Hello readers,

Let's start of with a little story:

I've received my HDFury Red Edition (port3 Barco cable) just yesterday, eager to try it out with my HTPC (ATi 2400Pro) I Shut down all my machines, switch off all the power, and installed the ( Port3_Cable->HDFury(with 5Volts PSU)->5 Meters DVi Cable->HTPC (ATi 2400Pro_Dvi port) ) entire package.

After I turned everything on, the HDFury got detected right away as my main monitor, great things were happening. But after about 5 minutes into the great things, the image started to shiver REALLY HARD, my mousepointer looked like he was having a seizure as was the rest of the image. So scared as H--- I turned everything off.

After I turned the whole system back on, my image wasn't only seizure-shivery, but it came up as an newspaper on a rainy day, as shown below:

http://www.delta9.nl/beeld2.jpg

I've then turned the whole system off again, reseated all the Barco Graphics 808 cards and turned it back on. The shiver was gone for 15 seconds but quickly came back, the crooked image was still there.

The shivering and crooked image are also internal, when nothing is connected to the BG808 it gives the same problem. I've tried to delete all blocks, but nothing helps. The image stays that crooked even when I H-Phase move it or something simulair. ALL the menu-options of the Barco are working fine b.t.w.!

Info about the BG808:

Runtime: 2175 Hours
Wear Ratings: r 8.5 / b 9 / g 8.5

Can someone help me please, as I have NO idea what has been broken and certainly no idea what to do about it.

(sorry for my bad english)