hay guys, i am looking at blane's projector... first thing is fungus in the tubes, so i have to crack them open. next i am changing the red c element, have those sitting around now. but

he has a set of lug tubes:

p19lug03rja (looks like a sony lead) (panasonic label)
p19lug43hka (no lead) (panasonic label)
p19lug03bmb (looks like a marquee lead) (panasonic label with barco written on it)


what are the tube numbers i need for a marquee. and if so do i need a neckboard mod to use these current tubes in the projector.

thanks

Stock tube numbers are P19LCP07's.
The LUG's you mentioned are higher performance and you can use them in the Marquee with a minor neck board change, but to really take advantage of the LUG's smaller spot size you should really consider changing the focus yoke to the KD 22-22's if you can find them.
Marquee leads and Barco leads are interchangable as far as how they fit in the splitter.

Terry