Hey folks,

Pardon me if I'm posting this in the wrong section but I just picked up an Eiki LC-NB1 (3) LCD projector at my local pawn shop for $40 and have some questions. It appears as if the multiple LCDs are not aligned properly as there is some color ghosting, also the image has a pink tinge to it. I assume an LCD needs replacement and some alignment adjustments need to be made. I ordered an identical projector with a faulty power supply from eBay for $12 and want to use it for parts. If anybody has any experience in doing this or are familiar with this specific problem please let me know. I realize this thing is pretty old but back in 1999 it retailed for over $5000; and with 2 bulbs it should last me a while. Not bad for about $52

Jeeze, don't all jump in and help at once... bump

Lcd alignment isn't really user adjustable as most are soldered into position. It could also be an issue with the lens array and a severe problem with either is likely the result from rough handling (pj's been dropped etc.) at somepoint in it's life.

Your best bet/hope will be that the ebay unit with the bad ps has a good optics path and swapping pwr supplies gets you decently operating pj.

Good luck!!!