New at Home Theater

OKC_Guy · 01-20-07, 12:55 PM

I'm fairly inexperienced hooking up a/v components. I have a Panasonic HT740 HTIB and an Optoma projector. I want to get my cable into the mix. I'm going to go to HD cable, but at present I am on Cox Digital Cable using a Scientific Atlanta Explorer 2100 converter.

My first question has to do with getting the sound from the converter to the HTIB. I've got dual RCA plugs connecting the cable converter audio out (red/white) to the Pansonic auxiliary audio in. The operating manual for the Panasonic indicates that to get sound from the cable, I need to run the RF signal through a TV and output the sound from the TV. Is this my problem? Unfortunately, the only TV I can get to the cable converter has no audio output.

OKC_Guy · 01-20-07, 01:36 PM

While I'm asking, what's involved in getting a converted cable signal to multiple drops?

miniz · 01-20-07, 01:45 PM

When you get HD cable, you will have additonal digital audio outputs on the back of your new box. You may use these to connect direct to your HT system's receiver.

acteon · 01-20-07, 03:34 PM

"The operating manual for the Panasonic indicates that to get sound from the cable, I need to run the RF signal through a TV and output the sound from the TV."

If you didn't have a cable box and ran direct, then yes. In your case, run the red and white audio from your cable box to the receiver.

01-20-07, 12:55 PM	#1 \| Link	<a href='http://rev.avsforum.com/phpAdsNew/adclick.php?n=a4ac4393' target='_blank'><img src='http://rev.avsforum.com/phpAdsNew/adview.php?what=zone:30&n=a4ac4393' border='0' alt=''></a>
OKC_Guy Member Join Date: Jan 2007 Posts: 16	New at Home Theater I'm fairly inexperienced hooking up a/v components. I have a Panasonic HT740 HTIB and an Optoma projector. I want to get my cable into the mix. I'm going to go to HD cable, but at present I am on Cox Digital Cable using a Scientific Atlanta Explorer 2100 converter. My first question has to do with getting the sound from the converter to the HTIB. I've got dual RCA plugs connecting the cable converter audio out (red/white) to the Pansonic auxiliary audio in. The operating manual for the Panasonic indicates that to get sound from the cable, I need to run the RF signal through a TV and output the sound from the TV. Is this my problem? Unfortunately, the only TV I can get to the cable converter has no audio output.

01-20-07, 01:45 PM	#3 \| Link
miniz OFFICAL HOME OF HDTV Join Date: Mar 2004 Location: Small Town X, HDTV Land Posts: 2,221	When you get HD cable, you will have additonal digital audio outputs on the back of your new box. You may use these to connect direct to your HT system's receiver. __________________ "PLEASE HELP STOP HDTV ABUSE! FEED YOUR HDTV AN HD SIGNAL!"

01-20-07, 01:36 PM	#2 \| Link
OKC_Guy Member Join Date: Jan 2007 Posts: 16	While I'm asking, what's involved in getting a converted cable signal to multiple drops?

01-20-07, 03:34 PM	#4 \| Link
acteon Member Join Date: Oct 2006 Posts: 35	"The operating manual for the Panasonic indicates that to get sound from the cable, I need to run the RF signal through a TV and output the sound from the TV." If you didn't have a cable box and ran direct, then yes. In your case, run the red and white audio from your cable box to the receiver.