Does any one here have the Harmony 1000 and a Mits WD-73734?

I am guessing that my TV is not totally supported ATM because my 1000 thinks my TV only has two HDMI and two component inputs when it has 4 HDMI and 3 Component

I cannot seem to figure out how to create an input and learn the IR command + map a button because my TV remote does not have discrete input buttons to the inputs, I have to bring up a menu and select the input.

I have noticed in the devices selection there are inputs called DTV input 5 input video 5 that do not show up as an option when I create an activity not do they show up when I try and customize the buttons on inputs .

Thank You

I believe remotecentral.com has all the dicrete codes you would need for that tv, but if that is your only custom remote you may not have a way of getting them learned into your Harmony. I am not familiar with the Harmony 1000, if it allows you to copy and paste codes you should be golden.

First thing is to try all the Device mode commands and note what they do...ie which input they go to.

Next, select "Adjust Inputs" for the TV device and select "Method 2" (I think...whichever one says something like "A different button for each input").

Edit the list of inputs so it matches exactly what your TV has.

You can then assign the discrete commands to each input as required.

If you are missing some discretes, but you can find the Pronto Hex codes on Remotecentral as suggested by philgethifi above, you can email the codes to tech support and they will add them to the database for you.