|
View Full Version : VP50 Pro - problem with brightness wolla 10-20-07, 03:07 AM I have owned the VP30 and the VP50 prior to the VP50 Pro. With the VP50 Pro the brightness setting has no effect!? No matter how high or low I set it, there's no visible effect? I have the VP50 Pro connected to my Panasonic plasma via RGBhv Any advice? Gard 10-20-07, 10:38 AM What plasma model do you have? When I have had similar problems it's normaly the video levels. check output and input level. (video or PC) wolla 10-20-07, 11:24 AM What plasma model do you have? When I have had similar problems it's normaly the video levels. check output and input level. (video or PC) I'm using an anlogue connection (RGBhv) so output level is hardly relevant. Furthermore, this would not explain why the brightness setting has no effect. Gard 10-20-07, 04:30 PM Probably not, it just does. Have never run a plasma with analog connection. Except when configuring VP's wolla 10-23-07, 02:14 PM Another user on www.avforums.com has reported the same "bug". I will try and contact dvdo. wolla 10-25-07, 05:38 AM Maybe this is part of the problem: my RGBs input (from my tv settop box) is reported as YPbPr (i.e. component). On VP30 and VP50 this has always been reported correctly as RGBs. Can this be why the brightness and contrast setting has no effect? (the settop box is not able to output component, only rgb) wolla 10-27-07, 04:35 AM Come on... Someone else must be using RGBs in ? |