Ok, the newbie's back and ready to ask yet another question.

This time it's about convergence and how the hell do I do it? :p Pretty much just explain it to me as you would an idiot who knows nothing and how to save it to a memory block since I have alot of things that are gonna be hooked up to this and I don't wanna redo convergence every time I unhook one thing and hook something else up.

Before you converge, you need to get your mechanical set-up done correctly. The projector needs to be properly located and/or mounted. Then you need to center your rasters and mechanically aim the guns. Then you need to adjust sheimflug (rings in your case).

Have a look at Guy Kuo's guide. Read it several times. If any of it doesn't make sense ask specific questions.
http://curtpalme.com/Focus_and_Mechanical_Aim1.shtm

Then go through the Barco 701 install manual:
http://curtpalme.com/docs/BarcoData701_Install.pdf

If you've already done all that then you're ready to converge. Convergence is the easy part.

Perhaps someone more generous than I will walk you through everything step by step, but really it's all been documented on this site and Curt's many times over.

Have fun.

-Mark