Last night I turned the pj on and got this message "HDCP input - Output disabled". Card has worked flawlessly for a week or so, now this. It works fine with an SDI signal from an SD DVD player through the Lumagen HDP Pro. I'm using the same output and cabling.
I have one of his earlier DVI cards and tried that on Input C. This worked fine so I know its the HDMI card. Any ideas? Faulty decoder?

Moome replied quickly in response to the problem I'm having with the HDMI card. He suggests checking the jumpers and set JP2. Not being electronically minded, does this mean I only use one jumper on the JP2 position (don't have the car in front of me to check but I think I rememeber seeing 3 jumpers near the rear of the card)?

Get a Jumper from an old motherboard or harddrive.

Jut it on JP2 on the Moome card (the jumber connects the pins together).

OK, I took a look at the card yesterday and it appears to have a jumper across JP2. There are 3 pairs of pins in the top left corner of the board next to the copper coil and the jumper bridges the 2 middle pins which I assume are JP2.