Blackout cloth vs white matte paint for ctr - AVS Forum
Forum Jump: 
 
Thread Tools
post #1 of 2 Old 02-10-2004, 08:04 PM - Thread Starter
Newbie
 
Spyjoe's Avatar
 
Join Date: Aug 2003
Location: Monteal Canada
Posts: 13
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Hi, just wondering what would give best results (IQ, brightness etc) if using either a blackout cloth or a matte white painted surface. The projector is a crt (specifically an electrohome 4100ecp). I realize that the blackout cloth would have the advantage of being perfectly flat since it can be stretched over a frame but for the sake of discussion lets assume i can achieve the same flatness with the painted surface.....thanks for all your help
Spyjoe is offline  
Sponsored Links
Advertisement
 
post #2 of 2 Old 02-10-2004, 10:09 PM
AVS Special Member
 
b2bonez's Avatar
 
Join Date: Dec 2003
Location: Ducking for cover....
Posts: 5,484
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
By all accounts, a wall painted with 2 coats of Ultra Pure flat white paint
is the cheapest and easiest ~1.0 gain DIY screen around.

Everything else is harder, more expensive and has more chance of
not giving a reasonable return on a cost-effort basis.

b2b

"Listen, You Pencil Neck Geeks.." 'Classy' Freddie Blassie ~ 1918-2003
A Toshiba spokesman, said that "from an engineer's point of view, the Blu-ray is a masterpiece.."
b2bonez is offline  
Closed Thread DIY Screen Section

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off