i have the classic silver dvr remote from comcast
it came with out dch-3416 dvr

i also have a 52" xbr2

i have tried the following codes:
0000, 0111, 0080, and other random combinations

i also tried the search but i gave up after a few minutes

i would really appreciate it if someone could give me the code for this tv


thanks in advance,
vinvam

PS: if you could give me the 30 second skip for the 3416 that would be awesome, i found it for the 6416 but it did not work on my box...

Try codes 10000, 10111, and 10080.

thank you so much
it was 10000
when i tried a bunch of random codes i kind of got the inkling that the code was 5 digits long.

thanks a lot edmund!

i'm assuming that when i program the code for my reciever
i should add 1 and then the four digit code?
i'll try that and post back

unfortunately i'm in the same position as before with my onkyo sr-504 reciever...

unfortunately i'm in the same position as before with my onkyo sr-504 reciever...


If there are AUD codes in the comcast remote try codes 30135 & 30842. 30135 should give you the ON command and volume, once you unluck the tv volume.

1. press and hold setup for two blinks
2. enter 9 9 3
3. press VOL DOWN

edmund, you are the bomb!

i didn't quite understand what the last part of your post was about
about the 993 code
which mode am i supposed to be in (aux, tv, or cable) and what does it do
if it sends all volume controls to aux (onkyo reciever) that would be great

edmund, you are the bomb!

i didn't quite understand what the last part of your post was about
about the 993 code
which mode am i supposed to be in (aux, tv, or cable) and what does it do
if it sends all volume controls to aux (onkyo reciever) that would be great

I was assuming you were in AUX device. If you want the onkyo volume in all device:

1. press and hold Setup for two blinks
2. enter 9 9 3
3. press AUX device key