Slovak
07-15-07, 11:07 AM
I have a Samsung Slimfit tv, model # TX-S3079WHX, and know that the slimfits have geometry issues. Most of the issues have been able to be adjusted properly, except for one annoying one and I have no idea what setting adjusts it. Tech was here once and said it is the best I can get, but I am not satisfied and he is returning next week to look at it again.
The problem I have is with horizontal lines when the crosshatch pattern is displayed. If you start at the top LEFT side of the screen the lines on the top half all slope down towards the center of the screen gradually the farther right you go on the line, and starting at the bottom LEFT of the screen they do just the opposite, they gradually slope up towards the center the farther right you go on the line. Sort of like this > although that is an extreme example, hope you get the idea. This is very noticable when I do not zoom or stretch an image while watching tv and there are the black bars on top and bottom of the screen. Is this acceptable for a geometry issue or not? I took a tape measure and the top and bottom left corners of the picture measure like 2 inches from screen edges, but top and bottom right corners are like 6 inches from screen edges. I find it hard to believe this is an acceptable geometry problem. TV is only a month old. I have played around in the service menu with the crosshatch displayed, but see no adjustments for this problem. What do I do?
The problem I have is with horizontal lines when the crosshatch pattern is displayed. If you start at the top LEFT side of the screen the lines on the top half all slope down towards the center of the screen gradually the farther right you go on the line, and starting at the bottom LEFT of the screen they do just the opposite, they gradually slope up towards the center the farther right you go on the line. Sort of like this > although that is an extreme example, hope you get the idea. This is very noticable when I do not zoom or stretch an image while watching tv and there are the black bars on top and bottom of the screen. Is this acceptable for a geometry issue or not? I took a tape measure and the top and bottom left corners of the picture measure like 2 inches from screen edges, but top and bottom right corners are like 6 inches from screen edges. I find it hard to believe this is an acceptable geometry problem. TV is only a month old. I have played around in the service menu with the crosshatch displayed, but see no adjustments for this problem. What do I do?