Magnavox 557, 537, 535, 533, 515, 513, 2160A, 2160, 2080 & Philips 3576, 3575 - Page 231 - AVS Forum
Forum Jump: 
Reply
 
Thread Tools
post #6901 of 25917 Old 10-11-2009, 09:03 AM
AVS Special Member
 
auskck's Avatar
 
Join Date: Aug 2008
Location: Diamondhead, MS
Posts: 1,825
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Well here's the deal, 2 weeks in intensive care. Problem is teminal lung cancer, approx 6 months.
I have 3 machines and parts to convert to full blown swappable 500gb drives. You tell me the configuration and I can due it.
lets talk asap. 2180, 3575 and 3576. I have data store cabinet and draws, I have 2 toasters. Currently 3575 is full blown with 4 (500gb) drives.
All equipment in like new or excellent condition.
auskck is offline  
Sponsored Links
Advertisement
 
post #6902 of 25917 Old 10-11-2009, 09:03 AM - Thread Starter
AVS Club Gold
 
wajo's Avatar
 
Join Date: Dec 2005
Posts: 14,054
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 38 Post(s)
Liked: 134
Quote:
Originally Posted by lzsj123 View Post

Thans Wajo and jjeff

I will try a recan.

108.1 on the timer woks great - it pops to 4.1 the local NBC HD channe. I have found them all above 100 except the local CBS HD. Using the channel up, it pops to it after I pass 9.37, but I cannot see what the real channel is. Logic would say it is a subchannel of 108 but I cannot find it manually (yet). The search goes on.

I think you've got a great opportunity to test something for others in same situation.

I'd try Deleting ch# 4 in the digital tuner with the Manual Preset menu. This will test what happens if 108 has no channel in memory... my experience says it will still go to 4.1 cuz CH+/- memory is just for "convenience" anyway.

I'm wondering, tho, if something changes cuz ch #4 is not in the CH+/_ memory?

You understand exactly what's happening in your channel remapping so you might be able to test some other things like that, i.e., any changes from certain channels NOT being in CH+/- memory, esp. AFTER AN AUTO-CHANNEL PRESET?

If something doesn't work, you can just ADD a channel back and, when done testing, do a final auto-scan to clean things up?


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
wajo is offline  
post #6903 of 25917 Old 10-11-2009, 09:14 AM
AVS Special Member
 
jjeff's Avatar
 
Join Date: Nov 2007
Location: Minneapolis MN
Posts: 9,831
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 132 Post(s)
Liked: 90
Quote:
Originally Posted by jjeff View Post

Auskck, that's a name I haven't seen in a while. His last post was over a month ago(8/24) I hope he's doing well .....

Sorry to hear, I guess my hoping didn't do any good
Your pioneering work in this thread will live on and is much appreciated by all.
jjeff is online now  
post #6904 of 25917 Old 10-11-2009, 09:18 AM
AVS Special Member
 
auskck's Avatar
 
Join Date: Aug 2008
Location: Diamondhead, MS
Posts: 1,825
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by jjeff View Post

Sorry to hear, I guess my hoping didn't do any good
Your pioneering work in this thread will live on and is much appreciated by all.

Thanks for the support, it was fun trying to piece it all together and getting it working.
auskck is offline  
post #6905 of 25917 Old 10-11-2009, 11:12 AM
AVS Special Member
 
artwire's Avatar
 
Join Date: Feb 2009
Posts: 1,208
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by lzsj123 View Post

HELP - GOING CRAZY trying to find missing channel. I have every digital channel turned on using all or nothing procedure and cannot find WUSA HD (Channel 9.1 in Comcast DC area). When I use channel up it goes from 9.32 (SDT) to 9.1 after going to 10.. first. The frequency indicates it shoud be somewhere in 108 subchannel land. Manually trying them all I cannot find. This is a problem becuase when using the timer for 9.1 I record just a blue screen. I notice when I go to 108.1 it immediately changes to 4.1, 108.2 goes to 4.2 and 108.3 goes to 4.3. Every one after that goes to 4.1. CBS HD is the only one lost to my timer.


lzsj123, I'm picking up HD version of WUSA on 117.3 -- in fact, there's a whole set of stations lurking in that hidden area -- NBC is 117.1, ABC is 118.1 PBS starts around 118.4 and there are four or five stations. I"m getting channel 9 on channel 9 as well (but I don't think it's HD), and it comes in on 29 using the analog tuner in the 2160, as well. I suggest making sure you have 115, 116, 117, 118 locked in via manual -- you'll get Travel HD that way, too. I'm not at my set now, so can't give you the exact number, but it's high up in the 115 range.

Auskck, I'll second jjeff's comments - I'm new, but you've been so very helpful and I'm sorry to hear the grim news. All our best wishes...
artwire is offline  
post #6906 of 25917 Old 10-11-2009, 11:41 AM
Newbie
 
lzsj123's Avatar
 
Join Date: Oct 2009
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Artwire, are you in Montgomery County, Md?

Did as suggested and DELETED 4 (also 5,7, 9 and 20). Going to 108.1 auto switches to 4.1, so your theory was correct. Still canot find 9.1, I trued every XX.1 (why I am wondering if Artwire and I on the xame COMCAST system). Virtual station 9.1 is mapped within the DVR from some real station greater than XX.2, but I still cannot find it. Putting my COMCAST box in diag mode I cab see that it is set at 699,000 MHZ.
lzsj123 is offline  
post #6907 of 25917 Old 10-11-2009, 11:46 AM - Thread Starter
AVS Club Gold
 
wajo's Avatar
 
Join Date: Dec 2005
Posts: 14,054
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 38 Post(s)
Liked: 134
Quote:
Originally Posted by lzsj123 View Post

Did as suggested and DELETED 4 (also 5,7, 9 and 20). Going to 108.1 auto switches to 4.1, so your theory was correct. Still canot find 9.1, I trued every XX.1 (why I am wondering if Artwire and I on the xame COMCAST system). Virtual station 9.1 is mapped within the DVR from some real station greater than XX.2, but I still cannot find it. Putting my COMCAST box in diag mode I cab see that it is set at 699,000 MHZ.

With the Comcast DTA, you've got another tool to help you locate Comcast channels... the Sydyen Procedure.

Following Sydyen's instructions, that 699 000 is at Ch. 108. The far-right number in the DTA list will give you the subchannel number, as described in the procedure.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
wajo is offline  
post #6908 of 25917 Old 10-11-2009, 12:09 PM
AVS Special Member
 
artwire's Avatar
 
Join Date: Feb 2009
Posts: 1,208
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by lzsj123 View Post

Artwire, are you in Montgomery County, Md?

Did as suggested and DELETED 4 (also 5,7, 9 and 20). Going to 108.1 auto switches to 4.1, so your theory was correct. Still canot find 9.1, I trued every XX.1 (why I am wondering if Artwire and I on the xame COMCAST system). Virtual station 9.1 is mapped within the DVR from some real station greater than XX.2, but I still cannot find it. Putting my COMCAST box in diag mode I cab see that it is set at 699,000 MHZ.


I thought you said you were in DC, but maybe you said DC area sorry.... maybe Stump can help. The numbers I gave you are the OVER THE COAX comcast feed (not via the STB box) numbers. WUSA 9 HD on the Motorola STB comes in at 212, and WUSA OTA comes in at 9.1 on my CECB.
artwire is offline  
post #6909 of 25917 Old 10-11-2009, 12:28 PM
AVS Special Member
 
artwire's Avatar
 
Join Date: Feb 2009
Posts: 1,208
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
here is stump's posted line up for Montgomery County QAM .... I don't get half of these in DC - many are scrambled.


Comcast Montgomery County, MD QAM Channel Listing
as of 09/25/09

QAM # Network/Callsign/Description

4.11 NBC/WRC
5.12 FOX/WTTG
7.31 ABC/WJLA
8.1 COMCAST PREVIEWS
9.32 CBS/WUSA
14.17 UNI/WFDC (SPANISH)
20.26 MNTV/WDCA (Old UPN)
22.34 PBS/WMPT-MD
26.18 PBS/WETA-DC
32.14 PBS/WHUT-Howard University
37.1 CCM/COUNTY TRAFFIC CAMS
37.2 MONTGOMER COUNTRY GOVT.
37.3 ROCKVILLE CHANNEL
37.4 LOCAL ACCESS
37.5 CSPAN-3
37.6 LOCAL ACCESS
37.7 LOCAL ACCESS
37.8 LOCAL ACCESS
37.9 ITV33/MONTGOMERY COUNTY PUBLIC SCHOOLS
37.10 IVT34/MCPS
37.11 LOCAL ACCESS
37.12 TV GUIDE
37.13 UMTV/UNIVERITY OF MD
37.14 LOCAL ACCESS
38.1 UNVERSAL HD/SPORTS AND MOVIES
47.38 UNI/WMDO/SPANISH
48.6 CSPAN-2
50.16 CW/WDCW (Old WB)
58.1 ION/WPXW-HD (Old PAX)
66 ION/WPXW-ANALOG
80.1 TCM/TURNER CLASSIC MOVIES
81.1 NFL/FOOTBALL
81.2 GALAVISION (SPANISH)
81.3 ESPN
81.4 TNT
81.5 UNK (SPANISH)
81.6 TRU-TV (Old COURT TV)
82.1 VERSUS
82.2 COMCAST INFO
82.3 COMCAST SPORTSNET
83.11 ON DEMAND/PREVIEWS
84.9 CSPAN3-HD
92.1 E!
92.3 HALLMARK CHANNEL
92.5 SPIKE
92.7 STYLE
92.10 TVLAND
93.1 TBN
93.3 LIFETIME
93.4 LIFETIME MOVIE CHANNEL
93.5 MASN/SPORTS
93.6 HISTORY
93.7 EWTN/CHRISTIAN
93.8 WGN-HD/CHICAGO SUPERSTATION
93.9 A&E
93.10 FOOD NETWORK
93.11 HGTV
100.2 ABC FAMILY
100.4 CNBC
100.5 MSNBC
100.6 BRAVO
100.8 FOX NEWS CHANNEL
100.9 FX
101.1 CSPAN
101.2 CSPAN-2
101.3 ANIMAL PLANET
101.4 TRAVEL CHANNEL
101.5 TV ONE
101.6 DISCOVERY HEALTH
101.7 CNN
101.8 GOLF CHANNEL
101.9 HSN
101.10 QVC
101.12 CNN HEADLINE NEWS
102.1 BET
102.2 TOON
102.3 COMEDY CENTRAL
102.4 MTV
102.5 DISNEY
102.6 NICK
102.7 SYFY
102.8 AMC
102.9 DISCOVERY
102.10 TLC
102.11 VH1
102.12 USA NETWORK
* This machine previously tuned in additional channels 107.1-48 (Music Channels) and 111.1 (TNT-HD) but they've disappeared now.
artwire is offline  
post #6910 of 25917 Old 10-11-2009, 12:55 PM
Newbie
 
lzsj123's Avatar
 
Join Date: Oct 2009
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Thanks Artwire. I wish he had continued up into the 108 area. He got the local SD channels but I am struggling to find the local HD channels. I have a COMCAST DVR and was able to force it into the diag channel screen, but it gives the frequency only and not the sub channel like the SDT box does. And my SDT box does not tune any GD channels so I cannot look them up uisng the previous directions. I am stuck unless somebody with COMCAST Montgovery County MD nas the real QAM channel number for WUSA HD. It should be in the 108 channel but none of the subchalles seem to hit is. I notice that using the remote's up amd down SKIPS real channelsa that are mapped to a virtual chabbe. Too bad the DCR will not sisplay a channel map like the COMCAST boxes to see real versus virtual.
lzsj123 is offline  
post #6911 of 25917 Old 10-11-2009, 01:41 PM
AVS Special Member
 
artwire's Avatar
 
Join Date: Feb 2009
Posts: 1,208
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by lzsj123 View Post

Thanks Artwire. I wish he had continued up into the 108 area. He got the local SD channels but I am struggling to find the local HD channels. I have a COMCAST DVR and was able to force it into the diag channel screen, but it gives the frequency only and not the sub channel like the SDT box does. And my SDT box does not tune any GD channels so I cannot look them up uisng the previous directions. I am stuck unless somebody with COMCAST Montgovery County MD nas the real QAM channel number for WUSA HD. It should be in the 108 channel but none of the subchalles seem to hit is. I notice that using the remote's up amd down SKIPS real channelsa that are mapped to a virtual chabbe. Too bad the DCR will not sisplay a channel map like the COMCAST boxes to see real versus virtual.

WHy not give WUSA a call - I'll bet they hear about this problem all the time. Or, you could call comcast. No, I'm not joking... normally, that would be a 'last resort' solution, but since you have their DVR AND they are supposed to provide the locals in the clear .... this might be something you have the right to bitchabout.

I'm confused though -- you are trying to tune this on your Comcast dvr or on a mag/phillips recorder via QAM? Do you have any other QAM capable tuners in the house that might pick it up (so you can ID the number)?

Also, why not post here in the regional HD thread. Maybe someone will know the answer...

http://www.avsforum.com/avs-vb/showt...93124&page=362

final suggestion - -have you tried using an OTA antenna and/or a CECB?
artwire is offline  
post #6912 of 25917 Old 10-11-2009, 01:45 PM
Senior Member
 
bodhi78's Avatar
 
Join Date: Jun 2009
Location: US
Posts: 480
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 11
Quote:
Originally Posted by auskck View Post

Well here's the deal, 2 weeks in intensive care. Problem is teminal lung cancer, approx 6 months.
I have 3 machines and parts to convert to full blown swappable 500gb drives. You tell me the configuration and I can due it.
lets talk asap. 2180, 3575 and 3576. I have data store cabinet and draws, I have 2 toasters. Currently 3575 is full blown with 4 (500gb) drives.
All equipment in like new or excellent condition.

auskck,

Sorry to hear the bad news. I was just now looking at your page for HDD replacement instruction. Thanks for all the valuable contributions. Please keep your spirit up. Look for alternative medicine... you'll never know.

bodhi
bodhi78 is offline  
post #6913 of 25917 Old 10-11-2009, 01:57 PM - Thread Starter
AVS Club Gold
 
wajo's Avatar
 
Join Date: Dec 2005
Posts: 14,054
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 38 Post(s)
Liked: 134
Quote:
Originally Posted by lzsj123 View Post

Thanks Artwire. I wish he had continued up into the 108 area. He got the local SD channels but I am struggling to find the local HD channels. I have a COMCAST DVR and was able to force it into the diag channel screen, but it gives the frequency only and not the sub channel like the SDT box does. And my SDT box does not tune any GD channels so I cannot look them up uisng the previous directions. I am stuck unless somebody with COMCAST Montgovery County MD nas the real QAM channel number for WUSA HD. It should be in the 108 channel but none of the subchalles seem to hit is. I notice that using the remote's up amd down SKIPS real channelsa that are mapped to a virtual chabbe. Too bad the DCR will not sisplay a channel map like the COMCAST boxes to see real versus virtual.

The link Aretwire gave might help. I used Search and found lots of posts mentioning WUSA, and problems tuning even with a CM7000.

ANOTHER THING TO TRY JUST CUZ IT'S EASY...

Check for too strong a signal by doing the hang-by-a-thread test described here.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
wajo is offline  
post #6914 of 25917 Old 10-11-2009, 02:49 PM
Newbie
 
lzsj123's Avatar
 
Join Date: Oct 2009
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Artwire and Wajo: Thanks for trying to help.

"I'm confused though -- you are trying to tune this on your Comcast dvr or on a mag/phillips recorder via QAM? Do you have any other QAM capable tuners in the house that might pick it up (so you can ID the number)? "

I am trying to do this on my Phillips 3575H. My Sony TV wuth QAM tuner is not much help. It picks up all the channels on the traditional numbers (9.1 is WUSA-HD). The COMCAST DVR box has a great dignostic menu (tune to channel, turn off and press OK). It has at least 10 or so choices on the menu, and two of them give the frequency of the current channel, but no subchannel info.

I will try the link, and then call the station and / or COMCAST.

Appreciate the hand holding.
lzsj123 is offline  
post #6915 of 25917 Old 10-11-2009, 03:04 PM
AVS Special Member
 
jjeff's Avatar
 
Join Date: Nov 2007
Location: Minneapolis MN
Posts: 9,831
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 132 Post(s)
Liked: 90
Depending on your Sony model it may also give the frequency and physical channel. On my W4100 LCD I push MENU, then PRODUCT SUPPORT then select SIGNAL DIAGNOSTICS. Not sure what it shows for cable since I'm OTA only.
jjeff is online now  
post #6916 of 25917 Old 10-11-2009, 03:15 PM
AVS Special Member
 
artwire's Avatar
 
Join Date: Feb 2009
Posts: 1,208
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by lzsj123 View Post

Artwire and Wajo: Thanks for trying to help.

"I'm confused though -- you are trying to tune this on your Comcast dvr or on a mag/phillips recorder via QAM? Do you have any other QAM capable tuners in the house that might pick it up (so you can ID the number)? "

I am trying to do this on my Phillips 3575H. My Sony TV wuth QAM tuner is not much help. It picks up all the channels on the traditional numbers (9.1 is WUSA-HD). The COMCAST DVR box has a great dignostic menu (tune to channel, turn off and press OK). It has at least 10 or so choices on the menu, and two of them give the frequency of the current channel, but no subchannel info.

I will try the link, and then call the station and / or COMCAST.

Appreciate the hand holding.

so you can get analog 9 and SD digital 9 but not HD nine?

One question - you may have covered it earlier -- but ??? Is your cable going to the comcast DVR first , then to the Phillips where you are trying to tune the channel? If so, you might want to split the signal and send the coax directly in to Phillips. *

. Another option if you're really stuck, antenna in will get you high def on 9-1 ota . You cant record in high def anyway, so it's kind of a moot point.

Can you pick up 9 "analog' on the cable feed ?
artwire is offline  
post #6917 of 25917 Old 10-11-2009, 03:27 PM
AVS Special Member
 
artwire's Avatar
 
Join Date: Feb 2009
Posts: 1,208
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Comcast used to send WUSA over Montgomery county cable at WUSA DT (CBS) 103.1 -- doubt it's still there, but wouldn't hurt to try
artwire is offline  
post #6918 of 25917 Old 10-11-2009, 04:03 PM
Newbie
 
lzsj123's Avatar
 
Join Date: Oct 2009
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
I have the cable split and going independent. I do get analog nine as well as digital SD 90n 9.32. With 9 added and a then scanned, I can also get HD 9. Using the remote channel up, it pops in after 9.32. But... if I try to use the timer to record on 9.1, it records blue. That is when I realized it was a virtual channel and not a real one. That led to the discovery that 4.1 virtual is 108.1 real, and so on. Just cant find the real channel for 9.1 (yet). I will try the Sony TV tip next. THANKS.
lzsj123 is offline  
post #6919 of 25917 Old 10-11-2009, 04:14 PM
Senior Member
 
bodhi78's Avatar
 
Join Date: Jun 2009
Location: US
Posts: 480
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 11
I've successfully upgraded my 2160 to 500GB HDD today It took about 45 minutes. The longest time was spent on waiting 10 minutes after unplugging power, and then going slowly opening the case, unplugged the power cable and IDE cable. The rest was easy, just be careful with the screws because they are cheap.

Fired it up, and all settings were saved except the clock and timer programs. Did the SKIP 079. Took only a couple minutes. Powered on again and started recording from buffer to test SP and HQ mode. Everything worked perfectly!

The HDD was bought from Newegg, PATA 500GB Hitachi (Deskstar P7K500 HDP725050GLAT80) for 69.99 free shipping.

On the display, the recording time was showed as followed:

103h HQ
206h SP
258 SPP
310h LP
413h EP
620h SLP

My next project will be to connect the 160GB HDD to my Windows PC and and read video files. Stay tuned! it'll take about a week to receive parts from Amazon.

Thanks auskck, dartman, wajo and others for directions and tips
bodhi78 is offline  
post #6920 of 25917 Old 10-11-2009, 04:23 PM
AVS Special Member
 
auskck's Avatar
 
Join Date: Aug 2008
Location: Diamondhead, MS
Posts: 1,825
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by bodhi78 View Post

I've successfully upgraded my 2160 to 500GB HDD today It took about 45 minutes. The longest time was spent on waiting 10 minutes after unplugging power, and then going slowly opening the case, unplugged the power cable and IDE cable. The rest was easy, just be careful with the screws because they are cheap.

Fired it up, and all settings were saved except the clock and timer programs. Did the SKIP 079. Took only a couple minutes. Powered on again and started recording from buffer to test SP and HQ mode. Everything worked perfectly!

The HDD was bought from Newegg, PATA 500GB Hitachi (Deskstar P7K500 HDP725050GLAT80) for 69.99 free shipping.

On the display, the recording time was showed as followed:

103h HQ
206h SP
258 SPP
310h LP
413h EP
620h SLP

My next project will be to connect the 160GB HDD to my Windows PC and and read video files. Stay tuned! it'll take about a week to receive parts from Amazon.

Thanks auskck, dartman, wajo and others for directions and tips

Congratulations:
You are now the resident expert on HDD upgrades
auskck is offline  
post #6921 of 25917 Old 10-11-2009, 04:37 PM
Senior Member
 
bodhi78's Avatar
 
Join Date: Jun 2009
Location: US
Posts: 480
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 11
Quote:
Originally Posted by auskck View Post

Congratulations:
You are now the resident expert on HDD upgrades

Nah, with all of your experience reports on HDD upgrade, we don't even need resident expert a wealth of information in yours and wajo's pages has made this seemingly difficult task pretty easy.
bodhi78 is offline  
post #6922 of 25917 Old 10-11-2009, 05:36 PM
AVS Special Member
 
artwire's Avatar
 
Join Date: Feb 2009
Posts: 1,208
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by bodhi78 View Post

Nah, with all of your experience reports on HDD upgrade, we don't even need resident expert a wealth of information in yours and wajo's pages has made this seemingly difficult task pretty easy.

Congratulations, little sparrow! Following in the footsteps of the great ones
Now you guys have to figure out how to make it simple enough for mere mortals to do it, too! How cool.... I was hoping one of these days we'd figure out a way to just plug in an external like the western digital media gizmo that Tivo folks can use, but I can see that's probably not going to be so easy to create a 'plug and play' Firewire- (esata in this case) style solution. I guess I'll have to wait til my warranty expires, but I hope you're documenting all this with pictures and baby-steps for the rest of us!

Only plus side to having a small drive is when you make an idiot out of yourself (as I did yesterday) and accidentally delete everything on it, you won't lose as much! Told you -- BABY steps ....
artwire is offline  
post #6923 of 25917 Old 10-11-2009, 05:47 PM - Thread Starter
AVS Club Gold
 
wajo's Avatar
 
Join Date: Dec 2005
Posts: 14,054
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 38 Post(s)
Liked: 134
Quote:
Originally Posted by artwire View Post

I was hoping one of these days we'd figure out a way to just plug in an external like the western digital media gizmo that Tivo folks can use, but I can see that's probably not going to be so easy to create a 'plug and play' Firewire- (esata in this case) style solution. I guess I'll have to wait til my warranty expires, but I hope you're documenting all this with pictures and baby-steps for the rest of us!

Auskck did this long ago and operates 4 ESATA's on same machine, and moves them to another machine when he wants... something TIVO and Moxi folks can't do. You also retain all recorded titles when switching drives (no reformatting reeqd), taking drives to and playing titles on another machine, etc. while preserving timer rec programs.

See #5 here.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
wajo is offline  
post #6924 of 25917 Old 10-12-2009, 07:56 AM
AVS Special Member
 
artwire's Avatar
 
Join Date: Feb 2009
Posts: 1,208
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
I more or less get how the internal is tweaked by adding the adapter and cables, then the outgoing 'plug' becomes the connector to the external drive enclosure with multiple swappable drives. I could probably handle that - though the cheap screws are always a P I T A , but my real question is "how do you put humpty dumpty together again?" Does the extending cable that connects to the external peripherals just hang out the back like a tail ? One photo of the test unit is still open, and another photn shows the red esata cable extended (to the toaster) where it's easily swappable... Dumb question -- Do you ever put the 'lid' back on, or does the cover have to stay off to accommodate the now external cable?
artwire is offline  
post #6925 of 25917 Old 10-12-2009, 08:14 AM - Thread Starter
AVS Club Gold
 
wajo's Avatar
 
Join Date: Dec 2005
Posts: 14,054
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 38 Post(s)
Liked: 134
Not sure if Auskck will see this, but that pic of his showing the front view of his 3575 with enclosure and toaster on top, is buttoned-up and in an operational mode with one of his 4 HDDs (or maybe he has 5 now).


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
wajo is offline  
post #6926 of 25917 Old 10-12-2009, 08:26 AM
AVS Special Member
 
artwire's Avatar
 
Join Date: Feb 2009
Posts: 1,208
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by wajo View Post

Not sure if Auskck will see this, but that pic of his showing the front view of his 3575 with enclosure and toaster on top, is buttoned-up and in an operational mode with one of his 4 HDDs (or maybe he has 5 now).

that's what I thought, but how do you let the cable hang out the back? Sorry for being slow on the uptake with this, but it's hard (at least for me) to conceptualize. I'm not shy about taking stuff apart - it's when it comes to putting it back together again...

Also, is this routine the same for the 2160a ? I think I remember someone saying it's even easier to upgrade the newer models, but his photos are for the phillips, right? Maybe one plus factor, given the minus (format bug) we've been putting up with. This is very cool - just dont have the guts to rip apart my new toys (not finished breaking it yet!)
artwire is offline  
post #6927 of 25917 Old 10-12-2009, 08:38 AM - Thread Starter
AVS Club Gold
 
wajo's Avatar
 
Join Date: Dec 2005
Posts: 14,054
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 38 Post(s)
Liked: 134



FW Updates

Jump To:

READ THIS FIRST

Ver02C for Freeze/Dead Problem on 513 and 515
BE 727H & SuperFW 727V for 2160A/513/515 - 10/5/11
OLD FW Update 72A for E19 Error in 2160A - 12/29/10 (Superseded by 727H and 727V)
Temp. "L3 Fix" for E19 Error in 2160A - 10/12/09 (Permanently Fixed by 72A, 727H and 727V)
The Story Behind L3

 

READ THIS FIRST... PLEASE!

 

All FW IS ON THE DVD PCB ("MAIN CBA"), so installing a new DVD burner with mated/calibrated PCB as listed here will bring with it all the FW for that DVDR model (as of OEM loading date). One example of this is JimLely's "double-switch" procedure described here.
NONE OF THE FW ON THIS PAGE IS FOR THE NEW 53X MODELS (533/535/537! iNSTALLING ANY OF THESE FW UPDATES ON A 53X MODEL WILL MAKE IT USELESS.ONLY REMEDY THEN IS HELP FROM FUNAI OR REPLACING THE DVD PCB, IF ANY 53X DVD PCB'S ARE AVAILABLE.

 

Generally speaking, as Funai releases NEW user-downloadable FW Updates to fix or expand factory-installed FW ("OEM FW"), they post it for download on the funaiservice.com web page. That page has had some errors that remain uncorrected, so files should be downloaded from the Attachments on this page. Do not change file names of downloaded and extracted files.

 

They generally replace older FW Updates that might have been posted there before because they tend to retain the older FW's workings and add new fixes and/or functionality as needed. OEM FW has never been accessible to users and very likely never will be. See lists of both OEM and User Update FW here.

 

However, there may be cases where you need to reinstall or revert to an older FW version, such as file corruption or disliking a new FW version after trying it. However, it's quite possible that, as they release a new User Update, the replaced (older) FW will no longer be available for download.

Therefore, it's virtually mandatory that you download and stash away ALL compacted FW ZIP* files and instructions given as Attachments here, even if you don't currently have the model it applies to and/or you don't plan on installing it.

 

You can place them in folders, but don't change the file names of the downloaded and expanded files themselves.

 

       *ZIP files are compressed for easier storage and sending to other lost souls.


Go back to list. ...... Go to main list of help files.

 

Ver02C for Freeze/Dead Problem on 513 and 515

 

For fixing a Mag 513/515 that exhibits a repeated, not occasional, freeze condition where it appears "dead' and doesn't respond, even to buttons on front of unit (which eliminates remote batteries as the cause). There might or might not be a front panel display.

 

In the download files below are the Ver02C FW (DTV-S FW 0x2C) plus BE FW 727H for the 513 or 727V for the 515. To fix a "freezing" unit that already has BE FW 727H or 727V, you're really interested only in Ver02C since Funai designed it to work with those BE FW Versions. We also know it works with BE 729V in late-model 515's based on Jerrymc77's report here.

 

The steps for downloading the FW, checking your BE FW, and installing updated FW are as follows:

 

IMPORTANT: FUNAI STRESSES THAT Ver02C SHOULD ONLY BE INSTALLED IF YOU HAVE REPEATED FREEZING OR POWER-ON ISSUES IN A 513 OR 515!

 

7/2/12 - Funai download website is screwed up, so I've updated this page to include the proper files for use. DO NOT go to the Funai website to download FW files or instructions for this FW Update.

 

  1. Download and use these "generic" Funai step-by-step instructions as a guide: 
    FW Instructions 995k .pdf file
     
  2. Download ALL the files below... DO NOT CHANGE THE FILE NAMES.
    Ver02C.zip 1,068k .zip file
  3. Expand/Extract Ver02C and HD6A ZIP files directly or by moving to a folder on your computer... DO NOT CHANGE THE FILE NAMES.
    Don't delete the zip files, they might come in handy someday.
    You should now have the following expanded files: Ver02C.dtv (2,048 KB), HD6A269727H1E.mot (12,179 KB), and HD6A269727V1E.mot (12,179 KB).

     

  4. Check and write down the BE Version currently on your machine, using the SKIP 123 procedure described here.

     

  5. Determine the appropriate FW file(s) you'll need for your machine, which depends on the BE Version it has:

     

        513 - If it already has BE 727H or 727V, you'll need only Ver02C.dtv.

                  If it has BE 718, 72A, 726H or 726V, you'll also need BE HD6A269727H1E.mot.*

     

       515 - If it already has BE 727V or 729V, you'll need only Ver02C.dtv.

                 If it has BE 724V or 726V, you'll also need HD6A269727V1E.mot.

     

        *HD6A269727V1E.mot can be used in a 513 to make it operate like a 515. See "SuperFW 727V" note here.

     

  6. "Send" or burn the appropriate .mot and .dtv files as "data" on a CD or DVD... only the .dtv file if your machine already has the correct BE FW noted above. I recommend a separate disc for each file but you CAN put more than one file on a disc and the machine *should* ask you to select which one you want to upload... to me, sounds like an accident waiting to happen?

    Windows: Follow the detailed, step-by-step Funai Instructions which you should have downloaded in Step 1 above. Anecdotal evidence suggests that the most reliable PC/Burnrate/Disc combo might be WIN-XP/16X/CD-R.

    For WIN XP, right-click on the .mot file and use the Send To command. That should allow you to select an app pkgd with WIN XP (RecordNow is one) for writing the .mot file to disc. If using Record Now (or any other app), if there's an option to create a "Data Disc," that's what you want.

    For WIN 7, in the "Burn to Disc" menu after inserting a disc, click Show Formatting Options, then select 16X as the "Recording Speed."

    For WIN Vista, see the "special" notes in the Funai instructions.

    For a non-MS disc-writing app, ImgBurn is highly recommended and free. Download ImgBurn here. 5 simple steps listed here.

    For Mac, Create a "data disc" from the .mot file using Toast or other disc-creation app that can create pure "data" discs.

     

  7. Set DVDR on DVD drive and upload FW. Start with SKIP 654 and follow the Funai instructions faithfully.
    Do not install BE 727H in a 515.

    Do not install BE 727V in a 515 if it already has 727V or 729V.

    Do not install Ver02C FW in your machine if it does NOT have a recurring and annoying freeze problem.


    Initial reading/loading a FW Update disc can take a minute or two before you see an update progress % count-up, so be patient.

     

    At end of uploading, AFTER 100% progress indicated and Completed message appears, YOU'RE NOT THROUGH! DO NOT SKIP the final steps noted in the instructions. THESE ARE ALL PART OF THE UPLOADING ROUTINE:

     

    • Remove disc from tray. Disc tray stays open.
    • Unplug power cord.
    • Let sit 30 sec.
    • Replug power and press Standby/On switch. Disc tray closes after a few sec.
    • If using HDMI, reactivate it by pressing the HDMI button and going thru the four formats.
    • You're done and ready to redo setup.

 

If the FW doesn't auto-run or it runs longer than 2 min. with no progress display, odds are there's something wrong with the file (e.g., you didn't Unzip/Extract it?). Don't panic, just wait til it decides to quit.


Please let us know if you install the Ver02C FW in your 513 or 515. Tell us the BE Version you wrote down in Step 3 and your subsequent operating results.

 

Go back to list. ...... Go to main list of help files.

 

 

BE 727H & SuperFW 727V for 2160A/513/515 - 10/5/11
 

7/2/12 - Funai download website is screwed up, so I've updated this page to include the proper files for use. DO NOT go to the Funai website to download FW files or instructions for this FW Update.

 

TWO VERSIONS of this FW Update: 727H only for the 2160A/513 and SuperFW 727V for the 515 but also an option for 2160A and 513 owners, as described below.

This FW udpate includes the following:

 

  1. Fixes an HDMI Control (CEC) problem first reported by KrazyJeffSD on 9/16/11, where his 513 turned his TV on for a timer rec program while he was gone... shouldn't do that.
  2. Fixes E19 Finalize and other Disc Edit menu problems in a 2160A with timer programs set.
  3. Fixes failure of AR to start in some machines.
  4. Eliminates double "Are You Sure?" dialogs.
  5. Eliminates confusing auto-Preview after an End-Cut.
  6. Changes "Empty Title" to "Empty Space" on DVDs.
  7. Fixes problem of timer programs being deleted by making changes to other timer programs.
  8. Even more important than 1-7, SuperFW 727V intended for the 515 can be installed in the 2160A and 513 to give those units all the operating features of the 515... and it's reversible if you don't like it.

 

* * * * * * *

CAUTION:

A FW Update is each user's sole responsibility. A failed FW Update due to power loss or other unknown event, like operator error, could require you to replace the DVD burner and its mated/calibrated PCB ($68).

Mistakenly installing an older FW for a machine that pre-dated yours... "downdating" as Funai calls it... could make your machine operate like the older one. It's recoverable only by replacing your machine's DVD CBA (PCB), where all FW resides, i.e., you can't simply install a newer FW designed for your machine... it won't "take." Reverting to a previous FW designed for your machine is OK, like reverting from 727V to 727H in a 513, or to 72A in a 2160A.

Updating the FW in your machine(s) could cause serious problems if you don't take the process seriously and faithfully follow EACH STEP as instructed by Funai.


* * * * * * *

To install the 727 FW Update in your 2160A/513/515, follow these steps and the Funai instructions, which are in one of the files you'll be downloading.

 

The Funai download page has had some errors that remain uncorrected, so files should be downloaded from the Attachments on this page.

 

  1. Take a pic or write down your Timer programs.
    This FW update will reset your 2160A/513/515 to factory defaults. You'll lose timer rec programs, channel memory, custom settings, and maybe the clock, but not recorded titles.
     
  2. Verify that you have one of the units this FW applies to.
    Check the tag on the back of your recorder and verify that it shows one of these combinations:
     
    Model No. Model Name*
    2160A E2S00UD
    513 E2S00UD or E2S01UD
    515 E2S02UD

    This FW is NOT for the original 2160 (E2M01UD) or the 357x (E2H40UD)... I tried in both, rejected in both, but scary til then. Don't try this at home!
     
  3. For 513/515, make sure you don't already have BE Version 727V or 729V.
    Depending on when and where you bought your 513/515, it could already have BE 727V or 729V, which means there is nothing to update so you should NOT install either of these updates. Check with SKIP 123 procedure, Step 1.
     
  4. Open and save these Funai step-by-step instructions:
    FW Instructions 995k .pdf file
     
  5. Download BOTH of these compressed FW .zip files and save them in separate, approp. named folders... DO NOT CHANGE THE FILE NAMES:

    This is FW 727H designed for the 2160A and 513 only. However, see info on "SuperFW 727V" next for a more "interesting" update. In any case, download this FW ZIP file anyway, even if you don't currently have this model, and stash it away with filename, date, etc.
    HD6A269727H1E.zip 3,574k .zip file

    This is FW 727V designed for the 515 but it's also the user-tested FW Update for the 2160A and 513, as described below.
    HD6A269727V1E.zip 3,577k .zip file
    SuperFW 727V

    I call the 727V FW Update for the 515 "SuperFW" because it can be installed in the 2160A (Model E2S00UD mfgd in 2009) and the 513, and it will add ALL the 515's benefits as listed here, except for the longer battery backup, 500GB HDD and better remote. Install a 500GB HDD and buy a 515 remote and you'll have a 515!

    It is NOT for the orig. 2160 (Model E2M01UD mfgd in 2008) or any other Mag/Philips model.

    Great thanks to Bizarro_Stormy for being the first to take a big risk in trying 727V in his 2160A... he proved that it works! Subsequently, Ken.F tried 727V in his 513 with the same positive results! (See "Info on 513 FW Versions Seen to Date" below for help if you have trouble updating a 513.)

    727V Can Be Reversed - SuperFW 727V can be reverted back to previous FW in a 2160A or 513.
  6. "Extract" the 727H or 727V FW .zip file you plan to use, based on info in step above... DO NOT CHANGE THE FILE NAMES.
    The file will unzip/extract to 12,179 KB with a filename extension of .mot.
    Don't delete the zip files, they might come in handy someday.
     
  7. "Send to" or burn the .mot file as "data" on a CD or DVD.

    Windows: Follow the detailed, step-by-step Funai Instructions which is one of the files you must download from the link above. Anecdotal evidence suggests that the most reliable PC/Burnrate/Disc combo might be WIN-XP/16X/CD-R.

    For WIN XP, right-click on the .mot file and use the Send To command. That should allow you to select an app pkgd with WIN XP (RecordNow is one) for writing the .mot file to disc. If using Record Now (or any other app), if there's an option to create a "Data Disc," that's what you want.

    For WIN 7, in the "Burn to Disc" menu after inserting a disc, click Show Formatting Options, then select 16X as the "Recording Speed."

    For WIN Vista, see the "special" notes in the Funai instructions.

    For a separate disc-writing app, ImgBurn is highly recommended and free. Download ImgBurn here. 5 simple steps listed here.

    Mac: Create a "data disc" from the .mot file using Toast or other disc-creation app that can create pure "data" discs.

    For use and for storage, you can put more than one FW update on a disc, like 72A, 727H and 727V, and the machine *should* ask you to select which one you want to upload.
     
  8. Set DVDR on DVD drive and upload FW. Start with SKIP 654 and follow the Funai instructions faithfully.
    Initial reading/loading a FW Update disc can take a minute or two before you see an update progress % count-up, so be patient.

    At end of uploading, AFTER 100% progress indicated and Completed message appears, YOU'RE NOT THROUGH! DO NOT SKIP the final steps noted in the instructions. THESE ARE ALL PART OF THE UPLOADING ROUTINE:
    If the FW doesn't auto-run or it runs longer than 2 min. with no progress display, odds are there's something wrong with the file (e.g., you didn't Unzip/Extract it?). Don't panic, just wait til it decides to quit. Here's a pic that Ken.F took of his 513's FW Version screen, showing the 727H FW he installed from a CD-R. He subsequently installed 727V in his 513 and got all the op benefits of the 515.
    • Remove disc from tray. Disc tray stays open.
    • Unplug power cord.
    • Let sit 30 sec.
    • Replug power and press Standby/On switch. Disc tray closes after a few sec.
    • If using HDMI, reactivate it by pressing the HDMI button and going thru the four formats.
    • You're done and ready to redo setup.

  9. Set machine back up and return all General Settings to your normals.
    A FW update RESETS your machine to factory fresh, so you'll have to set it back up from scratch, incl. all your customized General Settings (Auto Clock, Video In, etc.). My recommended settings are here.
     
  10. Refer to your unit as a V2160A, V513 or V515 when posting here.
    This will help people immediately recognize that you have a unit, even a 515, with the SuperFW Update in it. This special model I.D. should be used only between us... it's not appropriate for other uses since no one will know WTH you're talking about! Thanks to Ken.F for suggesting that we need a special "name" for these super units!

 

Info on 513 FW Versions Seen to Date

The 513 has had two distinct models with diff. model numbers and even some 'oddball" FW Versions. So far, we've had a couple of problems updating 513's, with reports of eventual success by:
1. Burning data disc slower (16X rather than 48X).
2. Burning data disc on computer with WIN XP rather than Vista.

We don't think the problems stem from the BE FW already in 513's but, for future ref., here are the current 513 Model/BE FW combinations we've found in new and refurb units:
 

Description DVDR/FW Date Model BE FW 727V Success?
Early-513 OEM FW DVDR Apr-Jun 2010 E2S00UD HD6A269718H1E YES
Late-513 OEM FW DVDR Jul-> 2010 E2S01UD HD6A26972AH1E YES
Odd 513 OEM FW DVDR 8/11 Unknown HD6A269726H1E* YES. More info (2 posts).
Odd 513 OEM FW Unknown Unknown HD6A269726V1E* YES. More info.
1st 513 FW Update FW 10/5/11 N/A HD6A269727H1E YES
*726H/V do not have the pre-titling of timer rec programs or program skip features of SuperFW 727V.


Go back to list. ...... Go to main list of help files.

 

END OF CURRENT UPDATES
 

* * * * * * *

OLD FW Update 72A for 2160A and 513- 12/29/10 (Superseded by 727H/V)

 

7/2/12 - Funai download website is screwed up, so I've updated this help file to include the proper files for use. DO NOT go to the Funai website to download FW files or instructions for this FW Update.

 

Back-End (BE) FW "72A" is a SUPERSEDED update for the 2160A and 513 for several fixes.

I recommend that you download this FW anyway, even if you don't currently have this model, and stash it away with filename, date, etc. for future use... this FW will disappear if Funai releases a new FW Update.

The 72A FW did the following:

 

  1. Fixed the E19 error in the 2160A.
  2. Fixed the failure of AR to start in some machines.
  3. Eliminated double "Are You Sure?" dialogs.
  4. Eliminated the confusing auto-Preview after an End-Cut.
  5. Changed "Empty Title" to "Empty Space" on DVDs.

 

* * * * * * *

Note: A FW update is each user's sole responsibility. A failed FW update due to power loss or other unknown event can turn your unit into a brick.

To install this superseded 72A FW in your 2160A or 513, rather than the newer 727H/V, follow these steps and the Funai instructions, which is in one of the files you'll be downloading.

 

  1. Take a pic or write down your Timer programs.
    This FW Update will reset your 2160A or 513 to factory defaults. It'll wipe clock, timer rec programs, and channel memory and change General Settings to their defaults (Skip/Replay, Auto Clock, Video Input, TV Aspect, Make Recording Compatible, etc.). Check all settings and reset as necessary. Recorded titles are not affected.
  2. Verify that you have one of the units this FW applies to.
    Check the tag on the back of your recorder and verify that it shows one of these combinations:
     
    Model No. Model Name*
    2160A E2S00UD
    513 E2S00UD or E2S01UD
    *Model Name is in bottom-right corner of tag.
     
  3. Open and save the FW Instructions from Step 4 in the previous section above.


  4. Download this 72A FW Update for the 2160A... DO NOT CHANGE THE FILE NAMES:
    HD6A26972AH1E.zip 3,798k .zip file
  5. "Extract" the .zip file on a PC... DO NOT CHANGE THE FILE NAMES.
    The file will unzip/extract to 12,179 KB with a filename extension of .mot.
    Don't delete the zip files, they might come in handy someday.
     
  6. "Send" or copy the .mot file to a CD or DVD.
    You could also create a DVD using the RecordNow app pkgd w/Windows... it has an option for a Data Project > Create Data Disc.
     
  7. Set DVDR on DVD drive and install FW in accordance with the instructions.
    If the FW doesn't auto-run or it runs longer than 2 min. with no progress display, odds are there's something wrong with the file (e.g., you didn't Unzip/Extract it?) or you're trying to load the FW on the wrong machine (whereupon it'll normally spit it back out). In any case, don't panic, just wait til it decides to quit.
     
  8. Set machine back up and return all General Settings to your normals.
    A FW update RESETS your machine to factory fresh, so you'll have to set it back up from scratch, incl. all your customized General Settings (Auto Clock, Video In, etc.). My recommended settings are here.

 

Go back to List. ...... Go to main list of help files.


Temp. "L3 Fix" for E19 Error in 2160A - 10/12/09

This is an "operational" E19-fix for users of the 2160A who can't or don't want to install the 72A FW Update (a permanent fix) as described above:

 

  1. Set your 2160A's Source to L3 (DV) with Source button on remote... no DV cable connected.
     
  2. Finalize, Format, Erase, and Delete the Empty Title normally!
    (You don't need to delete timer rec programs with this procedure.)

 

Important Notes on L3 Workaround:

 

  1. This procedure applies only to the 2160A with 2009 mfg dates (on back sticker). The original 2160 with 2008 mfg dates and the 513 with 2010 mfg dates do not require this workaround.
     
  2. To Format a new DVD±RW disc for 1st use, you MUST have the unit on L3 BEFORE inserting the disc cuz the Formatting starts immediately w/o any user action. It doesn't matter which drive is selected at time of this process but, if on the DVD drive, you'll see a progress bar on the TV screen plus chasing lines in the display, and if on the HDD drive, only the chasing lines in the display. RW discs only need one initial formatting for continual use. DVD±R don't get formatted, so no special actions reqd before 1st use.
     
  3. To Erase an RW or Finalize any recorded discs, you can insert the disc first, set Source to L3 (DV), open the Disc Edit menu and select option (after the disc loads, of course, ~20 sec).
     
  4. Remember the normal "lockout" times: you can't start a Finalize within 1-hour of the next timer rec program, and you can't Format or Erase within 15 minutes.
     
  5. While on L3, short "flashes" on screen mean nothing... don't worry about them.
     
  6. While on L3, don't press any buttons other than the Setup button to get to the Disc Edit option you need. Don't get curious or frisky with other buttons, esp. SKIP + # buttons... I've already done that!
     
  7. Setting the 2160A on L3 dumps the accumulated buffer and stops background recording.

 

Go back to List. ...... Go to main list of help files.

The Story Behind L3

10/12/09 - Some have expressed interest in how I came up with the L3 workaround, so here's a brief explanation.

After lots of unsuccessful tests with different settings suggested by many people, this problem seemed to be unsolvable by us. The only workaround had been to delete all timer-rec programs before doing any Disc Edit op (Format/Erase/Finalize)... a royal pain in the arse!

I kept checking the Funai FW download page to no avail... a FW update really didn't appear to be forthcoming.

On 10/12/09, knowing how frustrated 2160A users must be (I don't have an "A" model), I decided to re-address some nagging questions I had, which led to a provable theory of how to kill the bug without a FW update. The thought process went something like this.

Normally, there's a connection between timer rec programs and the Disc Edit ops like Format, Erase and Finalize. A RW Format or Erase can't be started unless there's at least 15-min. before the next timer program, and a -R/+R/-RW Finalize must have at least 1-hour.

The FW Bug in the 2160A was different in that it would allow users to start a Disc Edit op, but it would fail at the 90% point with an "E19" error... about the time for a "write-to-disc" op. This suggested a "read-write" component instead of, or in addition to, a program-timer component... maybe some sort of "interference" going on between the two?

E19 is stated as "Safety Stop during editing." The "during editing" was obviously the Disc Edit read-write op it was involved in at the time (Format/Erase/Finalize), and "Safety Stop" meant the FW saw a problem during that read-write op that reqd it to abort the process.

That "problem" must be more than the next timer rec start time since the process would start OK, and the only read-write op going on at the 90% point *might be* Autostart Recording (AR), even tho opening the Disc Edit menu was supposed to stop AR.

But, what if it wasn't stopping AR? And if not, was there a way to manually stop, or suspend, it to see if the "interference" would go away and allow Disc Edit ops with timer programs set? Only chance to do that for "bug-killing" purposes seemed to be opening one of the menus that dump the buffer or setting the Source to a line input. The menus were out cuz that would preclude opening the Disc Edit menu, and we already knew THAT menu didn't work. That left only a line input.

I had tested L1 and L2 before on my original 2160, so I just confirmed again that they restarted AR after they dumped the buffer. However, my Eureka! moment came when I realized I had never tested L3. When I did, it dumped the buffer as expected, but it ALSO suspended AR for as long as the machine was on L3... unlike L1 and L2, it won't start ANY recording without a DV source connected. While in this "permanent" waiting mode, it also allowed me to open the Disc Edit menu and perform disc ops in my original 2160!

Tantalizingly close now!?

Since I don't have a 2160A, I couldn't test the full theory on the so-called E19 bug, but armed with my newfound operating info and unproven theory, I asked for a volunteer tester. Artwire responded, did the test and proved my theory: L3 worked as the E19 bug killer! He also tested RW Format and Erase and found both also worked while on L3.

Here are the two posts on the actual test.

Go back to List. ...... Go to main list of help files.

Attached Files
File Type: zip HD6A26972AH1E.zip (3.71 MB, 32 views)


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
wajo is offline  
post #6928 of 25917 Old 10-12-2009, 09:14 AM
Member
 
George55's Avatar
 
Join Date: Apr 2006
Posts: 46
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Maybe this was addressed before but I just missed it.

I want to fill a small 10G USB memory stick with all my music CD's that I converted to MP3's and use the 3576 as a virtual juke box. My question is, does the hard drive continue to run anytime the 3576 is on or will it time out and power down because it's the USB port not the HD being used? With 100+ CD's I thought this would be a good way to have them easily accessible to my main sound system but not at the expense of wearing out the HD.

Also, (and maybe this is addressed in the manual) is there a max # of files and directories that the system will recognize? If I have 100 CD's with say 15 songs each that would be 1500 titles/files/tracks in 100 directories.

And yes... I do know that I could use a laptop for this vs the 3576 but that's not a option at this time.

tnx
George
George55 is offline  
post #6929 of 25917 Old 10-12-2009, 09:25 AM
AVS Special Member
 
artwire's Avatar
 
Join Date: Feb 2009
Posts: 1,208
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by wajo View Post

It's easier for the 2160A cuz it alread has a SATA HDD.

Like anyone who hasn't actually done this build, like Auskck has, I ass-u-me he cut, drilled or Dremeled a small slot in the back top edge of the case for the ESATA cable... I don't see any back shots of his finished build in his album with the pic linked to above?

See, baby steps! I'm not a power tool person -- as you probably have guessed Thanks! Figured it was something like that but it was probably so obvious no one mentioned it. I tend to try to keep my stuff as hole-free as possible! But for a good cause, maybe I'll sacrifice on to the experiment... AFTER the warranty ! Meanwhile, I'm trying to get into the good habit of burning stuff soon after recording so I dont get too far behind. For now I'm double recording in two different rooms if It's something I know I want to keep. May switch over to recording on to drive and one to DVD at the same time, but I definitely want more than one copy.

The other day I couldn't figure out what was taking so long for a dub - I goofed up and even though I thought I was copying less than 2 hrs. the damn thing too 5 hours to copy.Turned out I had forgotten to cut the CNN segment down - I had been editing around 10 short recordings and missed that one , so I ended up real-time dubbing 4 hrs of 'news' to get a 7 minute segment (at crappy quality, no less). Redubbed it in 15 minutes at HSD after I figured out what I had done wrong. This is easy but you do have to pay attention -- lack of labeling a little hard to deal with, so as I get more adept at this, I may just try to keep better track of what I'm recording when I do it, to make it esier to tally the dub times. You cant track by number, since that constantly changes, so I guess time/date is the best bet
artwire is offline  
post #6930 of 25917 Old 10-12-2009, 10:03 AM
Senior Member
 
Lazza's Avatar
 
Join Date: Feb 2009
Posts: 226
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by George55 View Post

Maybe this was addressed before but I just missed it.

I want to fill a small 10G USB memory stick with all my music CD's that I converted to MP3's and use the 3576 as a virtual juke box. My question is, does the hard drive continue to run anytime the 3576 is on or will it time out and power down because it's the USB port not the HD being used? With 100+ CD's I thought this would be a good way to have them easily accessible to my main sound system but not at the expense of wearing out the HD.

Also, (and maybe this is addressed in the manual) is there a max # of files and directories that the system will recognize? If I have 100 CD's with say 15 songs each that would be 1500 titles/files/tracks in 100 directories.

And yes... I do know that I could use a laptop for this vs the 3576 but that's not a option at this time.

tnx
George

I think few folks use the 3576 to play ,mp3 audio. I would assume the HD is not being used when the USB stick is being read, or at least I don't know why it would it continue to stay on.

But George, I would be interested in your experience with the 3576 and .mp3 files on a USB stick. I would use it to randomly play perhaps 100 songs. Unfortunately in between many of the songs I would be a loud blaring sound, a music snippet for less than a second. Really annoying. I tried using different USB sticks and got the same problem. I now play .mp3 files off a USB stick from my DVD player (a Yamaha).


_Lazza
Lazza is offline  
Reply DVD Recorders (Standard Def)

Tags
Magnavox Mdr515h 500gb Hdd And Dvd R With Digital Tuner
Gear in this thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off