LCD horizontal lines?

jestes22 · 09-26-07, 09:39 AM

I bought a 46" Samsung 1080p monday. This morning I've noticed that there is a horizontal black line that has appeared at the bottom of the screen. It's visible roughly 3/4 of the way across the screen. It runs through the Fox listing on the guide in the pic.

Any ideas as to what caused this? Everything that goes to the tv runs through one of Belkin's top surge protectors.

nicknomo · 09-26-07, 10:00 AM

Is it present in other channels? While I doubt it is a problem with the cable provider, it is possible.

Otherwise, I'd say that this is a pretty clear defect..

jestes22 · 09-26-07, 11:13 AM

It's visible on all dish channels, including my dvd movies.

nicknomo · 09-26-07, 02:04 PM

I'd put my money that the set is defective. The final test would be to see if it happens from other sources and other inputs... but I'm betting that you'll still have the problem. If you do not have the problem with this testing, you have just discovered what it is not - the very expensive and irrepairable panel on your tv.

If its your tv, return it or submit for warranty service..

jestes22 · 09-26-07, 04:40 PM

I hooked up my PS2 to it earlier, same result. I've already submitted a warranty repair request on samsung's website for in-home service.

nicknomo · 09-26-07, 04:47 PM

I know of someone who had a problem with their samsung set.. The problem was rectified pretty quickly... so you should be ok.. Good luck!

DBLASS · 09-28-07, 01:04 PM

If the internally generated screen (like the OSD menu) shows the problem, then it is likely the set. The problem looks like inducted noise from the cables. This is why the video board generated screens should not show it (since it is not coming in from the outside window).

09-26-07, 09:39 AM	#1 \| Link	<a href='http://rev.avsforum.com/phpAdsNew/adclick.php?n=a4ac4393' target='_blank'><img src='http://rev.avsforum.com/phpAdsNew/adview.php?what=zone:30&n=a4ac4393' border='0' alt=''></a>
jestes22 New Member Join Date: Jun 2007 Posts: 13	LCD horizontal lines? I bought a 46" Samsung 1080p monday. This morning I've noticed that there is a horizontal black line that has appeared at the bottom of the screen. It's visible roughly 3/4 of the way across the screen. It runs through the Fox listing on the guide in the pic. Any ideas as to what caused this? Everything that goes to the tv runs through one of Belkin's top surge protectors.

09-26-07, 04:40 PM	#5 \| Link	<a href='http://rev.avsforum.com/phpAdsNew/adclick.php?n=a591f81a' target='_blank'><img src='http://rev.avsforum.com/phpAdsNew/adview.php?what=zone:36&n=a591f81a' border='0' alt=''></a>
jestes22 New Member Join Date: Jun 2007 Posts: 13	I hooked up my PS2 to it earlier, same result. I've already submitted a warranty repair request on samsung's website for in-home service.

09-26-07, 10:00 AM	#2 \| Link
nicknomo Senior Member Join Date: Oct 2005 Posts: 416	Is it present in other channels? While I doubt it is a problem with the cable provider, it is possible. Otherwise, I'd say that this is a pretty clear defect..

09-26-07, 11:13 AM	#3 \| Link
jestes22 New Member Join Date: Jun 2007 Posts: 13	It's visible on all dish channels, including my dvd movies.

09-26-07, 02:04 PM	#4 \| Link
nicknomo Senior Member Join Date: Oct 2005 Posts: 416	I'd put my money that the set is defective. The final test would be to see if it happens from other sources and other inputs... but I'm betting that you'll still have the problem. If you do not have the problem with this testing, you have just discovered what it is not - the very expensive and irrepairable panel on your tv. If its your tv, return it or submit for warranty service..

09-26-07, 04:47 PM	#6 \| Link
nicknomo Senior Member Join Date: Oct 2005 Posts: 416	I know of someone who had a problem with their samsung set.. The problem was rectified pretty quickly... so you should be ok.. Good luck!

09-28-07, 01:04 PM	#7 \| Link
DBLASS Advanced Member Join Date: Dec 2006 Posts: 665	If the internally generated screen (like the OSD menu) shows the problem, then it is likely the set. The problem looks like inducted noise from the cables. This is why the video board generated screens should not show it (since it is not coming in from the outside window).