I am fighting with how to arrange my cable mgmt for my new lcd tv that will be wall mounted. I have a low profile wall mount from peerless that I'll be using. should be about 1 inch of space from back of tv to wall.

With the tv on the wall I plan to get the power bridge solution as read about on the forums here and get that installed for a surge protected power solution.

I believe that I will be getting a bulk wire wall plate from av-outlet.com http://www.av-outlet.com/media/2GRWPAL.jpg to run my optical, hdmi x2, component w/ audio, connections inside the wall up and behind the tv.

What I am most unsure of is where to put the cable wall plate at. I had considered two options.
1.) at the lower part of the wall next to the bulk wire plate, then just curve the coax and run the cable line up with the rest of the wires.
2.) install the cable outlet behind the tv itself. (I'd like this but I'm not sure if space will allow) Plus I'd like the setup to work either way for who ever buys the house next since flat panels are here to stay.

Suggestions or comments? I'm on a budget so elaborate solutions need not apply. :)

Thanks