I just took delivery of a Rhythmik F12SE to add to my dual ported SVS PC12NSD
I am running a triple subs set up in a 5.1 system.
AVR is the Denon 3808 with Audyssey XT.
I am also using the AM8033C for bass correction.
I have the two ported subs in front, with both subs' phase set to 0 and connected via a Y connector to the 0 phase output of the AM8033C.
I have the sealed Rhythmik at the rear left of my sofa. I am using the LFE input and set the phase to 180. This sub is connected to the 180 deg phase output of the AM8033 as recommended by AntiMode.
I read some where here, that if connected to the LFE input, this bypass the phase and cross-over in the F12SE.
Will this interfere with the AM8033C 's calibration, which recommended the phase to be set to 180?
Should I instead use the line input of the F12, which enables the phase control?
Thank you and sorry for the long post.