3 opens ports directly on the Modem using UPnP instead of asking the router to open a port then asking the modem to open a port.

It takes me 5 seconds to log on to PSN and my NAT went from 3 to 2.

p.s. Only works if your modem has a DHCP server and is UPnP compliant.

montanaxvi
11-25-07, 04:56 PM
60 gig PS3
Linksys WRT54GL running WW-DRT firmware

I just went wireless though, at my old apartment I had a wired connection with a BEFSR41 and never had any problems, but with the new wireless connection it seems that downloads are HORRIBLY slow compared to what I am used to with the wired connection, ONLY on the PS3 though, all my other laptops connect with the same wireless router and the speeds are fine on any applications.

duga6
11-25-07, 09:06 PM
I've been searching for weeks regarding the issue of media servers and the PS3 and still am striking out.

My setup is a bit unique and I'm thinking that one of my components has a setting that's wrong. I have DSL coming into the house and directly into my wireless router WRT54G (with update firmware). The router is set to WEP-128, key 1, UPnP disabled, and DHCP enabled. I have a WGA54G (Linksys Wireless Gaming Adapter) in the family room in order to get a better connection with my router (since the PS3's wireless range is somewhat limited). Also in the family room, I have a Dynex ethernet port replicator since my HD DVR has internet capabilities along with my PS3. So the PS3 is wired into the port replicator, which is wired into my gaming adapter, which wirelessly connects to my router, to my DSL to the internet.

Once I boot up the PS3 and chose my screen name, it logs me into the PSN...no problem (most of the time). And when my laptop or desktop runs the Windows Media Player 11, the PS3 will initially detect it, and will even load a picture. But after 2-10 seconds, I get the "disconnected from the media server" message and it will no longer recognize either the laptop's or the desktop's WMPv11.

So, the PS3 can connect to the PSN, I can download content, and play online...no problem. But I can't stream pics, videos, etc. from my computers to the PS3. I have media sharing enabled on WMP11. And once I get "disconnected from the media server", it logs me out of everything and I have no access to the PSN, internet, etc.

So, obviously, the first question is...why won't media sharing work? Second, are my settings correct on all components? Do I need to enable DHCP on the router AND gaming adapter? Or does the DHCP on the gaming adapter screw things up?

Here are my PS3 settings:


UPnP Disabled
Conn. Method Wired
Speed and Duplex Auto-detect
Address Settings Manual
IP 192.168.1.250
Subnet 255.255.255.0
Default Router 192.168.1.1
Primary DNS 192.168.1.1
Secondary DNS 192.168.1.1
MTU Automatic
Proxy Server Do not use
UPnP Disabled
NAT Type Type 2
Media Server Connection Enabled


Anything look strange here?

Thanks.

sb1
12-04-07, 12:11 PM
Many thanks to you guys that have been sharing tips for this. After reading through several pages and doing the things suggested, I've finally gotten my WRT54GS to work reliably with my PS3. No drops and faster operation while signed in. Thanks again.

MarkyM
12-04-07, 02:22 PM
Cool! Would you mind summing up exactly what settings you are using now that work reliably?

Thanks!,

--M--

Many thanks to you guys that have been sharing tips for this. After reading through several pages and doing the things suggested, I've finally gotten my WRT54GS to work reliably with my PS3. No drops and faster operation while signed in. Thanks again.

sb1
12-05-07, 11:26 AM
Cool! Would you mind summing up exactly what settings you are using now that work reliably?

Thanks!,

--M--

I'll post what I did, but where the fix came from I can't pinpoint.

Upgraded to the latest firmware (I was behind on this one, it came out in June I think).

Changed frequency channel on the router from 6 to 11.

Disabled UPnP.

I did something with the firewall in the router, but I'll have to check on that one.

I had the same connection problems when the PS3 was wired. Drops and super slow downloads. Now it's running great wirelessly. As a side note, when the only thing I did was change the frequency on the router, the Xbox 360 now gets a solid full four bar connection all the time. Before it was just three.

*Maybe I won't get banned for say Xbox here.:D

curtlots
12-13-07, 09:55 PM
On a whim, I reset my PS3 to factory defaults and am now able to connect again.

Long story, somewhat short. I was trying to tweak my Linksys WRT54G for even BETTER performance, so I attempted to download the latest update. My connection had been perfect for a long time. That started four days of router hell. I scoured all the threads & tried everything, to no avail. I finally figured my time was worth more than all the hours of messing around, so I just bought a new router having figured mine was bricked. I bought the same thing & figured I could just run the setup, let the PS3 find the connection automatically, and have instant connection. I was wrong. I spent last night doing all the tweaks & still nothing. Tonight, after more messing around, I got ready to call the Sony helpline (?). Out of desperation and not really looking forward to a night of fine conversation with the folks at Sony, I decided to reset the PS3.

Well, after going through the initial setup, I tried the connection and low and behold it worked! Maybe this will help someone else out there.

Best of luck!

ia21
12-15-07, 09:19 PM
I bought a Belkin N Wireless Router #F5D8233 for my husband for Xmas. I called Belkin and asked if this router was compatible w/ a PS3 and was told yes, and to call them when I was ready to hook it up for directions. However, I've been told that it isn't compatible with PS3 and I'm better off getting a G wireless router. We have a Mac, so whatever router we get has to be compatible with Macs too. Should I return the router and get something different? Anyone had any luck with this brand?

tingham
12-16-07, 12:25 PM
I bought a Belkin N Wireless Router #F5D8233 for my husband for Xmas. I called Belkin and asked if this router was compatible w/ a PS3 and was told yes, and to call them when I was ready to hook it up for directions. However, I've been told that it isn't compatible with PS3 and I'm better off getting a G wireless router. We have a Mac, so whatever router we get has to be compatible with Macs too. Should I return the router and get something different? Anyone had any luck with this brand?

Some Belkins's have proved to work with the ps3. I would not worry about it. Give it a try..and if it does not work, you can take it back and exchange it for something else.

dogdoctor
12-18-07, 04:09 PM
I bought a Belkin N Wireless Router #F5D8233 for my husband for Xmas.Can you post back if it works.

coneyparleg
12-19-07, 12:31 PM
I had a belkin N for a day and it worked but seemed unstable and I felt like my connection wasn't as strong as the linksys that I had prior.
I now have a d-link 625 and smooth sailing for me

Bundey
12-23-07, 12:36 PM
I have a Linksys WRT54G version 2.2, will that work?

davethestalker
12-24-07, 04:31 AM
I have a 2Wire 1701HG with my 60GB PS3 with a wireless gaming adapter (2Wire) upstairs. Both work perfectly fine, always have. It can manage 5 wired and 10 wireless "computers". We are currently running on a 512 up DSL connection (had to cut back for financial reasons), but that will go back up to 768 up in a couple of months.

sb1
12-24-07, 05:20 PM
I have a Linksys WRT54G version 2.2, will that work?
I can't imagine why it wouldn't. That's the same router I have, except mine was version 1.6, then upgraded to the latest firmware. Everything works great.

khowe22
12-27-07, 10:59 AM
I bought a Belkin N Wireless Router #F5D8233 for my husband for Xmas. I called Belkin and asked if this router was compatible w/ a PS3 and was told yes, and to call them when I was ready to hook it up for directions. However, I've been told that it isn't compatible with PS3 and I'm better off getting a G wireless router. We have a Mac, so whatever router we get has to be compatible with Macs too. Should I return the router and get something different? Anyone had any luck with this brand?

I have this same router and it works perfectly. Seems very stable with a 95% signal strength. Downloads are very fast and so far I have seen no online gaming issues (played COD4, UT3, and Warhawk).

avdo
12-29-07, 05:25 AM
I have changed from the dreaded Netgear DG834PN to a Billion BiPAC 5200G R4 running current firmware and it runs like a charm. uPNP available & NAT 2.

I'd also like to mention that my friend runs exactly the same setup and it works perfectly for him.

In both cases they are running 60 Gb PS3's wirelessly. Between 90 - 100% signal ( channel 4 & 9 tried ) Even better, they can be had for under £40.00 !!!!

HTH

Avdo.

PRETTY E
01-02-08, 05:11 PM
I just came from my brother in law's house and hooked up his PS3 to the Linksys WRK54g router. It worked just fine.

TonyLukes3
01-06-08, 10:34 AM
Using 2.10 here with Apple Airport Extreme base station. No problems other than slower than expected downloads. Anyone else find this to be the case with this particular router? I hook up a 50' cable whenever I want to DL anything large, but I'd love to eliminate the need for this!

Budysr
01-06-08, 01:41 PM
New PS3 owner. I have a Netgear WGR614 v.6 with the latest firmwear update and CAN NOT get this thing to work properly with the PS3's wifi. I can get online but have painfully slow web browsing, constant media server errors, and lots of inconsistencies with the connection. I can test the internet connection and it will work five times in a row, then test it again and it will fail:mad: I am also unable to register on the PS network. The setup pages take forever to load and eventually I wind up with something like a server error, or unable to connect to server and all progress is lost:mad: I use a laptop and also a Roku soundbridge on the wireless network and both work beautifully. When I setup the network on the PS3(done this a million times already) I show the router with a 100% signal strength. Havent tried hard wiring because router is in another room. Gone through every router setting imaginable and still can't get this thing to go. A call to Sony tech support (of course) is useless as they wont even take the call due to "high volume" or whatever excuse they had. Anybody got any ideas?

Budysr
01-07-08, 10:28 PM
Gave up on the wireless connection with this router and went ahead and ran an ethernet cable to the PS3. I tried everything with this router and yet it still works great with my other wireless devices. Anyway, the PS3 has no connection problems now at all being hard wired.
If it helps anybody for future reference, chalk up another Netgear WGR614 v.6 as being a router that the PS3's wifi doesn't like to play nice with:mad:
The bright side though for me is that my connection is fast as hell, double what it was before(WHEN it actually worked)

dogdoctor
01-08-08, 01:11 AM
Gave up on the wireless connection with this router and went ahead and ran an ethernet cable to the PS3. I tried everything with this router and yet it still works great with my other wireless devices. Anyway, the PS3 has no connection problems now at all being hard wired.
If it helps anybody for future reference, chalk up another Netgear WGR614 v.6 as being a router that the PS3's wifi doesn't like to play nice with:mad:
The bright side though for me is that my connection is fast as hell, double what it was before(WHEN it actually worked)
I just sent a PM off to Daniel L, bdoyledimou, and gamelover360. They are the folks that posted about its use. I know you moved on to hard wired, but before I drop the router from the working list, I'll see if anyone still has it working.

Budysr
01-08-08, 09:40 AM
Fair enough. I did search the threads on this router before I gave up and couldn't get a good feel for whether it worked well or not. I know some had trouble and maybe somebody claimed to have it working with no problems but I could be wrong.

dogdoctor
01-08-08, 11:19 PM
Fair enough. I did search the threads on this router before I gave up and couldn't get a good feel for whether it worked well or not. I know some had trouble and maybe somebody claimed to have it working with no problems but I could be wrong.PM bdoyledimou. He got back to me and claims his is up and running fine. Maybe he can help you out with settings.

Budysr
01-09-08, 10:52 AM
Thanks Dogdoctor but my PS3 is hard wired now so I don't need the wireless for it anymore. It worked out for the better anyway as its much faster wired and more secure too.

dogdoctor
01-09-08, 12:38 PM
Thanks Dogdoctor but my PS3 is hard wired now so I don't need the wireless for it anymore. It worked out for the better anyway as its much faster wired and more secure too.It is all good. Just now you have a name to contact if you ever need to go to wireless. Take care.

Dave_6
01-10-08, 05:10 PM
I need some help. This thread is long, so I havent read the whole thing. Here's the deal:

For over a year Ive had cable internet (thru my cable TV service) in my house, so I had a wired connection running to my PS3 and Xbox 360. Over a week ago I switched to DirecTV and they do not offer internet in my area. I do now have wireless internet thru Sprint though. I am using one of their wireless USB modems on my desktop and it works great and seems to be faster than my cable setup was.

Now that I dont have a wired modem to run an ethernet cable from to my consoles, what do I need to get them back online? I know the PS3 is wifi capable, but the 360 isnt. Can someone help me with this and tell what equipment I need to get to get it all working again?

Bobington
01-10-08, 05:47 PM
I need some help. This thread is long, so I havent read the whole thing. Here's the deal:

For over a year Ive had cable internet (thru my cable TV service) in my house, so I had a wired connection running to my PS3 and Xbox 360. Over a week ago I switched to DirecTV and they do not offer internet in my area. I do now have wireless internet thru Sprint though. I am using one of their wireless USB modems on my desktop and it works great and seems to be faster than my cable setup was.

Now that I dont have a wired modem to run an ethernet cable from to my consoles, what do I need to get them back online? I know the PS3 is wifi capable, but the 360 isnt. Can someone help me with this and tell what equipment I need to get to get it all working again?

You will have to set your computer to host the internet connection, then run an ethernet cable from your computer to a router then to the XBOX and PS3.

Dave_6
01-10-08, 05:49 PM
You will have to set your computer to host the internet connection, then run an ethernet cable from your computer to a router then to the XBOX and PS3.

PM me if need be, but how would I do that? I know the basics of PCs and thats about it :D

Bobington
01-10-08, 07:21 PM
PM me if need be, but how would I do that? I know the basics of PCs and thats about it :D

It'd be under set up home network in XP.

Then hook your PC up to a regular router with the PS3 and Xbox also hooked up. Your PC should share it's internet connection with them.

Dave_6
01-10-08, 08:05 PM
It'd be under set up home network in XP.

Then hook your PC up to a regular router with the PS3 and Xbox also hooked up. Your PC should share it's internet connection with them.

Thanks! Can you recommend a good router with 3 or 4 ports that will work with both consoles and a HD DVD player?

Bobington
01-11-08, 05:51 AM
Thanks! Can you recommend a good router with 3 or 4 ports that will work with both consoles and a HD DVD player?

Every single router in existence will do the job dude.

BigMitsiFan
01-12-08, 11:23 PM
Received a PS3 for Christmas (God, I love my wife!:D) and have had nothing but headaches with the PS3 and my old Linksys WRT54GS v2 (yes, it has the most recent firmware....).

My first attempt was wireless. Ugly. PS3 would connect, but 15-20 minutes later....nothing (not entirely true....browser would sometimes work, it was usually the Playstation Store log in ability that went first). Not only that, my other PC's would suffer intermittant connectivity (wired and wireless) and the Linksys required frequent power cycles.

Considering that I've had this router for nearly four years and I'll bet I've only power cycled it three or four times while troubleshooting, I knew the PS3 and this router were not going to play nice.

So, I ran a wire to it. Things took longer to screw up, but, ultimately, the same result.

I poured over this thread, googled, etc., no love. Today, I decided it was time to bring my home network up to some sort of current status and CC has the DGL-4500 on sale, so I went for it.

It's been a whole 12 hours and everything is still working! I set up the PS3 on wireless with WPA (which I tried with the Linksys :eek:), no issues and PS3 reports NAT2 instead of 3 (not sure that's important, just noticed the change).

So, add (crossing fingers) DGL-4500 v1.2 firm to the list of working! I'll post any issues I come across in the next week or two.

Cheers!

dogdoctor
01-13-08, 01:10 AM
^^^thanks for the update, and the new router to add to the list.

bobsolo
01-15-08, 09:42 PM
Can some one do me a favor and check your download speed on their PS3 vs PC. Using the web browser on each, go to www.speakeasy.net/speedtest and test using the closest location.

I typically get 26000 kbps down/4500 kpbs up on my PC (hard wired to router), but am only getting 13000 kbps down/13! kbps up on my PS3 (wireless). Being wireless shouldn't be limiting it by half, should it?

Thanks.

MarcoAD
01-15-08, 09:51 PM
Picked up a 40gb PS3 after the HD-DVD announcement and it connected instantly with my Buffalo Wireless-N Nfiniti Router and has run flawlessly so far.

tingham
01-15-08, 10:34 PM
Being wireless shouldn't be limiting it by half, should it?

Thanks.

Yes...unfortunately wireless will cut your bandwidth. By half..maybe? What wireless protocol are you using btw.. "b"..or "g"? My wireless connection speeds are way below my wired connections..and it pisses me off. Also, what channel are you using on your router..most say to use channels..3, 6,or 11..that may help also with bandwidth.

bobsolo
01-16-08, 10:19 AM
Yes...unfortunately wireless will cut your bandwidth. By half..maybe? What wireless protocol are you using btw.. "b"..or "g"? My wireless connection speeds are way below my wired connections..and it pisses me off. Also, what channel are you using on your router..most say to use channels..3, 6,or 11..that may help also with bandwidth.

I played around with the router setting (WRT54G w/ WRT54GL 4.30.11 firmware) and using MIXED seemed best. Believe it or not, when I set the router to "G only", my wired speed dropped slightly! I'm using channel 6. I tried 11, but it dropped my wireless speed significantly. I'm going to run a cable from the router to the PS3 (through the dining room and across the living room) to test a wired vs wireless connection speed on the PS3. I'll post the results.

Budysr
01-16-08, 11:19 AM
Going to hard wired more than doubled my download speed vs. wireless. It probably depends on what router you have more than anything. This assuming your signal is good.

tdc01
01-16-08, 12:45 PM
Can someone help me or point me in the right direction? Here is my problem.

My DSL Westell 2200 is Bridge to my Linksys Router WRT54G and my PS3 is connection to my Router hard wired. I have WIN XP and run it wireless and have MS Onelive Care for Firewall & Spyware. But for some reason I can't get WM 11 on my PC to talk to the PS3.

I also try Tveristy and it don't work neither.

dogdoctor
01-16-08, 02:58 PM
Can someone help me or point me in the right direction? Here is my problem.

My DSL Westell 2200 is Bridge to my Linksys Router WRT54G and my PS3 is connection to my Router hard wired. I have WIN XP and run it wireless and have MS Onelive Care for Firewall & Spyware. But for some reason I can't get WM 11 on my PC to talk to the PS3.

I also try Tveristy and it don't work neither.If i recall, and don't quote me on this, the PC's firewall is likely the issue. I believe I couldn't get mine to work either until I turned off the XP firewall security. I believe I was also told that if you have your routers and bridges security set up properly, that they can act as the firewall, removing the need for the firewall on the PC as long as you run the interent into the router first, before the PC.

I did a search - you should too. And these seemed like winners to read
Windows Media Player 11 Issue Resolved (http://www.avsforum.com/avs-vb/showthread.php?t=865444)
PS3 is now a Wi-Fi Media Center. Check it out... (http://www.avsforum.com/avs-vb/showthread.php?t=851789)

Daishogun
01-16-08, 08:33 PM
Hey guys, I've got a D-Link 524 and i'm having so many problems with it !! First off, i tried putting my Ps3 just like 10 meteres away and I only got a 80% signal and the thing is slow, but my good tv is one floor down and on the other side of the house, i get a 35- 40 signal but it is really really slow, my settings are
UPnP: OFF
SSID Broadcast: OFF
WPA-PSK (TKIP)
And no port fowarding, DMZ etc.
Anyone know how i could optimize these settings to get it to work better or could anyone reccomend me a good long-distance router....thinking of getting this one http://www.netgear.com.au/Products/RoutersandGateways/RangeMaxWirelessRoutersandGateways/WPN824.aspx or maybe this one http://www.netgear.com.au/Products/RoutersandGateways/RangeMaxNEXTWirelessRoutersandGateways/WNR834B.aspx what do you guys think ??

D96
01-17-08, 09:56 AM
I use a D Link WBR 1310 g router. Works just fine.

8IronBob
01-17-08, 11:30 AM
Can't complain about my Belkin 802.11b/g router, definitely worth every penny, imho.

bobsolo
01-17-08, 06:45 PM
Well I ran a 20' CAT5 direct from my router to the PS3 and as predicted doubled my speed. In fact I got a faster rate than on my PC. Looks like I'll be climbing into our crawlspace ones the weather warms up to make the direct line permanent.

Daishogun
01-17-08, 08:44 PM
concerning my other post... unless i enable ssid broadcast my Ps3 won't pick up the signal, but if i enable it the PS3 repeadtaley logs in and out of PSN can anyone help e please??

Budysr
01-18-08, 11:28 AM
Well I ran a 20' CAT5 direct from my router to the PS3 and as predicted doubled my speed. In fact I got a faster rate than on my PC. Looks like I'll be climbing into our crawlspace ones the weather warms up to make the direct line permanent.

I had the same results. Even slightly faster downtimes than on my PC. Its a pain to do, but once you have gone through the trouble of running a line, its more than worth it!! No more router headaches:D

dogdoctor
01-18-08, 03:57 PM
concerning my other post... unless i enable ssid broadcast my Ps3 won't pick up the signal, but if i enable it the PS3 repeadtaley logs in and out of PSN can anyone help e please??
It won't find the network because its not airing the name. If you know the name of the network (what the PS3 finds when the SSID is broadcast), you should be able to directly type in the network name into the PS3 and you should be able to continue the process like before.