What sub or subs would I need a 4000 cubic ft Room - AVS Forum
Forum Jump: 
 
Thread Tools
post #1 of 8 Old 06-03-2014, 06:44 PM - Thread Starter
Member
 
grimed's Avatar
 
Join Date: Apr 2014
Posts: 34
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10

As you can see on the post I have a 4000 cubic ft room.  This also has a large opening in the back off the room.

 

I will be using 3 JTR 228's or two Sierra 2 towers and a Horizon center channel. May even go for  2 diy speakers the 12 in tempest for the fronts and the Alchemy for the center.

 

This dosn't have to be a vendor type of Sub but I have few tools to work with for DIY.

grimed is offline  
Sponsored Links
Advertisement
 
post #2 of 8 Old 06-04-2014, 09:00 AM
AVS Special Member
 
basshead81's Avatar
 
Join Date: Mar 2013
Location: Fort Wayne, IN
Posts: 6,458
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 38 Post(s)
Liked: 1709
Passive Captivstor 2400's or DIY Mini Marty's with UXL-18 or Dayton UM-18 drivers. For power Peavy IPR 7500 w/ a mini dsp or Inuke 6000dsp
basshead81 is offline  
post #3 of 8 Old 06-04-2014, 09:03 AM
AVS Special Member
 
JT78681's Avatar
 
Join Date: Apr 2012
Location: Austin, Texas
Posts: 1,365
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 232 Post(s)
Liked: 184
What's your budget?

Receiver - Denon 4311CI
Speakers - Infinity P363's, PC351, P153's
Subs - Rythmik FV15HP's
JT78681 is online now  
post #4 of 8 Old 06-04-2014, 03:42 PM
AVS Special Member
 
Alan P's Avatar
 
Join Date: Jan 2003
Location: Rapid City, South Dakota
Posts: 2,977
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 838 Post(s)
Liked: 437
Quote:
Originally Posted by grimed View Post

As you can see on the post I have a 4000 cubic ft room.  This also has a large opening in the back off the room.

I will be using 3 JTR 228's or two Sierra 2 towers and a Horizon center channel. May even go for  2 diy speakers the 12 in tempest for the fronts and the Alchemy for the center.

This dosn't have to be a vendor type of Sub but I have few tools to work with for DIY.

Are you including the room(s) beyond the large opening in your "4000 cu. ft." calculation?

AVR: DENON 2113ci
FL/R: Klipschorn
CC: Klipsch RC64ii
SUR: Polk LS F/X x 4
SUB: PSA XS15 x 4 (Soon to be replaced with dual T-18s!)
DISP: Mitsubishi WD-73740
Alan P is online now  
post #5 of 8 Old 06-04-2014, 06:07 PM - Thread Starter
Member
 
grimed's Avatar
 
Join Date: Apr 2014
Posts: 34
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10
Quote:
Originally Posted by Alan P View Post


Are you including the room(s) beyond the large opening in your "4000 cu. ft." calculation?

No that area is speperat.

Budget wise i think i can swing the FV15hp I called and they said that should be enogh with out working the sub to hard.

I am retuning my speakers until i pay off the sub. I havnt bouht it yet but I would need to spend more for the Mary sub  after buying the amp  driver and all probly.

I wanted to do DIY for a sub but if i get the table saw, router and so on I would be spening a good bit more I belive.

grimed is offline  
post #6 of 8 Old 06-04-2014, 06:12 PM - Thread Starter
Member
 
grimed's Avatar
 
Join Date: Apr 2014
Posts: 34
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 10

Quick question if I used a Mini DPS would a Ipad or a Mac pro work. I dont have a lap top so if a Ipad would work, that would cut back some of the cost, if a Mini DSP would help much with just I Sub

grimed is offline  
post #7 of 8 Old 06-05-2014, 08:50 AM
AVS Special Member
 
Alan P's Avatar
 
Join Date: Jan 2003
Location: Rapid City, South Dakota
Posts: 2,977
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 838 Post(s)
Liked: 437
Quote:
Originally Posted by grimed View Post

No that area is speperat.
Budget wise i think i can swing the FV15hp I called and they said that should be enogh with out working the sub to hard.
I am retuning my speakers until i pay off the sub. I havnt bouht it yet but I would need to spend more for the Mary sub  after buying the amp  driver and all probly.
I wanted to do DIY for a sub but if i get the table saw, router and so on I would be spening a good bit more I belive.

It is not "separate" to your sub....you need to include it into your cubic foot calculations. If you are telling Rythmik that your room is only 4000 cubic feet and they are making recommendations based off that number, those recommendations are not going to be accurate.

Quote:
Originally Posted by grimed View Post

Quick question if I used a Mini DPS would a Ipad or a Mac pro work. I dont have a lap top so if a Ipad would work, that would cut back some of the cost, if a Mini DSP would help much with just I Sub

Not sure if the MiniDSP plugins will run on a Mac. You should contact support.

You will need some way to measure your room (REW + mic) before you will be able to use the MiniDSP.

AVR: DENON 2113ci
FL/R: Klipschorn
CC: Klipsch RC64ii
SUR: Polk LS F/X x 4
SUB: PSA XS15 x 4 (Soon to be replaced with dual T-18s!)
DISP: Mitsubishi WD-73740
Alan P is online now  
post #8 of 8 Old 06-05-2014, 08:53 AM
AVS Special Member
 
JT78681's Avatar
 
Join Date: Apr 2012
Location: Austin, Texas
Posts: 1,365
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 232 Post(s)
Liked: 184
Can you take a picture of the back of the room? I want to see what this opening looks like.

Receiver - Denon 4311CI
Speakers - Infinity P363's, PC351, P153's
Subs - Rythmik FV15HP's
JT78681 is online now  
Reply Subwoofers, Bass, and Transducers

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off