View Full Version : Viewsonic PJ766D


r_marcinko
08-08-07, 05:42 PM
Hello,
I'm new and hope I'm not beating any dead horses with my question. I did search and nothing, so...

Anyone know anything about the Viewsonic PJ766d projector? It was given to me by my boss and I am considering setting up a Home Theatre with it. Is it even worthwhile with this projector? I'm sure it's obvious with my questions, but I am a novice with HD, any advice is much appreciated.

r_marcinko
08-09-07, 10:13 AM
No one has one I guess. Let me try a different tact.

Would someone that knows about these things please check the specs and let me know if it's worthwhile with this projector? This stuff is all greek to me.

PROJECTOR Type 0.7" XGA Digital Micromirror Device (DLP™)
Pixel Format 1024x768 XGA (native resolution)
Lens Manual zoom/ manual focus
Zoom Factor 1.2
Keystone Vertical ± 15º
DISPLAY Size 37.5"-240" (diagonally)
Throw Distance 58.8"-314.4"
Throw Ratio 1.62:1
Lamp 200W, 3,000 hours**
Brightness 2,500 ANSI lumens
Contrast Ratio 2000:1
Aspect Ratio 4:3 (native), 16:9
INPUT SIGNAL Video NTSC 4.43, PAL, SECAM, HDTV (480i, 480p, 576i, 720p, 1080i)
Frequency Fh: 31-90kHz; Fv: 50-85Hz
COMPATIBILITY PC Analog: from VGA up to SXGA (scaled)
Mac®+ Analog: up to SXGA (may require a Mac adapter)
CONNECTOR
CONTROLS Basic Standby, menu, input, reset, H/V keystone
RGB Input DB-15 (x1)
OnView® Main menu (brightness, contrast, sharpness, color temp, color saturation, color, tint, gamma, color space, reset), setup menu (H. position, V. position, keystone, aspect ratio, advance feature, reset), advanced feature menu (user color, white peaking, logo display, reset), configuration menu, utility menu, language menu, status menu
RGB Output DB-15 (x1)
DVI Input DVI-I (x1)
Composite Video Input RCA jack (x1)
Component Video Input RCA jack (x3)
S-Video Input Mini-DIN 4-pin (x1)
Audio Input Mini-Jack (x1); RCA (x1)
Audio Output Mini-Jack (x1)
Control RS-232 (mini-din, 3-pin)
POWER Voltage 90240 VAC, 50/60Hz (universal)
Consumption 255W (typ)
OPERATING CONDITIONS Temperature 41-95°F (5-35°C)
Humidity 5-95% (no condensing)
NOISE LEVEL Normal 35 dB (typ)
Whisper mode 33 dB (typ)
PACKAGE CONTENTS Projector, power cord, VGA cable, remote control, lens cap, ViewSonic Wizard CD, Quick Start Guide, S-video cable, DVI to HD-15 cable, soft carry case, ViewSonic Wizard CD, Quick Start Guide
DIMENSIONS
(WXDXH) Physical (mm) 328mm x 88mm x 238mm
Physical (in.) 12.9" x 3.5" x 9.4"
REGULATIONS UL/C-UL, FCC-B, TUV, CB, CCC, NOM
SUGGESTED CONSTRUCTION PLANNING DIMENSIONS W/MOUNT (AT 9 14.9 x 13.5 x 11.4
WEIGHT Net 7.9 lb. (3.6 kg)
Gross 14.3 lb. (6.5 kg)
OTHER IMPORTANT INFORMATION To ensure proper ventilation and cooling of the projector, ViewSonic does not recommend installing the projector in an enclosed cabinet.
WARRANTY Three-year limited warranty on parts and labor, first-year Express Exchange® Service. One-year limited warranty on lamp***

gwlaw99
08-09-07, 01:02 PM
It's a below average projector for home theater, but its **FREE** so how can it be a bad deal? I would try to sell it and get a home theater projector though.