Well idiot me, when marking on my MDF pieces where to apply the nails, had a slip of the hand and left a nice 2" pencil mark on my otherwise brilliant silverfire screen. I erased the pencil mark with the eraser and now there is a lackluster area where it appears the reflectivity has been rubbed away. It is mostly visible when a bright area hits that spot, but its definitely a nuisance to the eye when the rest of the picture looks so good. Any advice from you guys on a way to fix this without having to repaint?
NTW, I was able to get the finish nails to work out without buying a finish nailer. I used a 3/16" drill bit and just put holes through the MDF that are perfect size to slide the finish nails in there. After the pieces were in place, just used a finishing driver and the hammer and it looks great.