trying to narrow down source of issue SA8300HD DVR - AVS Forum
Forum Jump: 
 
Thread Tools
post #1 of 1 Old 09-11-2007, 04:41 PM - Thread Starter
AVS Special Member
 
Suzook's Avatar
 
Join Date: Jun 2001
Posts: 5,483
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 27
ok bare with me but I have been to other forums with no luck so here goes.

I am in Orlando FL and have Brighthouse Networks service. I have had the HD DVR for 2 years months with no issues. I have always run the box to my receiver and was able to pass all resolutions. I have a Panasonic PF659UK commercial plasma which has a DVI blade. About 3 weeks ago, I purchase a new receiver, the Onkyo NR-905 which is an amazing receiver. The problem is that when I connect the box to the 905 and run it to the tv, the box will only allow me to select 720p and 480p. If I unplug the hdmi/dvi cord going to the tv and plug it directly to the box, the 1080i light comes right on. Whats even more strange, is that when I go into the OSD for the receiver, the 1080i lights up on the dvr. Second I exit out, right back to 720p it goes. I dont know if the receiver is not reading the edid right or what but something is screwy. I want my Discovery in 1080i back !!!!!!!!!

any ideas, any suggestions !!!!!!!
Suzook is offline  
Reply Digital Recorders (PVRs) General

User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off