OK...first up, a description of the Room:
16 feet deep x 21 feet wide with 9' Ceilings
Screen Wall has 146" wide x 12" deep Inset with 54" Sides
Recessed Equipment Rack with Rear Access via Closet
The Screen Dimensions are 120" x 50" .........Taped Border is 121" x 51"
So let's paint'er up.
A humble note:
I somehow forgot how to use my Timer "and" press the right button for starting a Video, resulting in two timed "snapshots" instead of my first quick Duster and 2nd normal Duster.
BTW....The Graco Gun Assembly is using a 1.0 mm Needle / Nozzle and a adapted Hose that allows me to use a Wagner Control Spray Max as my turbine unit. I have the output on the Turbine set to Maximum, and the output on the Gun dialed back 25%
So this first Video, which shows me applying a 3rd Coat, is being done as a quick Duster so that Folks can see the speed and distance involved.
And this "4th Coat" is done in the normal speed....but still essentially a "Duster"
One last Video....the 5th Coat (...there were a total of 7...) where i went at a speed of 2' per second...the slowest I can recommend, and made possible by the use of the 1.0 needle and it's finer Mist-like spray.
Here is my best'ist Friend.......a 20" Pole Fan that allows me to hasten dry times between coats to 15 minutes on average....20 at most.
That is pretty much all for tonight....., Tomorrow AM I will cover the Screen with protective Plastic so the painters can paint out the room in SW's Peppercorn. Below is an example of such: