X-Rite's i1Diagnostics 4.0.0.127 Released - AVS Forum
Forum Jump: 
 
Thread Tools
post #1 of 12 Old 04-03-2013, 01:56 PM - Thread Starter
AVS Special Member
 
ConnecTEDDD's Avatar
 
Join Date: Sep 2010
Location: Athens, Greece
Posts: 2,241
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 69 Post(s)
Liked: 449
i1Diagnostics allows you to test your X-Rite measurement instrument functionality and update licenses on your device. Use of this application by end users is recommended when problems are experienced with the measurement instrument. i1Diagnostics creates a report which can be sent to X-Rite support for further investigation if problems persist.

Download Link

The latest version of i1Diagnostics (4.0.0) supports the following instruments:

• i1Pro
• i1Pro 2
• i1iO

Please use the previous version (2.5) for the following instruments:

• i1iSis
• i1Display 1 & 2

You can download i1Diagnostics 2.5 here: www.xrite.com/support/i1Diagnostics

Ted's LightSpace CMS Calibration Disk Free Version for Free Calibration Software: LightSpace DPS + CalMAN ColorChecker
S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, CalPC, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1D3, C5
ConnecTEDDD is online now  
Sponsored Links
Advertisement
 
post #2 of 12 Old 04-04-2013, 05:57 AM
Member
 
Killerbeenl's Avatar
 
Join Date: Dec 2007
Location: Netherlands
Posts: 160
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 13
thanks for sharing :thumbup:

Sometimes you are 1 click away from pulling your hair out and bang your head against the wall
Killerbeenl is offline  
post #3 of 12 Old 04-04-2013, 09:17 AM
AVS Special Member
 
Rolls-Royce's Avatar
 
Join Date: Apr 2003
Location: Victorville, CA
Posts: 2,003
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Liked: 61
Thanks, Ted!biggrin.gif

...Royce...

"I never drink...wine."
Bela Lugosi, DRACULA, 1931
Rolls-Royce is online now  
post #4 of 12 Old 04-04-2013, 09:40 AM
AVS Special Member
 
PlasmaPZ80U's Avatar
 
Join Date: Feb 2009
Posts: 7,128
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 59 Post(s)
Liked: 193
thanks for the link...

I ran it on my rev d i1pro and it mentions:

"Instrument information
Instrument inspection: Successful
Serial number i1Pro:
Type: i1Pro
Revision: D
Firmware version: 505
CPLD version: 999
Dark measurement count: 244638
Lamp burning time: 1594.9 seconds
Spot measurement count: 3896
Scan measurement count: 282
Factory calibration: 2/17/2010
Spectral Module ID:"

Does this mean my meter is about 3 years old? Or does it just mean it was sent back to X-Rite in Switzerland for factory re-calibration/re-certification on 2/17/2010?


Also what does the following mean?

"Instrument Licenses
Measurement Modes: [Reflectance Spot, Reflectance Scan, Emission, Ambient Light Spot, Ambient Light Scan]
Licensed functionality: [Has Ambient Light, Spectral values, Tristimulus, Density]
Licensed Modules:
i1Match Module "Scanner": NOT licensed
i1Match Module "Monitor": licensed
i1Match Module "Printer": NOT licensed
i1Match Module "Printer RGB only": NOT licensed
i1Match Module "Printer CMYK only": NOT licensed
i1Match Module "Beamer": NOT licensed
i1Match Module "Printer Easy RGB": NOT licensed
i1Match Module "Printer Easy CMYK": NOT licensed
i1Match Module "Digicam": NOT licensed
i1Match Module "Editor": NOT licensed
i1Profiler Module "Display Profiling": NOT licensed
i1Profiler Module "RGB Printer Profiling": NOT licensed
i1Profiler Module "CMYK Printer Profiling": NOT licensed
i1Profiler Module "Printer QA": NOT licensed
i1Profiler Module "Advanced-Mode": NOT licensed
i1Profiler Module "Projector": NOT licensed"
PlasmaPZ80U is offline  
post #5 of 12 Old 04-04-2013, 09:45 AM - Thread Starter
AVS Special Member
 
ConnecTEDDD's Avatar
 
Join Date: Sep 2010
Location: Athens, Greece
Posts: 2,241
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 69 Post(s)
Liked: 449
Quote:
Originally Posted by PlasmaPZ80U View Post

Does this mean my meter is about 3 years old? Or does it just mean it was sent back to X-Rite in Switzerland for factory re-calibration/re-certification on 2/17/2010?

Exactly, Only the X-Rite can access the i1PRO1/2 internally to change these informations. I have send mine to Switzerland and that date was updated after receiving it back. Firmware version stayed the same.

Ted's LightSpace CMS Calibration Disk Free Version for Free Calibration Software: LightSpace DPS + CalMAN ColorChecker
S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, CalPC, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1D3, C5
ConnecTEDDD is online now  
post #6 of 12 Old 04-04-2013, 09:56 AM
Advanced Member
 
ElectronicTonic's Avatar
 
Join Date: Feb 2008
Location: Ventura, CA
Posts: 945
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked: 58
Quote:
Originally Posted by PlasmaPZ80U View Post



Also what does the following mean?

"Instrument Licenses
Measurement Modes: [Reflectance Spot, Reflectance Scan, Emission, Ambient Light Spot, Ambient Light Scan]
Licensed functionality: [Has Ambient Light, Spectral values, Tristimulus, Density]
Licensed Modules:
i1Match Module "Scanner": NOT licensed
i1Match Module "Monitor": licensed
i1Match Module "Printer": NOT licensed
i1Match Module "Printer RGB only": NOT licensed
i1Match Module "Printer CMYK only": NOT licensed
i1Match Module "Beamer": NOT licensed
i1Match Module "Printer Easy RGB": NOT licensed
i1Match Module "Printer Easy CMYK": NOT licensed
i1Match Module "Digicam": NOT licensed
i1Match Module "Editor": NOT licensed
i1Profiler Module "Display Profiling": NOT licensed
i1Profiler Module "RGB Printer Profiling": NOT licensed
i1Profiler Module "CMYK Printer Profiling": NOT licensed
i1Profiler Module "Printer QA": NOT licensed
i1Profiler Module "Advanced-Mode": NOT licensed
i1Profiler Module "Projector": NOT licensed"
Just download the iMatch software and see what you can use with it. Make sure you start up the software first, then connect your i1Pro.
ElectronicTonic is online now  
post #7 of 12 Old 04-04-2013, 10:38 AM - Thread Starter
AVS Special Member
 
ConnecTEDDD's Avatar
 
Join Date: Sep 2010
Location: Athens, Greece
Posts: 2,241
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 69 Post(s)
Liked: 449
Quote:
Originally Posted by PlasmaPZ80U View Post

thanks for the link...

Also what does the following mean?

"Instrument Licenses
Measurement Modes: [Reflectance Spot, Reflectance Scan, Emission, Ambient Light Spot, Ambient Light Scan]
Licensed functionality: [Has Ambient Light, Spectral values, Tristimulus, Density]
Licensed Modules:
i1Match Module "Scanner": NOT licensed
i1Match Module "Monitor": licensed
i1Match Module "Printer": NOT licensed
i1Match Module "Printer RGB only": NOT licensed
i1Match Module "Printer CMYK only": NOT licensed
i1Match Module "Beamer": NOT licensed
i1Match Module "Printer Easy RGB": NOT licensed
i1Match Module "Printer Easy CMYK": NOT licensed
i1Match Module "Digicam": NOT licensed
i1Match Module "Editor": NOT licensed
i1Profiler Module "Display Profiling": NOT licensed
i1Profiler Module "RGB Printer Profiling": NOT licensed
i1Profiler Module "CMYK Printer Profiling": NOT licensed
i1Profiler Module "Printer QA": NOT licensed
i1Profiler Module "Advanced-Mode": NOT licensed
i1Profiler Module "Projector": NOT licensed"

Your Registed Licencies are correct. The 'NOT Licenced' features were for X-Rite's iMatch or iProfiler Software only. You need i1Publish Upgrade A or B to unlock them if you have i1PRO2 or i1Photo Upgrade if you have i1PRO1, If you enable these extra licences when you can use the included accesories of i1PRO, Ruler, ColorChecker etc. No usage for Display Calibrations etc.

Ted's LightSpace CMS Calibration Disk Free Version for Free Calibration Software: LightSpace DPS + CalMAN ColorChecker
S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, CalPC, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1D3, C5
ConnecTEDDD is online now  
post #8 of 12 Old 04-04-2013, 11:05 AM
AVS Special Member
 
PlasmaPZ80U's Avatar
 
Join Date: Feb 2009
Posts: 7,128
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 59 Post(s)
Liked: 193
Quote:
Originally Posted by ConnecTEDDD View Post

Exactly, Only the X-Rite can access the i1PRO1/2 internally to change these informations. I have send mine to Switzerland and that date was updated after receiving it back. Firmware version stayed the same.

so the build date for my meter could be before 2010?
PlasmaPZ80U is offline  
post #9 of 12 Old 04-04-2013, 11:09 AM - Thread Starter
AVS Special Member
 
ConnecTEDDD's Avatar
 
Join Date: Sep 2010
Location: Athens, Greece
Posts: 2,241
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 69 Post(s)
Liked: 449
Quote:
Originally Posted by PlasmaPZ80U View Post

Quote:
Originally Posted by ConnecTEDDD View Post

Exactly, Only the X-Rite can access the i1PRO1/2 internally to change these informations. I have send mine to Switzerland and that date was updated after receiving it back. Firmware version stayed the same.

so the build date for my meter could be before 2010?

We can't see the build data, a DEV tool maybe is showing that. This Data shows only your last Factory Calibration Date.

Ted's LightSpace CMS Calibration Disk Free Version for Free Calibration Software: LightSpace DPS + CalMAN ColorChecker
S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, CalPC, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1D3, C5
ConnecTEDDD is online now  
post #10 of 12 Old 04-04-2013, 11:40 AM
AVS Special Member
 
PlasmaPZ80U's Avatar
 
Join Date: Feb 2009
Posts: 7,128
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 59 Post(s)
Liked: 193
Quote:
Originally Posted by ConnecTEDDD View Post

We can't see the build data, a DEV tool maybe is showing that. This Data shows only your last Factory Calibration Date.

ok, thanks for all the help
PlasmaPZ80U is offline  
post #11 of 12 Old 05-23-2013, 05:23 PM - Thread Starter
AVS Special Member
 
ConnecTEDDD's Avatar
 
Join Date: Sep 2010
Location: Athens, Greece
Posts: 2,241
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 69 Post(s)
Liked: 449
By Unknown reason, today X-Rite has removed i1Diagnostics 4.0.0.127 from their website and they bring back as the latest version for download the v2.5.1.

Ted's LightSpace CMS Calibration Disk Free Version for Free Calibration Software: LightSpace DPS + CalMAN ColorChecker
S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, CalPC, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1D3, C5
ConnecTEDDD is online now  
post #12 of 12 Old 05-28-2013, 03:33 PM - Thread Starter
AVS Special Member
 
ConnecTEDDD's Avatar
 
Join Date: Sep 2010
Location: Athens, Greece
Posts: 2,241
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 69 Post(s)
Liked: 449
Today the Download Link for 4.0.0.127 is on-line again, same version with the same digital signature. wink.gif

Ted's LightSpace CMS Calibration Disk Free Version for Free Calibration Software: LightSpace DPS + CalMAN ColorChecker
S/W: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, CalPC, ControlCAL
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1D3, C5
ConnecTEDDD is online now  
Reply Display Calibration

User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off