I have a Pioneer elite 94 txh receiver and was wondering what was the best setting for the Samsung 5000 and 94 txh to get the best possible sound.

Been swithcing settings constantly and can't figure out which will be the best.

any suggestions will be greatly appreicated.

From the specs it looks like that receiver can decode everything. Unfortunately, the 5000 can't yet bitstream multichannel TrueHD or DTS-HD MA. So, you're in the same boat as me with my non-decoding receiver. Set the 5000 to whatever setting you like (should make little/no difference for you) and don't select TrueHD audio tracks. Uncompressed PCM tracks are the most desirable at the moment since that is the only form of multichannel lossless audio that the 5000 can currently pass to a receiver. I think my 5000 is just set to PCM, since my receiver only decodes basic dolby digital and DTS.

From the specs it looks like that receiver can decode everything. Unfortunately, the 5000 can't yet bitstream multichannel TrueHD or DTS-HD MA. So, you're in the same boat as me with my non-decoding receiver. Set the 5000 to whatever setting you like (should make little/no difference for you) and don't select TrueHD audio tracks. Uncompressed PCM tracks are the most desirable at the moment since that is the only form of multichannel lossless audio that the 5000 can currently pass to a receiver. I think my 5000 is just set to PCM, since my receiver only decodes basic dolby digital and DTS.

Okiedokie thanks soo much