I need to purchase some 3T connectors for an Autopatch Half-Y matrix switch.
Can you PLEASE help me out :)

What is a 3T connector? Are you simply referring to what is commonly know as a Phoenix connector? If so you should be able to find them on the Internet by doing a search on that term. Keep in mind that Phoenix connectors come in different sizes and number of conductors they accommodate, but the size used on matrix switchers is pretty universal.

I guess you may be able to label it as such.
Autopatch did say they were NOT proprietary, but I was not able to locate anything looking like it. Do you know of any places I should look?

Is the green connector on the right side of the cable in this pic the type you are looking for? If so, 4 conductor?

http://www.directproaudio.com/product.cfm?directid=58808

Yes, it does. That's what I have too, 3-wire for unbalanced audio.
But...the connector I'm looking for is also keyed. I've attached 2 pics showing the top and bottom.

...bumping an old thread here I know, but I wanted to say that mini-Phoenix connectors are _not_ readily available online.

I suspect someone carries 'em, and will be continuing to search myself, but I can't find 'em anywhere.

I bought an AP off of eBay and it didn't have all 12 of the 5t mini-Phoenix connectors for stereo audio (it's an 8 x 4). I can't find any...

If any kind AMX dealers do frequent this section of AVS from time to time and would like to lend a helping hand, feel free to PM me.

I suppose, as a last resort, I'll phone AMX directly but, as I've posted in another thread, with the bath they wanted me to take on a PS (~$300 vs. the $80 I found one for, new, from an electronics house), I'm loathe to phone in again.

Cheers fellas.

does anyone know were you can obtain the control software for matrix units



thanks