zfzq03
08-06-07, 11:29 AM
I have a Mitsubishi WS-65511 that has stopped responding to remote commands. I have unplugged the set and let it sit, and pushed the system reset button, but it still does not work.
Any suggestions?
Any suggestions?
|
View Full Version : Mitsubishi WS-65511 not responding to remote zfzq03 08-06-07, 11:29 AM I have a Mitsubishi WS-65511 that has stopped responding to remote commands. I have unplugged the set and let it sit, and pushed the system reset button, but it still does not work. Any suggestions? zfzq03 08-10-07, 12:50 PM Anybody out there? mes444 08-10-07, 12:58 PM New batteries, dust or dirt or a smudge on the tv's sensor, try another remote, dead remote, broken sensor circuit inside the tv? northrk 08-10-07, 12:59 PM I had this happen on my 55511, it also messed up the front panel controls. The TV was stuck on one input until repaired. It turned out the front panel circuit board was faulty. I cant tell how much it cost b/c I had an extended warranty. Only one I ever purchased on any thing. Used it several time on the TV. Good Luck lukinva 10-22-07, 11:26 AM Interesting, I am having the same issue with my WS-65511, no control via remote or front panel. Did you ever get this fixed? I called a local repair shop and they said the have been seeing this problem more and more with Mitsubishi's....anyone know what the issues are or how much it costs to fix? Is it a difficult repair? I am fairly technically inclined. Thanks, Scott ryebread 04-22-09, 08:39 AM Anyone ever find a solution to this problem? Mine just started doing the same thing. :( TIA hammerdwn 04-22-09, 09:26 AM Front panel buttons (switches) are the usual suspect. Disconnect the wires going to the front panel, plug Tv in, wait a minute, use remote to turn on. ryebread 04-22-09, 02:17 PM It worked! Thank you so much for such a quick and simple fix. I can live without the front panel controls for now. :D:D hammerdwn 04-22-09, 09:40 PM Nice :) I take donations... just kidding... Riccochet 11-18-09, 12:42 AM Front panel buttons (switches) are the usual suspect. Disconnect the wires going to the front panel, plug Tv in, wait a minute, use remote to turn on. How do I access the front panel switch wires to disconnect? Mine is the Mitsubishi WS 65711 version.... Thanks, Riccochet northrk 11-18-09, 11:58 AM This may help, it's from the service manual WS-65711 Front Cabinet Disassembly 1. Remove the Speaker Grilles and Unit Front by pulling forward. 2. Remove 2 screws (a) to remove the Control Panel. 3. Remove the Board Front by removing 4 screws (b). 4. Remove the 4 screws (c) holding the Screen Assembly. 5. Lift the Screen Assembly up and away from the cabinet. |