I can't get the settings right for this tv, flesh tones are off and the picture isn't clear or crisp. Does anyone who has one of these mind posting their settings to help me out? Thanks.

Contrast 85

Brightness 40

Color 60

Tint 0

Sharpness 37

Backlight 17

Black level high

cinime 3.2 mode - off

aspect 16.9

xd - manual

xd contrast - off

xd color - off

xd noise - on

color temp - user (all are set on 0)

mine are in no way professional..i just popped in call of duty 4 on ps3 and played around with it...its through HDMI..

contrast 100
brightness 50
color 55
sharpness 35 (not sure about this one...anyone know how to 'perfectly calibrate 'this setting?)
tint 0
black level high
xd manual
xd contrast off
xd color off
xd noise on
color temp all on 0

contrast 95
brightness 50
color 43
sharpness 37
tint 0
black level high
xd manual
xd contrast off
xd color off
xd noise on
color temp all on 0

I have the same television and I was wondering, how do you access the advanced menu to change the black level and cinema mode. The "advanced" option is on the list but its highlighted in grey and it seems I cant acess it. Any help would be appreciated, thanks:)

Use the HDMI input to get the advanced setting

I turn off XD Noise for the digital channels, but leave XD Noise on for the analog channels. To me, XD Noise softens the picture way too much on the digital and HD channels, but seems to help clear up the analog channels.

i keep finding better and better settings:
contrast: 100
brightness: 42
color: 43
sharpness: 30 (i pulled this number out of my a**)
tint: 0
xd contrast & color = off
xd noise = on
color temperature = cool (better whites)

This is the best I've been able to get so far using DVE via HDMI

Contrast: 78
Brightness: 39
Colour: 51
Sharpness: 0-45 (I'm still not too sure about this one)
Tint: 0
XD Contrast & Colour: Off
XD Noise: Off (for HD material), On (for SD material)
Blck Level: Low
3:2 Pulldown: On (only available for 480i material)
Colour Temperature: Warm (most realistic gray scale)

Just picked this up. What did you guys do to calibrate for standard cable?